Amplifier Parts

Replacement handle for Fender® and other amps (8.25" from mounting center to mounter center).

Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. In multiple colors, you can customize as you see fit. Threading: 9/16 - 24 Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.

Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length.

Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.

• 11/16" chassis hole
• Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
• Rating: 125V, 75W
• Threading: 9/16 - 24

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123

For Fender and other cases. 4 1/2" center to center. Multiple color options available.Mounting screws and rivets not included.

Original Marshall™ JCM 900 Lead-1960 plate

• Fits JCM900 1960A and 1960B Cabinets
• Black on gold
• 29 x 85mm
• Adhesive backing

Not for resale. For repair or replacement only.

Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)

Clip for square Marshall indicator lights

Top plastic vent for Marshall AVT50 and others, 10 5/6" x 1 9/16".

Original Marshall™ 1960 Vintage plate

• Fits 1960AV and 1960BV cabinets
• Black on gold
• 29 x 85mm
• Adhesive backing

Not for resale. For repair or replacement only.

Indicator light, square. 6 Volts. Measures: 0.44" Length x 0.44" Width x 0.27" Depth

Genuine Marshall™ large plastic vent.
Measures 17 5/8" in length and 3" in width.

Front corner set, 3/4" radius. Includes gold rivets. Sold in package of 4

Marshall back corners with gold rivets. ¾" radius.

Original Marshall™ 1960 Classic plate

• Fits 1960AC and 1960BC cabinets
• Black on gold
• 29 x 85mm
• Adhesive backing

Not for resale. For repair or replacement only.

Retro fit for Fender, Molded dogbone style. 6" center to center. Replacement for Fender: 099-0946-000.
For handle mounting hardware, see part number S-H105.

Gold rivets for fastening amplifier corners. For use on all Marshalls.

Silver rivets for fastening amplifier corners. For use on all Marshalls.

Replacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)

High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".

Original Marshall™ '100' logo.

• Fits 1960HW cab
• Gold lettering on white plastic.

This logo is the 3-pin version:

• Center to center pin spacing between the first two digits = 15/16''
• Center to center pin spacing between the second two digits = 1''

Not for resale. For repair or replacement only.

Original Marshall™ Sprung feet. Screws are included.

Vintage strap. Large, black with black caps. Includes:

• 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
• 2 × Mounting brackets
• 2 × Black "Marshall" bracket covers
• 1 × Rubber handle with metallic insert

Original Marshall black plastic top insert (caster cups). Used on 1960B and other cabinets. Package of 4 includes 16 gold rivets.