Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
C-T-630V Capacitor - 630V, Metal Film, Tubular
± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 630 Volts.
Starting at $0.44
C-SA Capacitor - Sprague Atom, Aluminum Electrolytic
Aluminum Capacitors +85 °C, axial Lead. The best electrolytic money can buy.
Starting at $2.50
C-ETX-500-FT Capacitor - F&T, 500V, Type A, Axial Lead
Operating temperature range -40°C to 85°C. Axial lead electrolytic. Made in Germany. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
Starting at $3.95
C-S-600 Capacitors - Orange Drop, 600V, Polyester
Rated for 85°C operation. Polyester film capacitor with radial leads. ± 10% tolerance. Features a long history of proven reliability, a low dissipation factor, excellent stability, and a virtually linear temperature coefficient.
Starting at $0.79
C-SM Capacitor - 500V, Silver Mica, ± 5%
± 5% tolerance radial lead capacitor, dipped in epoxy coating. 1000pF = 1nF = 0.001µF
Starting at $0.45
C-ET-X-MOD Capacitor - Mod® Electronics, Aluminum Electrolytic, 105°C, Axial Lead
Mod® Electronics electrolytic capacitors provide builders with quality capacitors that offer long-lasting performance at the highest degree. These capacitors are designed with tube amplifiers in mind; each capacitor is rated at 105°C. This temperature rating provides a highly-stable capacitance in any device, be it vacuum tube or solid state. The Mod® electrolytic capacitor line features capacitance values that are common in many vintage amplifiers but are not readily available today. Builders and techs can confidently use these capacitors to match the original specifications of their equipment.
Starting at $0.35
C-P-600V Capacitor - 600V, 716P Series, Polypropylene
High performance version of the popular 715P series. They are made from polypropylene film and foil with pure copper leads, making them ideal for high pulse current applications. Rated for 85 degrees celsius operation ± 5% tolerance. Straight radial leads, minimum 1.25" length.
Starting at $0.95
C-U-630V Capacitor - 630V, Polypropylene, axial leads
± 10% tolerance. Rated to 105°C. Non-inductive, polypropylene film axial lead capacitor with self healing windings. Made by Illinois Capacitor.
Starting at $0.75
C-ETRX-50 Capacitor - 50V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.
$0.49
C-L Capacitor - 630V, Polypropylene, radial leads
Polypropylene film capacitor.
  • Tolerance: ±10%
  • Radial leads
  • Voltage rating: 630VDC
Starting at $0.34
C-ZYD-500 Capacitor - SoZo, 500V, NexGen Yellow Mustard Vintage
SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.
Starting at $3.95
C-ETRX-25 Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.49
C-R-600 Capacitor - 600V, 715P Series, Polypropylene
Rated for 85°C operation. Polypropylene film capacitor with radial leads. ± 5% tolerance.
Starting at $1.09
C-ECX-XFT Capacitor - F&T, Multi-Section, Electrolytic
Made in Germany. 1-⅜" x 2". Clamp required. Similar to LCR.
Starting at $9.95
C-ZBD-500 Capacitor - SoZo, 500V, NexGen Blue Molded Vintage
The BlueMolded line of polyester film capacitors are retrofits for Astron or Blue Molded caps used in vintage tweed, brown, and blackface Fenders®. These capacitors amazingly capture vintage Fender® tones of the Blackface era, and the famous 1959 tweed 5F6-A Bassman era which is so musical and good, Marshall™ modeled their amps after them! After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers.
Starting at $4.95
C-ET-450 Capacitor - 450V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. 
Starting at $1.10
C-FS-630 Capacitor - Solen, 630V, Metalized Polypropylene, "Fast"
Made of the highest quality aluminum metalized polypropylene film available. Made in France. This superior concept significantly improved the electrical and mechanical characteristics of the film capacitor. They deliver a high level of performance that has never before been achieved.
Starting at $2.15
S-H122 Capacitor Clamp - 1.375" diameter, for vertical mounting
Circular clamp for mounting multi-section can capacitors directly to chassis. This clamp is for use with 1 3/8" (1.375") diamter capacitors. Includes one clamp with tightening hardware. Mounting hardware is sold seperately.
  • Mounting hole center to center - 1.938"
  • Mounting holes - .188" x .281"
$1.75
C-M Capacitor - Mallory, 630V, 150s, Axial Lead
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Non-Inductive, Self Healing

Please Note: Color of capacitor may vary from one production run to another.
Starting at $0.87
C-P-400V Capacitor - 400V, 716P Series, Polypropylene
High performance version of the popular 715P series. They are made from polypropylene film and foil with pure copper leads, making them ideal for high pulse current applications. Rated for 85 degrees celsius operation ± 5% tolerance. Straight radial leads, minimum 1.25" length.
Starting at $1.25
C-ET-160 Capacitor - 160V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Starting at $0.50
C-ET-50 Capacitor - 50V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. 
Starting at $0.25
C-ETX-450-FT Capacitor - F&T, 450V, Axial Lead Electrolytic
F&T axial lead electrolytic capacitor. Operating temperature range -40°C to 85°C. Made in Germany
Starting at $6.95
C-ET-500-JJ Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Starting at $6.50
Don't see what you're looking for? Send us your product suggestions!