Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-ET25-25 Capacitor - 25V, 25µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Measures .52" in length x .25" in diameter
$0.30
C-ETRX-450 Capacitor - 450V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 450VDC.
Starting at $0.78
C-ETX-450-FT Capacitor - F&T, 450V, Axial Lead Electrolytic
F&T axial lead electrolytic capacitor. Operating temperature range -40°C to 85°C. Made in Germany
Starting at $7.65
C-ET100-350-FT Capacitor - F&T, 350V, 100µF, Axial Lead Electrolytic
F&T axial lead electrolytic capacitor
  • 100 uF/ 350V
  • .98" diameter x 1.47" length
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$7.50
C-D-50V Capacitor - 50V, Ceramic Disc, ± 10%
50V ceramic capacitors with 5mm footprints for use in amplifiers, stomp boxes, and any other electronic project. These capacitors are small and should easily fit in any sized project. These also feature 1” lead lengths so they work great for point to point wiring.
Starting at $0.21
C-ETX-500-IL Capacitor - Illinois, 500V, Axial Lead Electrolytic
Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor
Starting at $4.25
C-ET100-100-FT Capacitor - F&T, 100V, 100µF, Axial Lead
0.41" dia. x 1.21" long. Operating temperature range -40°C to 105°C.
Axial lead electrolytic. Made in Germany.
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
$3.50
C-JP-VTX Capacitor - Jupiter, Yellow Vintage Tone Capacitors, Polyester, Axial Lead
Jupiter Yellow Vintage Tone Capacitors Aluminum Foil Mylar 1960's Style Build. Modeled after the Yellow Astron and Blue Molded capacitors used in American amplifiers of the 50’s and 60’s. Made in the USA of US-made materials.
  • Tone: Very Creamy Break-up.
  • Construction: Polyester/Aluminum Foil/Tape Wrap
  • Tolerance: +/-10%
  • Operating temperature: -55C - 85C, derate 50% at 125C.
  • Leads: 20awg Tinned Copper
  • RoHS Compliant
  • Application: Guitar Amplifier, Guitar Tone Control, Vintage Electronics
Starting at $6.50
C-D-2000V Capacitor - 2000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.
Starting at $0.35
C-CX-500 Capacitor - 500V, Ceramic Disc, ± 10%
Radial ceramic capacitor.
  • Voltage rating: 500VDC
  • Tolerance: ± 10%
Starting at $0.25
C-PEI Capacitor - 100V, Polyester Film Inductive
Package of 5
Polyester film dielectric, aluminum foil electrode, copperply leads and epoxy resin coating in inductive type.
  • Small size, light weight and low cost
  • Dissipation factor is small because the leads are directly welded to electrodes
  • Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
  • 100 volt rating
  • Operating temperature range: -40°C to +85°C.
  • Package of 5
Starting at $0.40
C-ETRX-50 Capacitor - 50V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.
Starting at $0.54
C-ET220-300-FT Capacitor - F&T, 300V, 220µF, Electrolytic
Electrolytic F&T axial lead electrolytic capacitor
  • 220 uF/ 300V
  • .98" diameter x 1.96" length
  • Operating temperature range -40°C to 85°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$8.35
C-MKP Capacitor - Audiophiler, 400V, MKP Metallized Polypropylene
MKP 'Audiophiler' Metallized Polypropylene film audio capacitor, 400v. Rated at 85 degrees.
Starting at $1.29
C-FS-630 Capacitor - Solen, 630V, Metalized Polypropylene, "Fast"
Made of the highest quality aluminum metalized polypropylene film available. Made in France. This superior concept significantly improved the electrical and mechanical characteristics of the film capacitor. They deliver a high level of performance that has never before been achieved.
Starting at $4.59
C-JP-CX Capacitor - Jupiter, Cosmos, Wet Electrolytic, Axial Lead
The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Available ranging from 10uF to 250uF and voltages from 25V to 500V
Starting at $3.49
C-BC-X Capacitor - Vishay BC, Aluminum Electrolytic, 021 ASM Series, Axial Lead
High quality axial-leaded electrolytic capacitors. These 021 ASM series capacitors are produced by Vishay BC, formerly known as Philips / BC. These capacitors have been produced for many years and can be found in a wide variety of music equipment ranging from from vintage amps by Vox and Marshall to classic fuzz pedals such as the Fuzz Face and Tonebender. Suggested applications include general purpose use, industrial, automotive, audio-video, coupling, decoupling, smoothing, filtering, buffering, portable and mobile equipment. Features
  • Long useful life: 2500 h to 8000 h at 85 °C
  • Miniaturized, high CV-product per unit volume
  • Charge and discharge proof
  • Polarized aluminum electrolytic capacitors, non-solid electrolyte
  • Axial leads, cylindrical aluminum case, insulated with a blue sleeve
Starting at $1.70
C-D-3000V Capacitor - 3000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 3kV, ± 10% tolerance.
Starting at $0.40
C-MOD-X Capacitor - Mod® Electronics, 600V, Oil Filled, Axial Lead
Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil.
Starting at $3.95
C-EC50-50-500 Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$10.50
C-S-1600 Capacitor - Orange Drop, 1600V, Polypropylene
Radial lead, polypropylene film capacitor. ± 10% tolerance. Features a long history of proven reliability, a low dissipation factor, excellent stability, and a virtually linear temperature coefficient.
Starting at $1.49
C-ET-500-JJ Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $7.75
C-M-400 Capacitor - Mallory, 400V, 150s, Axial Lead
Mallory axial capacitors rated for 400V. The available values are smaller in size than the 630V versions for builds where less space is available. These are also a great choice for use as guitar tone capacitors over the larger 630V versions. The Type 150 series axial lead metallized polyester non inductive capacitors are available in bulk or on tape and reel for automatic insertion. Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications. Features
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
$1.25
C-ET-350 Capacitor - 350V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $1.05
Don't see what you're looking for? Send us your product suggestions!