Bracket - Bigsby, Chet Atkins, top piece

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

P-SBRKT2 Bracket - for 9 Pin vacuum tube socket
Washer fits around sockets to hold them to chassis.
$0.67
S-HMB-JEN Bracket - for PCB mounting, replica of Vintage Fuzz
Mounting bracket for vintage fuzz PCBs. This bracket is an exact replica of the bracket found in the Italian made Vox Tone Bender V828 pedals. The mounting width for the board is 1.35” which fits the P-PC-FUZZ-JEN, P-PC-BEND-MKII-BRN, and any other vintage spacing (0.15”) stripboard. The PCB mounting holes are threaded for M3 screws (sold separately). The two potentiometer holes are spaced 1.95” center to center and fit potentiometers with ⅜” bushings or smaller.
$5.95
P-SBRKT Bracket - for 8 Pin vacuum tube sockets
Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.
$0.67
P-ST8-807 Socket - 8 pin octal, Sleeve Connectors, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
  • Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
$2.80
R-VSN-XL-SS Potentiometer - Linear, Solid Shaft, Snap-In, Bracket
Linear. 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.50
R-VSN-XL-DS Potentiometer - Linear, D Shaft, 16mm, Snap-In, Bracket
Linear. 16mm body size (mini type) Snap-In pot with mounting bracket. D-Shaft ¼", ½" length shaft. 7mm bushing, ¼" bushing length. PC Mount. Nut and washer included
$1.40
P-ST8-809 Socket - 8 pin octal, Fork Connectors, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
  • Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
$2.80
P-T154-P-T156-X Filter Choke - Hammond, Open Bracket
Features
  • Economical "open bracket" - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.
Starting at $16.75
Partially Out of Stock
Note:
P-T155B:6 mH / 2 A
P-T154G:9 H / 40 mA (700 ohm)
P-T155C:60 H / 8 mA
are special order items.
Note: some of these items are special order items.
R-VSN-XC-DS Potentiometer - Reverse Audio, D Shaft, 16mm, Snap-In, Bracket
Reverse Audio (30C). 16mm body size (mini type) Snap-In pot with mounting bracket. D-Shaft ¼", ½" length shaft. 7mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.40
R-VSN-XA-DS Potentiometer - Audio, D Shaft, 16mm, Snap-In, Bracket
Audio. 16mm body size (mini type) Snap-In pot with mounting bracket. D-Shaft ¼", ½" length shaft. 7mm bushing, ¼" bushing length. PC Mount. Nut and washer included
$1.40
R-VPV-XL-B Potentiometer - Peavey, Linear, Mini, Bracket
Linear snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.
$12.50
R-VPV-1MA-B Potentiometer - Peavey, Audio, Mini, Bracket, 1 MΩ
Audio snap-in style pot with bracket, PC mount, 17 mm body diameter, 7 mm bushing diameter (M7 x 0.75), 5 mm split knurled shaft. Mounting hardware not included.
$12.50
P-ST8-807-PC Socket - 8 Pin Octal, ⅞" Fits in 1" Hole with Bracket PC Mount
Ceramic Tube socket used for octal power tubes, PC mount
  • Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/8”, Bottom: 1-1/4”)
  • Mounting Centers: 1-1/2” with oblong mounting holes
  • PC mount pins
$2.50
P-ST8-2000 Socket Saver - 8-Pin with bracket, for reducing wear and tear
8 pin socket saver with bracket. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$11.95
P-GKLU-KLP1731C Pickguard bracket - Les Paul, Brass Chrome
This pickguard mounting bracket is a direct replacement for contemporary Gibson® Les Paul® guitars. It is USA made component with high quality plating to the standards you would expect for your guitar. Slight differences include the adjustment slot having rounded ends instead of the original square cut slot and a slight difference in width from the historic version. Mounting hardware is not included.
$5.40
R-VPV-100KX2-RA Potentiometer - Peavey, 100kΩ, Dual, Bracket
100K Dual Reverse Audio with bracket.
$8.50
P-SS9-400 Tube Shield - High Quality, Fits P-ST9-700 with Spring
New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.
$1.95
P-HW01X Caster - Swivel, 2" wheel, Fender Replacement
Heavy duty swivel caster for use on Fender and other amps. Each 2" diameter wheel supports 45.359Kg / 100Lb.
Starting at $2.70
R-VSHL-BX Potentiometer - Song Huei, Linear, 9mm, Tall
Linear taper, vertical mount, Song Huei pots with a 6mm shaft. These 9mm pots are popular in DIY guitar pedals, modular synthesizers, and other projects where space is limited. The knurled shaft features a painted indicator line so no knob is required. These tall versions have a 17mm shaft length and a total height of 25mm. For audio taper versions, see R-VSHL-AX. For center notched linear taper versions, see R-VSHL-BX-CN.
$0.95
R-VSN-XA-SS Potentiometer - Audio, Solid Shaft, Snap-In, 16mm
Audio. 16mm body size (mini type) Snap-In pot with mounting bracket. Solid Shaft ¼", ⅜" length shaft. 8mm bushing, ¼" bushing length. PC Mount. Nut and washer included.
$1.40
W-QP-518MA-BM 3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, Snap-In, PCM
3.5mm TS jacks with a switched tip found in many DIY Eurorack projects. The WQP-WQP518MA-BM is the new improved version of the WQP-PJ301BM featuring Qingpu’s rugged square based bushing. The sleeve connection is through the outer bracket that snaps into place on the pcb allowing for easy construction and panel fitting. Hardware sold separately. See accessory items below.
$0.50
P-H282A-X Handle Mount - for slotted Strap Handles
Colors Available:
Tweed style hand mounting bracket hardware for P-H262, P-H263, P-H315, and P-H282 amp handles. Sold individually. Screws not included. Multiple color options available.
$1.49
P-HTOG-GORVA-S1 Switch - GØRVA, Submini Toggle, SPDT, 2 Position, PC Pins, Medium Bat
Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
  • 5.59mm non-threaded bushing
  • 2-Position On/On
  • 4.95mm panel hole diameter
  • Single pole/Double throw (SPDT)
  • PC Pins

Features
  • Power Rating: DC9V, 1A
  • Contact Resistance: <20mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 30,000 Cycles
  • RoHS & Lead-free
$1.35
P-ST9-700-PC Socket - Belton, 9 Pin, Crimped with Shield Base, PC mount
Belton 9-pin tube socket, crimped with shield base. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Top mount, PC pins
  • 3/4” tail diameter
  • 1-1/8” mounting centers

Features:
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with collar attached socket
$2.95