Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-ET-X-MOD Capacitor - Mod® Electronics, Aluminum Electrolytic, 105°C, Axial Lead
Mod® Electronics electrolytic capacitors provide builders with quality capacitors that offer long-lasting performance at the highest degree. These capacitors are designed with tube amplifiers in mind; each capacitor is rated at 105°C. This temperature rating provides a highly-stable capacitance in any device, be it vacuum tube or solid state. The Mod® electrolytic capacitor line features capacitance values that are common in many vintage amplifiers but are not readily available today. Builders and techs can confidently use these capacitors to match the original specifications of their equipment.
Starting at $0.65
C-SA Capacitor - Sprague Atom, Aluminum Electrolytic
Aluminum Capacitors +85 °C, axial lead. The best electrolytic money can buy. Features:
  • Low leakage current
  • Long shelf life
  • Ideal for application in TV sets, auto radios, radio-phone combinations, electronic testing equipment
Starting at $2.95
Partially Out of Stock
C-G-100 Capacitor - Orange Drop, 100V, Polyester
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:
  • Non- inductively wound polyester film/foil construction
  • Radial lead
  • 10% tolerance
  • 100v voltage rating
  • Rated for 85°C operation
  • Tinned copper-clad steel leads
Starting at $2.15
C-BC-X Capacitor - Vishay BC, Aluminum Electrolytic, 021 ASM Series, Axial Lead
High quality axial-leaded electrolytic capacitors. These 021 ASM series capacitors are produced by Vishay BC, formerly known as Philips / BC. These capacitors have been produced for many years and can be found in a wide variety of music equipment ranging from vintage amps by Vox and Marshall to classic fuzz pedals such as the Fuzz Face and Tonebender. Suggested applications include general purpose use, industrial, automotive, audio-video, coupling, decoupling, smoothing, filtering, buffering, portable and mobile equipment. Features
  • Long useful life: 2500 h to 8000 h at 85 °C
  • Miniaturized, high CV-product per unit volume
  • Charge and discharge proof
  • Polarized aluminum electrolytic capacitors, non-solid electrolyte
  • Axial leads, cylindrical aluminum case, insulated with a blue sleeve
Starting at $1.75
C-ET100-100-FT Capacitor - F&T, 100V, 100µF, Axial Lead
Electrolytic F&T axial lead electrolytic capacitor
  • 100 uF/ 100V
  • 0.41" diameter x 1.21" length
  • Operating temperature range -40°C to 105°C
  • Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability
$3.50
C-JP-VTX Capacitor - Jupiter, Yellow Vintage Tone Capacitors, Polyester, Axial Lead
Jupiter Yellow Vintage Tone Capacitors Aluminum Foil Mylar 1960's Style Build. Modeled after the Yellow Astron and Blue Molded capacitors used in American amplifiers of the 50’s and 60’s. Made in the USA of US-made materials.
  • Tone: Very Creamy Break-up.
  • Construction: Polyester/Aluminum Foil/Tape Wrap
  • Tolerance: +/-10%
  • Operating temperature: -55C - 85C, derate 50% at 125C.
  • Leads: 20awg Tinned Copper
  • RoHS Compliant
  • Application: Guitar Amplifier, Guitar Tone Control, Vintage Electronics
Starting at $6.50
C-PEI Capacitor - 100V, Polyester Film Inductive
Polyester film dielectric, aluminum foil electrode, copperply leads and epoxy resin coating in inductive type.
  • Small size, light weight and low cost
  • Dissipation factor is small because the leads are directly welded to electrodes
  • Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
  • 100 volt rating
  • Operating temperature range: -40°C to +85°C.
  • Package of 5
Starting at $0.40
package of 5
C-D-100V Capacitor - 100V, Ceramic Disc, ± 10%
100 V ceramic disc capacitors. ± 10% tolerance.
Starting at $0.25
C-JP-CX Capacitor - Jupiter, Cosmos, Wet Electrolytic, Axial Lead
The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Available ranging from 10uF to 250uF and voltages from 25V to 500V
Starting at $4.99
C-ETX-100-IL Capacitor - Illinois, 100V, Axial Lead Electrolytic
Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor
Starting at $0.50
C-ET70-100 Capacitor - Axial Lead Electrolytic, 70µF, 100VDC
High quality low leakage axial lead electrolytic capacitor
  • 70uF/100V
  • Rated for 85° C operation
  • Tolerance: -20%, +50%
  • Measures 0.51" dia. x 0.84" length
$1.00
C-ETR100-100 Capacitor - 100V, 100µF, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.
$0.90
package of 5
C-MD68-100 Capacitor - Mallory, 100V, 0.68 µF, 150s, Axial Lead
0.68uF Mallory axial capacitors rated for 100V. This value is popular for cathode bypass capacitors in many vintage Marshall amps. The 8.5x20.5mm size works well for turret board builds of these classic amplifiers. The Type 150 series are axial lead metallized polyester non inductive capacitors. Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications. Features
  • Epoxy end fill meets UL94V-0
  • Non inductively wound
  • Flame retardant outer wrap meets UL510
  • Non polar
$3.95
C-368-X-100 Capacitor - Vishay BC, 100V, MKT368, Radial Lead
High quality radial capacitors rated at 100V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features
  • Polyester film dielectric
  • Vacuum deposited aluminum electrodes
  • Wound mono construction
  • Flame retardant epoxy material (UL-class 94 V-0)
  • Tinned wire radial leads
  • Performance Grade 1 (long life)
  • ±10% tolerance
  • Rated 100VDC

Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
Starting at $1.15
Don't see what you're looking for? Send us your product suggestions!