Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Made in U.S. vintage spec ABR-1 bridge with no retaining wire. Bridge posts and thumb screws included.
The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and plated brass saddles. Hardware sold separately. See P-GKLU-KLP127X for a complete set. The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired. Hardware included.
The bridge features the vintage-style retaining wire that secures the brass saddles and intonation screws onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

Made in U.S. vintage-spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with raw brass saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP128X. The bridge features the vintage-style retaining wire that secures the raw brass saddles and intonation screws onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included.
ABR-1 bridge with nylon saddles. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!

Vintage style ABR bridge. Wired. Hardware included The saddles on this ABR bridge are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just as the vintage originals were designed.

• Thumbwheels and threaded rod included
• Made In Korea

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and nylon saddles. Hardware sold separately. See P-GKLU-KLP1273N for a complete set. The bridge uses string tension along with the set screws to secure the nylon saddles onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

The Gotoh Relic GE104B bridge is a convincingly aged part that is perfect for a vintage or relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This bridge features zinc saddles, a 52mm string spacing, a 400mm radius, and 74mm stud spacing. M4 threaded mounting posts and thumb screws are included.

A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.

Made in U.S. modern-spec tune-o-matic bridge with no retaining wire. This bridge is fully plated and comes with pre-slotted saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP120XC. This Nashville bridge is a great upgrade that features wider intonation adjustments and a larger mass for better tone and sustain.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm
• For use with 4.95mm stud posts

Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part.

• Thread = M5 - 0.8 Metric (as used by Gibson on Nashville Models)
• Post to Post Spacing = 2.93 in. (74.5mm)
• Saddle Notch = Center Notched Saddles
• Saddle Material = Zmac
• Bridge Material = Zmac
• Post/Thumbwheel Material = Brass
• Radius = 12 inch
• Post Top Diameter = .195 Inches / 4.95mm
• Bridge Center To Center Spacing = 2.93 inches
• Saddle Spacing = 10.4 mm