Click to zoom in
Customer Images:

# Bridge/Tailpiece - Gotoh, Combination, Stud Mount

Starting at: \$44.95
Product Options
• Chrome
are currently out of stock and will be placed on backorder.

Stud Mount Adjustable Bridge, Chrome, 2-$\frac{1}{16}$" String, 3-¼" Stud. Hardware included.

RoHS Compliant
SKU:
P-GGT-35-X
Item ID:
009812
Brand:
Standard Series
Type:
Part Numbers
ColorOur Part NumberUPC/EAN
ChromeP-GGT-35-C609722145190
GoldP-GGT-35-G609722145206
 Item Depth 13.2 mm Item Height 30 mm Item Width 102 mm Metric Thread Major Diameter 8 mm Mounting Hole Center To Center 82 mm String Spacing 10.8 mm
 Packaging Dimensions 5.2 in. × 2.42 in. × 0.78 in. Weight (Packaging) 0.47 lbs.

## Specifications, Files, and Documents

Dimensions (44.65 KB)

Click each question to see its answers.
Asked by Anonymous on April 28th, 2017. 1 person subscribed to this question
April 28th, 2017
The center to center spacing on this tailpiece is 82mm.
Asked by Anonymous on August 3rd, 2017. 1 person subscribed to this question
August 4th, 2017
The distance of 13.2mm (0.5196") is from the bottom of the bridge to the top of either the 6th string or 1st string saddle.
Asked by Anonymous on August 4th, 2017. 1 person subscribed to this question
August 4th, 2017
The stud locks into the bridge using a retainer clip and then is secured using a set screw for increased tuning stability.
Asked by Anonymous on August 4th, 2017. 1 person subscribed to this question
August 4th, 2017
Yes, this could be used in place of a standard bridge/tailpiece combo. I would suggest referencing the spec sheet pdf included on this page for true compatibility based on your specific guitar's measurements as the Gotoh products are generally metric.
Asked by Anonymous on September 8th, 2017. 1 person subscribed to this question
September 8th, 2017
These are made out of Zinc.
Asked by Anonymous on January 21st, 2019. 1 person subscribed to this question
January 29th, 2019
Staff Member
This appears to be an acceptable replacement for that guitar, provided that it uses a single wraparound style bridge (center to center on the mounting posts needs to be 82mm) and not the stopbar/tune-o-matic combination.

## Product Reviews

5.00 out of 5 based on 3 reviews
- June 8th, 2019

Very Good , Lots of Sustain Compare to the Aluminium Bridge that came with the Guitar

- January 20th, 2019

I replaced the one that came on my Epiphone LP Jr. This one gave me lower action than was possible with the other style bridge. It fit directly onto the stock stud holes, so I just screwed in the new studs. Done in 15 min. This one goes to 11!

- June 11th, 2014

If you own any guitar [PRS, Gibson LP JR, Epiphone, etc.] which have a wrap around bridge and are sick and tired of losing a good intonation span due to their limited and really not so great design... then do what I did, buy from Amplified Parts a Gotoh Combination Bridge/Tailpiece, quality made in Japan. I purchased the Gotoh Chrome 510UB [Sku# P-GGT-35-C] - they come in other colors. There is no comparison, no better value for the price point to this excellent bridge you will get both in string tuning stability plus tone.. this is a small investment with a ton of results... however, remember, if you have an expensive guitar and make modifications like this, it could reduce the value of your instrument as collectors and resellers do take into consideration the factory delivery of any instrument.. so, save the old parts if you can to retain the possible value... Installation of the Gotoh 510UB takes some skill to adjust it so I've included some instructions to help.. get one, get many from Amplified Parts.. and good luck!
The Gotoh 510UB bridge/tailpiece has 4 adjustable areas:
1. Bridge height to get the optimum string/fretboard clearance. Done with post screws up or down to ensure your desired string action and height [careful of buzz!]. This will take a few adjustments,, you'll get there! Don't forget to ensure the bridge ground wire is inserted into one post to avoid ground issues. There are holes on both of the posts included.
2. Final lockdown using smallest Allen key [comes with kit] once height setting is found. Carefully insert the smaller Allen key into height post and lock down.. do not over torque.
3. Forward and backward movement of the left and right of the bridge posts for general intonation using the larger Allen key.