Capacitors

± 5% tolerance radial lead capacitor, dipped in epoxy coating. 1000pF = 1nF = 0.001µF

Operating temperature range -40°C to 85°C. Axial lead electrolytic. Made in Germany. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.

Mod® Electronics electrolytic capacitors provide builders with quality capacitors that offer long-lasting performance at the highest degree. These capacitors are designed with tube amplifiers in mind; each capacitor is rated at 105°C. This temperature rating provides a highly-stable capacitance in any device, be it vacuum tube or solid state. The Mod® electrolytic capacitor line features capacitance values that are common in many vintage amplifiers but are not readily available today. Builders and techs can confidently use these capacitors to match the original specifications of their equipment.

Aluminum Capacitors +85 °C, axial lead. The best electrolytic money can buy. Features:

• Low leakage current
• Long shelf life
• Ideal for application in TV sets, auto radios, radio-phone combinations, electronic testing equipment

SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.

Made in Germany. 1-⅜" x 2". Clamp required. Similar to LCR.

The BlueMolded line of polyester film capacitors are retrofits for Astron or Blue Molded caps used in vintage tweed, brown, and blackface Fenders®. These capacitors amazingly capture vintage Fender® tones of the Blackface era, and the famous 1959 tweed 5F6-A Bassman era which is so musical and good, Marshall™ modeled their amps after them! After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers.

Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor

Radial ceramic capacitor.

• Voltage rating: 500VDC
• Tolerance: ± 10%

The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Available ranging from 10uF to 250uF and voltages from 25V to 500V

Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.

• Operating temperature: -25°C to 70°C
• Nominal Voltage: 500Vdc
• Rated Capacitance: 30µF - 100 µF (depending on capacitor)
• Capacitance tolerance (at 100Hz, 20°C): -10%+30%
• Dissipation factor (at 100Hz, 20°C): 0.18
• Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can

JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long

This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.

Axial electrolytic capacitor.

• Capacitance: 80µF
• Tolerance: ±20%
• Temperature range: -40°C +85°C.
• Voltage rating: 500VDC

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 40/20/20uF 500VDC Electrolytic.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1 3/8"D X 2 1/2"H.

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery

• 100/100uF - 500VDC Electrolytic
• FP / Twist Lock Style. Solder Tabs
• -10%, +50% Tolerance, 55°C Temperature Rating
• 1 ⅜"D X 4"H

Axial lead two section electrolytic 16/16µF, 500V. Made in Germany. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.

This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.

Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.

• Rated voltage: 16/16µF
• Operating temperature: -25°C - 70°C
• Rated voltage: 500VDC
• Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
• Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)

JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications