Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-SA Capacitor - Sprague Atom, Aluminum Electrolytic
Aluminum Capacitors +85 °C, axial Lead. The best electrolytic money can buy.
Starting at $2.50
C-ET-500-JJ Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $6.50
C-EC20X4-475 Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.

Great replacement for the can capacitor in the Princeton AA964, Princeton AB1270, Princeton Reverb AA1164, Princeton Reverb AA760 and Princeton Reverb AB1270.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$36.70
C-EC40-20X3-500 Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$15.70
C-MKP Capacitor - Audiophiler, 400V, MKP Metallized Polypropylene
MKP 'Audiophiler' Metallized Polypropylene film audio capacitor, 400v. Rated at 85 degrees.
Starting at $1.24
C-EC40-20-20 Capacitor - CE Mfg., 500V, 40/20/20 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20uF 500VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 2 1/2"H.
$38.80
C-EC4020X2-525 Capacitor - CE Mfg., 525V, 40/40/20/20 μF
CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery.
$40.90
C-EC80-40-30-20 Capacitor - CE Mfg., 525V, 80/40/30/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 80/40/30/20uF 525VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-3/8" Dia. X 3-1/2" H.

Great replacement for the can capacitor in the Princeton 6G2.
$44.05
C-EC40-20X3-525 Capacitor - CE Mfg., 525V, 40/20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/20/20/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 2 1/2"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90
C-EC20X3-450 Capacitor - CE Mfg., 450V, 20/20/20µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. 3 sections 20µF at 450VDC. 85°C temp rating.
Great replacement for the can capacitor in the Champ AA764, Vibro-Champ AA764, and Bronco Amp AB764.
$37.75
C-EC30-20X3-525 Capacitor - CE Mfg., 525V, 30/20/20/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/20/20/20uF 525VDC Electrolytic. Used In Dyanaco ST-70 Amplifiers.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3 1/2"H.
$40.90
C-EC20X3-525 Capacitor - CE Mfg., 525V, 20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
$38.80
C-EC2010X2-475 Capacitor - CE Mfg., 475V, 20/20/10/10µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
  • -10%, +50% tolerance
  • 55° temperature rating
  • 1-3/8" diameter x 3" tall
$36.70
C-EC1020X3-450 Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
$30.50
C-EC20-10-10-10 Capacitor - CE Mfg., 450V, 20/10/10/10 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
  • FP / Twist lock style, Solder tabs.
  • -10%, +50% Tolerance
  • 85°C temperature rating.
  • 1 3/8"D X 2 1/2"H.

*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
$38.80
C-EC40-40-30-20-400 Capacitor - CE Mfg., 400V, 40/40/30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/30/20uF 400VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.

Great replacement for the Echoplex EP-1.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
$40.90
C-EC80-50-20-20-350 Capacitor - CE Mfg., 350V, 80/50/20/20µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
C-EC80-40-40-20-PC Capacitor - CE Mfg., 525V, 80/40/40/20uF, PC Mount
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 80/40/40/20 µF 525VDC
  • PC Mount Tabs.
  • -10%, +50% Tolerance
  • 55°C Temperature Rating.
$44.05
C-EC30-20-475 Capacitor - CE Mfg., 475V, 30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. The C-EC30-20-475 is a great replacement for the original can capacitors found in H.H. Scott 299 amplifiers as well as others.
$36.70
C-EC100X3-20-200 Capacitor - CE Mfg., 200V, 100/100/100/20µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
$38.95
Don't see what you're looking for? Send us your product suggestions!