Amplifier Parts

P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
$9.00
P-H1050 Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
$1.25
S-HMR-XS Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
P-L119 Jewel - Fender®, for lamps / bulbs, Aqua
Genuine Fender aqua jewel.
$7.50
P-H1086N Corner - Steel, 3-Hole, 20 Gauge
11mm / 7/16" Radius, 20 Gauge Steel (Sold individually)
$0.90
P-L_ALL Jewel - Fender Style, Set of 8
Package of 8
    $23.60
    S-H100 Screw - 1", Flat top Phillips, Stainless Steel
    Package of 4
    1" stainless steel Phillips head, flat top screw.
    $1.40
    S-H101 Screw - #6 x ¾", Pan Head, Stainless Steel
    Package of 12
    Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
    $2.40
    S-H102 Screw - #6 x ¾", Flat Head, Stainless Steel
    Package of 8
    Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
    $2.00
    S-HMR-XG Rivets - Marshall, Gold, for fastening
    Gold rivets for fastening amplifier corners. For use on all Marshalls.
    Starting at $8.95
    P-L124-P Dial Lamp - Fender Style, Premium Pilot Assembly
    Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
    • 11/16" chassis hole
    • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
    • Rating: 125V, 75W
    • Threading: 9/16 - 24

    Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
    $3.85
    P-LJEWEL-KIT Indicator Lamp Jewel Kit - 8 colors, 5 of each, 40 total pieces
    Package of 40
    40 piece kit of indicator lamp jewels. Contains five of each color:
    • Red
    • Purple
    • Green
    • Violet
    • Amber
    • Clear
    • Blue
    • White
    $85.95
    P-L110 Dial Lamp - Front Panel Indicator Light, Relampable
    Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
    • 11/16" chassis hole
    • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
    • Rating: 125V, 75W
    • Threading: 9/16 - 24

    Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
    $3.95
    P-L1XX Jewel - Fender Style, for lamps / bulbs
    Colors Available:
    Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. Threading: 9/16 - 24. Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.
    $2.95
    P-H1080N Corner - Steel, 3-Hole, 18 Gauge
    Industry standard 3-leg back side corner cover for vinyl or carpet covered cabinets. 18 gauge steel, 1/2" radius. Sold individually. See S-H101 for mounting hardware.
    $0.85
    P-H1082N Corner - Steel, 2-Hole, 18 Gauge, Nickel
    Use where total material thickness is 1/2" or more. Works on carpet or vinyl, 18 gauge steel, 1/2" radius. Radius is.50" from the center hole to furthermost edge. Sold individually. See S-H101 for mounting hardware.
    $0.90
    P-H1084N Corner - Steel, 2-Hole, 18 Gauge, ¾" Thickness
    Steel, 2-Hole corner. Replacement for Fender® Corner wraps around inside edge of cabinet. See S-H101 for mounting hardware.
    • Works on ¾" of wood + material thickness
    • 18 gauge steel
    • ½" radius
    • For Fender®
    • Sold individually.
    $0.90
    P-H1087N Corner - 2-Hole, 20 Gauge
    Corner wraps around inside edge of cabinet. Works on 3/4" of wood + material thickness. Countersunk mount holes, 20 gauge, 1/2" radius. Sold individually. See S-H102 for mounting hardware.
    $0.95
    P-H1090 Corner - Marshall, Black Plastic, 4-Hole, Rear, with rivets
    Package of 4
    Marshall back corners with gold rivets. ¾" radius.
    $6.95
    On Backorder
    P-H1091 Corner - Marshall, Black Plastic, 3-Hole, with rivets
    Package of 4
    Front corner set, 3/4" radius. Includes gold rivets. Sold in package of 4
    $6.75
    On Backorder
    P-H1095 Corner - Peavey, Black Steel, 2-Hole, Lip
    Black metal, 2 hole with lip, radius ½". Sold individually.
    $1.50
    P-H1097 Corner - Black steel, 2-Hole, 18 Gauge, Notched
    2-leg notched, black, wraparound. 18 gauge steel, ½" radius. Sold individually.
    $1.10
    P-H1098 Corner - Black Steel, 2-Hole, 18 Gauge, Wraparound, Lip
    2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.
    $1.10
    P-H1099 Corner - Black Steel, 3-Hole, 18 Gauge
    3-leg black, standard. 18 gauge steel, ½" radius. Sold individually.
    $1.10
    Don't see what you're looking for? Send us your product suggestions!