Amplifier Parts

S-H205-INSL Insulation Cover - Fuse Holder, 15.5 x 36.8mm, PVC
High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features
  • Provides insulation against shock on rear of fuse holder
  • PVC
  • UL94V-0 rated flame retardant material

Fits S-H205
$2.19
P-L1XX Jewel - Fender Style, for lamps / bulbs
Colors Available:
New!:
Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. Threading: 9/16 - 24. Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.
Starting at $2.95
P-H1050 Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
$1.25
S-H212 Fuse Holder Cap - 3AG, Slotted, for Marshall 2000 Series
Fuse holder cap for the fuse holder found on the Marshall® JCM2000 series such as the TSL100, TSL122, DSL50, and DSL100 as well as other amps. This cap fits 3AG fuses and pairs with S-H211.
$3.95
S-H210 Fuse Holder - 3AG-Type, Tweed Style, Solder Lug
Panel mount 3AG fuse holder with solder lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
$3.55
On Backorder
S-H215 Fuse Holder - Clip, GMA-Type, PCB Mount
Through-hole PCB mounted fuse holder clips found in Peavey amps and other electronics. These small clips allow for minimal space fuse mourning directly on PCB’s. Fits GMA 5×20mm fuses. A pair is required to mount a fuse. Sold individually.
$0.20
On Backorder
S-H217 Fuse Block - For GMA / GMD Fuses, Low Profile
Open frame fuse block for GMA or GMD 5×20mm size fuses with a low profile design that features solder terminals made of tin plated brass. A unique design feature provides self-alignment of the clips to the fuse caps. This feature, plus a one-piece clip/terminal design, assures low contact resistance.
$3.55
S-H213 Fuse Holder - for Marshall, GMA or GMD Type, PCB Mount
Though-hole PCB mount fuse holder used on many Marshall amps such as the 900 series and some 2000 series amps. The fuse cap is sold separately as S-H204. Fits GMA and GMD 5×20mm fuses.
$3.50
S-H221 Fuse Holder - GMA or GMD Type, Low Profile, Slotted, Spade Lug
Panel mount GMA or GMD (5x20mm) fuse holder with spade lug connectors. This fuse holder features a low profile slotted cap and reduced overall height. It is a similar style to fuse holders used on many Marshall amps. Mounting nut included.
$3.95
S-H220 Fuse Holder - 3AG-Type, Low Profile, Slotted, Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile slotted cap and reduced overall height. It is a similar style to fuse holders used on many vintage Marshall amps. Mounting nut and rubber washer included.
$3.25
S-H218 Fuse Holder - 3AG-Type, Tweed Style, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.
$5.95
S-H219 Fuse Holder - 3AG-Type, Low Profile, Knob, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.
$5.95
P-H248-P Screw - 8-32, #12 Reverse Thread, Speaker Baffle Mount
Package of 4
High-quality 8/32 machine screws with #12 reverse wood screw threading at the head. These screws are a simple solution for mounting speakers to baffle boards and were commonly used on many vintage amplifiers. Nuts sold separately.
$0.45
F-ZGMD-S Fuse - Slow-Blow, 250V, Miniature, GMD-type 5mm x 20mm
Package of 5
Protect your expensive investment or hobby with inexpensive fuses. Time-delay, low breaking capacity. Rated at 250V. Package of 5
$3.50
P-L300X LED - 3mm diameter, diffused lens, 3.6 mCd
Package of 5
Colors Available:
New!:
Lens Diameter: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.
$0.70
P-L35X LED - 5mm diameter, diffused lens, 5 mCd
Package of 5
Colors Available:
New!:
5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.
  • 5mm size
  • Tinted and diffused
  • Multiple colors available
  • Package of 5
$0.70
P-L710-X LED Lens - Fresnel, Polycarbonate, 5mm
Colors Available:
Panel mount led lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • ¼” mounting hole
  • For panel thicknesses of 1/16” to ⅛”
  • Fresnel lens
  • Low Profile
Starting at $0.59
P-H296 Handle - Marshall, Black Plastic, Recessed for Cabinet
Recessed plastic side handle for cabinets. Outer Dimensions: 6.19" x 10.63". Molded with a 1.75" Marshall logo.
$24.95
S-H104 Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
Package of 25
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$4.00
P-L119 Jewel - Fender®, for lamps / bulbs, Aqua
Genuine Fender aqua jewel.
$7.95
P-H210 Vent - Marshall, for top, metal construction
Genuine Marshall™ top metal vent. 16 7/8" x 2 ¼".
$25.95
On Backorder
P-HC-7 Amp Cover - For Marshall Straight 4x12 Cab
Vintage style using only the finest tolex available.
  • Height: 29"
  • Width: 30"
  • Depth: 14"
$45.95
P-H261-SET Handle - Black strap, Silver Caps and mounting hardware
P-H261 with mounting hardware Includes:
  • (1) P-H261
  • (1) S-HS1032-1F
  • (1) S-HTN1032
$5.90
P-55 Dial Lamp - #55, G-4-½, 7.0V, .41A, Bayonet Base
Package of 10
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10. Replacement for Fender ®.
$3.00
Don't see what you're looking for? Send us your product suggestions!