Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Peavey

Hartley Peavey founded Peavey Electronics, one of the world's largest manufacturers and suppliers of musical and professional audio equipment, in 1965, having built his first amplifier in 1957.

Musicap

MusiCaps aim to offer an improvement in clarity, focus, and dynamics when used in audio applications.

JJ Electronics

JJ vacuum tubes and capacitors are widely used in guitar and audio amplifiers, recording studio equipment and in a variety of applications for audiophiles.

Illinois

Illinois Capacitor is a manufacturer of aluminum electrolytic, aluminum polymer, metalized film and power film capacitors for electronics.
C-U-630V Capacitor - 630V, Polypropylene, axial leads
± 10% tolerance. Rated to 105°C. Non-inductive, polypropylene film axial lead capacitor with self healing windings. Made by Illinois Capacitor.
Starting at $0.75
C-ETX-50-IL Capacitor - Illinois, 50V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. Axial leads. Rated for 50V max.
Starting at $0.33
C-ET-500-JJ Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $6.50
C-EC40-20X3-500 Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$15.70
C-EC50-50-500 Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$8.95
C-ETX-500-IL Capacitor - Illinois, 500V, Axial Lead Electrolytic
Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor
Starting at $3.95
C-ETX-350-IL Capacitor - Illinois, 350V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $1.65
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$11.50
C-EC32-32-500 Capacitor - JJ Electronics, 500V, ~\frac{32}{32}~ μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$8.45
C-ETX-450-IL Capacitor - Illinois, 450V, Axial Lead Electrolytic
Rated for 85 degree operation.
Starting at $5.80
C-ETX-100-IL Capacitor - Illinois, 100V, Axial Lead Electrolytic
Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor
Starting at $0.34
C-EC250-500 Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$12.95
C-ET220-300-IL Capacitor - Illinois, 300V, 220µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%. Measures 1.03" diameter X 1.97" height
$6.95
C-PV4700-55-A Capacitor - Peavey, 55V, 4700µF, Axial Lead
Peavey 4700 µF @ 55V polarized electrolytic capacitor with axial leads. 7/8" diameter x 2" length.
$6.95
C-EC220-385 Capacitor - JJ Electronics, 385V, 220µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
$7.95
C-EC16-16-500 Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
$8.25
C-EC350-385 Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$9.75
C-EC100-385 Capacitor - JJ Electronics, 385V, 100µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$7.35
C-EC500-500 Capacitor - JJ Electronics, 500V, 500µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 500 µF -10%+30% @ 500 V. 1 3/8" diameter x 3 1/2" height (35 x 88 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$16.95
C-EC550-385 Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor.
Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
$12.50
C-EC47-385 Capacitor - JJ Electronics, 385V, 47µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 47µF -10%+30% @ 385 V. 7/8" diameter x 1-5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications
$5.95
C-EC800-385 Capacitor - JJ Electronics, 385V, 800µF, Electrolytic
1 3/8" diameter x 3 1/2" height. Similar to LCR
$14.95
C-MCS-100 Capacitor - MusiCap, 100V, Film & Foil Polypropylene
Critical loudspeaker crossovers deserve to have a transparent product specific to the application. Speaker MusiCaps, with their thicker leads, are a revelation in well-designed crossover networks. While a fully MusiCap-ed crossover is supreme, just installing MusiCaps in the tweeter circuit will reveal much additional detail and nuance. Many prominent high-end loudspeaker manufacturers have been using MusiCaps in their top models for years.
Starting at $21.65
Save 37%
Originally: $34.40
C-ET100-25-IL Capacitor - Illinois, 25V, 100µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%
$0.55
Don't see what you're looking for? Send us your product suggestions!