Cables

The Fender® Original Series raises the bar for quality and reliability with their coiled cables. This cable uses a 23 gauge 99.95% oxygen free copper conductor with a 90% shield and a classic Fender® color for the insulation. These hand soldered cables use nickel plated ¼” connectors with a right angle and one straight plug.

Easy to use cable tie gun cuts ties up to 50 lb. tensile. Use this tool to pull ties tightly and then cut the excess length.

A 6.5mm 2P braided microphone cable. Specifically designed to prevent shocks and allows for minimum hum or noise. Provides 100% signal!
Braided XLR Female to 1/4" phone plug, High Z

A 6.5mm 2P braided microphone cable. Specifically designed to prevent shocks and allows for minimum hum or noise. Provides 100% signal!
Braided XLR Female to XLR Male phone plug, High Z

High quality hand-soldered instrument cables from ProCo. The Excellines line is comprised of highly regarded instrument cables used by professionals and musicians worldwide. This instrument cable features ProCo's 20 AWG, cable, with a very durable & flexible jacket and ¼" Neutrik right angle plug to ¼" Neutrik straight plug.
Features:

• Unbalanced instrument/patch cable, 1/4" TS Male - Right Angle 1/4" TS Male
• Metal Neutrik connectors for reliability
• Exceptional shielding and construction
• Limited Lifetime replacement warranty through Pro Co

Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.

Professional grade ProCo Excelline premium speaker cable. ProCo Excelline cables just work, assuring that the only distortion in your sound comes from your pedal-board. Sometimes buzz or distortion is good—but not when it comes from a bad cable. 2-conductor, 16 AWG. Made In USA.

Fully Assembled version: Package includes two vintage style RCA cables: One 3 foot and one 5 foot.
DIY Kit: Assembly required. Kit comes with one 3 ft. and one 5 ft. length of insulated braided wire and 4 RCA plugs. Solder RCA plugs onto the ends of the wires by stripping 3/8" of the white insulation from wire. Insert wire into tip. Solder in place. Next, solder braided shielding to sleeve of the plug.

ProCo cable is the world renown industry standard. The excellines cable are the musician's choice when it comes to guitar cable made with G&H ¼" BigFoot straight phone plug to ¼" Bigfoot right angle phone plug.

A 6.5mm noiseless cable equipped ¼" straight molded phone plug ends. Specifically designed cables prevent shocks and allows for minimum hum or noise. Provides 100% signal!
Black Cable with Nickel Plated 'Grover' Engraved Plugs

A 6.5mm noiseless cable equipped ¼" straight molded phone plug ends. Specifically designed cables prevent shocks and allows for minimum hum or noise. Provides 100% signal!
Braided Fabric Covered Cable with Gold Plated Plugs

ProCo StageMaster low-impedance microphone cables are designed to be quiet, durable and dependable. These cables are hand-soldered with top-quality metal XLR connectors and extremely low-noise, twisted-pair wire.

• Quiet and Durable CS-MIC.K 2-conductor Shielded Audio Cable
• Terminated with High Quality Nickel Plated XLR Connectors for Years of Superior Performance and Maximum Value
• Individually Tested to Meet Performance and Quality Requirements

ProCo StageMaster cables are designed to be quiet, durable and dependable. Constructed from high quality materials and built to withstand everyday use. They are hand-soldered to perfection using top quality metal 1/4” connectors and extremely low-noise cable.

Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the Power-All® ECO-Dapter® 9 VDC power supply to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).

High quality hand-soldered instrument cables from ProCo. The Excellines line is comprised of highly regarded instrument cables used by professionals and musicians worldwide. Excellines instrument cables feature ProCo's 20 AWG, cable, with a very durable & flexible jacket and 1/4" Neutrik straight plug to 1/4" Neutrik straight plug. Available in a variety of lengths.
Features:

• Unbalanced instrument/patch cable, 1/4" TS Male - 1/4" TS Male
• Metal Neutrik connectors for reliability
• Exceptional shielding and construction
• Limited Lifetime replacement warranty through Pro Co

24AWG StageMASTER Instrument Cables are designed to be quiet, durable and dependable. They are hand-soldered to perfection using top quality metal ¼" connectors and extremely low-noise cable.

Vintage style speaker cable. ¼" plug to (2) spade lugs. Perfect replacement for vintage guitar amps where the speaker plugs directly into the chassis. 34" total length.

Right angle RCA cables for Reverb Tanks and other electronic devices.

Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a ⅛" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the ECO-Dapter® itself.

Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Black/R allows the user to power over-sized effect units or units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain. The Cable-Black can be connected to any plug on any Power-All daisy chain, or directly to the ECO-Dapter® itself.

Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the ECO-Dapter®. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips. The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug. the Cable-Green/R can be connected to the male plugs on any Power-All Daisy Chain, or directly to the ECO-Dapter® itself.

Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Red/R allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection. The Cable-Red/R can be hooked to any plug on any of the Power-All daisy chains, or directly to the Power-All.

Included in the PA-9ECB Basic Kit and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.

Connector - for Accutronics Blue reverb tanks P-RAMC2BF2 and P-RAMC2BF3. One green and one red per item.