Amplifier Parts

S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10
Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
P-L119 Jewel - Fender®, for lamps / bulbs, Aqua
Genuine Fender aqua jewel.
$7.50
P-L_ALL Jewel - Fender Style, Set of 8
Package of 8
    $23.60
    P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
    Package of 10
    Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
    $1.00
    S-HWX Washer - Type A Narrow, Flat, steel
    Package of 5
    Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.
    Starting at $0.45
    P-H342-X Chassis Strap - generic, for mounting amplifier
    Generic amplifier chassis straps. Mounting hardware sold separately. Sold individually.
    Starting at $1.95
    S-HLWX Washer - Internal Tooth Lock, spring steel
    Package of 5
    Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
    Starting at $0.45
    P-L124-P Dial Lamp - Fender Style, Premium Pilot Assembly
    Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
    • 11/16" chassis hole
    • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
    • Rating: 125V, 75W
    • Threading: 9/16 - 24

    Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
    $3.85
    P-LJEWEL-KIT Indicator Lamp Jewel Kit - 8 colors, 5 of each, 40 total pieces
    Package of 40
    40 piece kit of indicator lamp jewels. Contains five of each color:
    • Red
    • Purple
    • Green
    • Violet
    • Amber
    • Clear
    • Blue
    • White
    $85.95
    P-L110 Dial Lamp - Front Panel Indicator Light, Relampable
    Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
    • 11/16" chassis hole
    • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
    • Rating: 125V, 75W
    • Threading: 9/16 - 24

    Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
    $3.95
    P-L1XX Jewel - Fender Style, for lamps / bulbs
    Colors Available:
    Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. Threading: 9/16 - 24. Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.
    $2.95
    P-H264 Screw - #8-32 x 3.25", for Chassis Straps
    #8-32 x 3 ¼" chassis strap screw. Single piece.
    $2.00
    P-H264X Chassis Strap - Fender, vintage amplifier
    Package of 2
    Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.
    Starting at $8.75
    Don't see what you're looking for? Send us your product suggestions!