Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.

Mallory

Illinois

Illinois Capacitor is a manufacturer of aluminum electrolytic, aluminum polymer, metalized film and power film capacitors for electronics.

JJ Electronics

JJ vacuum tubes and capacitors are widely used in guitar and audio amplifiers, recording studio equipment and in a variety of applications for audiophiles.
C-T-630V Capacitor - 630V, Metal Film, Tubular
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 630 Volts.
Starting at $0.44
C-ETRX-50 Capacitor - 50V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.
$0.49
C-U-630V Capacitor - 630V, Polypropylene, axial leads
± 10% tolerance. Rated to 105°C. Non-inductive, axial lead capacitor with self healing windings. Polypropylene film capacitor. Made by Illinois Capacitor. Capacitance SKU Original Part Number Dimensions .001 µF C-UD001-630 102K630V 0.25" x 0.58" .0022 µF C-UD0022-630 222K630V 0.25" x 0.58" .0033 µF C-UD0033-630 332K630V 0.25" x 0.58" .01 µF C-UD01-630 103K630V 0.26" x 0.58" .022 µF C-UD022-630 223K630V 0.34" x 0.58" .047 µF C-UD047-630 473K630V 0.36" x 0.81" .1 µF C-UD1-630 104K630V 0.42" x 1.15" .22 µF C-UD22-630 224K630V 0.50" x 1.34" .47 µF C-UD47-630 474K630V 0.71" x 1.34"
Starting at $0.75
C-ETRX-25 Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.49
C-ET-450 Capacitor - 450V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. 
Starting at $1.10
C-M Capacitor - Mallory, 630V, 150s, Axial Lead
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Non-Inductive, Self Healing

Please Note: Color of capacitor may vary from one production run to another.
Starting at $0.87
C-ET-160 Capacitor - 160V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $0.55
C-ET-50 Capacitor - 50V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. 
Starting at $0.25
C-ET-500-JJ Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $6.50
C-ETX-50-IL Capacitor - Illinois, 50V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. Axial leads. Rated for 50V max.
Starting at $0.33
C-ETR100-100 Capacitor - 100V, 100µF, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 100VDC.
$0.79
C-ETRX-450 Capacitor - 450V, Radial Lead, Electrolytic
High quality, radial leaded, aluminum electrolytic capacitors rated at 450VDC.
Starting at $0.69
C-EC50-50-500 Capacitor - JJ Electronics, 500V, 50/50µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can
$8.95
C-ETX-500-IL Capacitor - Illinois, 500V, Axial Lead Electrolytic
Illinois Capacitor Inc. high quality low leakage axial lead electrolytic capacitor
Starting at $3.95
C-EC40-20X3-500 Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
$15.70
C-ET-350 Capacitor - 350V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $0.98
C-ETX-350-IL Capacitor - Illinois, 350V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $1.65
C-T-400V Capacitor - 400V, Metal Film, ± 10%
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 400 Volts.
Starting at $0.40
C-ET80-500 Capacitor - 500V, Axial Lead Electrolytic, 80µF
Axial electrolytic capacitor.
  • Capacitance: 80µF
  • Tolerance: ±20%
  • Temperature range: -40°C +85°C.
  • Voltage rating: 500VDC
$2.50
C-EC100X2-500 Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
$11.50
C-ET16-475 Capacitor - 475V, Axial Lead Electrolytic, Capacitance: 16 uF
  • 16µF, 475VDC
  • Rated for -25° C through +85° C
  • Tolerance ± 20%
  • Ripple current rated at 90mA rms at 120 Hz 105° C
  • Measures 26mm in length x 13mm in diameter.
$1.95
C-EC32-32-500 Capacitor - JJ Electronics, 500V, ~\frac{32}{32}~ μF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long
$8.45
C-ETX-450-IL Capacitor - Illinois, 450V, Axial Lead Electrolytic
Rated for 85 degree operation.
Starting at $5.80
C-ET220-300-IL Capacitor - Illinois, 300V, 220µF, Axial Lead Electrolytic
Rated for 85 degree operation. Tolerance ±20%. Measures 1.03" diameter X 1.97" height
$6.95
Don't see what you're looking for? Send us your product suggestions!