Amplifier Parts
Fender
Fender® - Founded in Fullerton California by Leo Fender, Fender Musical Instruments Corp is the world's foremost manufacturer of guitars, basses, amplifiers and related equipment dating back to the 1940's.
Tilt Back Leg Kit - Fender, for tilting amps
If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender® has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt you amp back so you can hear what you're doing!
- BF Bandmaster, BF Twin Reverb, SF Bantam Bass, SF Pro Reverb, SF Vibrosonic Reverb, Blonde Bandmaster, BlondeTwin
- Comes with mounting hardware
Starting at $40.95
package of 2
Capacitor Cover - Fender®, for Bassman
Capacitor cover for Fender® Bassman. Mounting center are 5" x 3". Measurements are 5" x 3" x 1 ½".
$36.75
Piggyback Hardware - Fender, Clip Bars
Pure Vintage Piggyback Clip Bars
- Set of two chrome-plated clip bars used to mount "piggyback"-style amplifier heads to amplifier cabinets
- Includes all mounting hardware, including tee nuts, ribbon springs and mounting screws
- Introduced on Blonde and Blackface™ era amplifiers
- Used on Tone-Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
$34.95
package of 2
Capacitor Cover - Fender®, for Reissue Vibroverb
Capacitor cover for Fender ® Reissue Vibroverb. Mounting centers are 5.75" x 3". Measurements are 6.25" x 3.5" x 1.42"
$27.95
Amp Cover - Fender, For Blues Jr., Brown
Protect your investment with a fitted Genuine Fender amplifier cover. Designed to fit your Blues Jr. and Blues Jr III perfectly.
- Blank brown nylon cover
- Designed to fit Blues Junior™ and Blues Junior™ III amplifiers (1996-present)
- Height: 16" (40.64 cm)
- Width: 18" (45.72 cm)
- Depth: 9.18" (23.31 cm)
$22.95
Amp Cover - Fender®, for 65 Deluxe Reverb
Black polyester cover or '65 Deluxe Reverb, black. Designed to fit '65 Deluxe Reverb® Reissue (1993-present) and Super-Sonic™ 22 Combo (2010-present) amplifiers
$20.95
Amp Cover - Fender®, for Super Reverb
For 1993 Super, 2001 Super Reverb (fits all). Fits the 2001 reissues and the original 60s amps. It might not fit on all the 70s versions. Dimensions: Height: 24" Width: 25" Depth: 9" top, 10 ½" bottom
$20.95
Amp Cover - Fender®, for '59 Bassman
For '59 Bassman, Blues Deville 410 (fits all), brown. Dimensions: Height: 22" Width: 23 ½" Depth: 10" top, 11" bottom
$20.95
Capacitor Cover - Fender®, for Twin Reverb
Capacitor cover for Fender® Twin Reverb. Mounting centers are 7 1/8" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".
$20.95
Logo - Fender, plate, for Tweed amplifier
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
Fender part number: 099-409-6000
- Genuine Fender® tweed amp logo
- Mounting pins included
- Designed for
- Pro Junior™
- Blues Junior™
- JazzMaster™ Ultralight
- plus others
Fender part number: 099-409-6000
$19.95
Amp Cover - Fender®, for 65 Twin Reverb Reissue
Black polyester amplifier cover for '65 Twin Reverb Reissue, black. Designed to fit '65 Twin Reverb® Reissue amplifiers (1992-present)
$19.95
Piggyback Hardware - Fender, Bushings
Pure Vintage Piggyback Bushings
- Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
- Internally threaded to accept piggyback thumbscrews (sold separately)
- Introduced on Blonde and Blackface™-era amplifiers
- Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
$16.95
package of 2
Logo - Fender, Blackface, silver on black
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
- Genuine Fender Blackface amplifier logo
- Mounting screws included
- Designed for Super-Sonic™ series, ’94 Twin-Amp™, Pro Reverb™, Prosonic™, Concert Reverb™, ’65 Twin Reverb®, ’65 Deluxe Reverb®, ’65 Super Reverb®, Machete™, ’65 Princeton® Reverb, ’64 Vibroverb™, ’68 Custom Princeton, ’68 Custom Twin Reverb, ’68 Custom Deluxe Reverb, Steel King, Jazz-King™, Cyber Twin®, VM series, Princeton Recording Amp, Bassman® Pro series, Stage™ 1000, Deluxe™ 900 and Princeton 650 amplifiers plus others.
$16.50
Logo - Fender, Flat, silver with accent color
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
Measurements:
Accent Colors Available:
- Genuine Fender® flat black amplifier logo
- Mounting screws included
- Designed for Bassman® series, Super-Sonic™ series and Vibro-King® series amplifiers plus others
Measurements:
- Bottom Horizontal Mounting Holes Center-To-Center : 4.14” (150.1mm)
- Top Horizontal Mounting Holes Center-To-Center : 3.18” (81.9mm)
- Vertical Mounting Holes On “F” Center-To-Center : 1.98” (50.4mm)
- Vertical Mounting Holes On “R” Center-To-Center : .98” (24.9mm)
$16.50
Handle - Fender, Black Plastic, Silver Caps, 2 screws per cap
Pure Vintage Amplifier Handle (2-screw mount)
- Black amplifier handle with vinyl sleeve over steel strap and two-screw end caps
- Includes mounting hardware (four screws and T-nuts)
- Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers
- 8" center to center. 9 ¼" handle length without end caps.
$12.45
Tube Stabilizer - Fender®, Hot Rod Series
Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
$11.95
Handle - Fender®, molded Dogbone style
Original Fender® handle, brown molded dogbone style. 6" center to center. Includes mounting hardware. Fender part number: 099-0946-000
Colors Available:
$11.95
Piggyback Hardware - Fender, Thumb Screws
Thumb screws for piggyback amplifier, used for locking amp heads to cabs. Original Fender.
$11.95
package of 2
Chassis Strap - Fender, vintage amplifier
Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.
$9.95
package of 2
Handle - Fender, Vinyl, Silver Caps, 1 screw per cap
Pure Vintage Amplifier Handle (1-screw mount). Vintage style amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps. Includes mounting hardware (two screws and T-nuts)
Colors Available:
Starting at $9.45
Foot - Fender, vintage Sphinx Glides
Keep your amplifier protected and looking great by replacing missing or damaged feet with new genuine Fender nickel-plated "Sphinx Glide" amplifier feet. Metal amplifier cabinet glide feet with rubber bushings and mounting screws. Fender part number: 099-3900-000
$8.95
package of 4
Corners - Fender, for amplifier, Steel, 3-Hole with hardware
Pure Vintage 3-screw mount amplifier corners
- Set of four nickel-plated replacement amplifier corners for effective amplifier protection
- Includes 12 mounting screws
- Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin® amplifiers
$8.45
package of 4
Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Pure Vintage 2-screw mount amplifier, package of 4, screws included.
- Set of four nickel-plated replacement amplifier corners for effective amplifier protection
- Includes eight mounting screws
- Introduced on Blonde, Brown, and Blackface™-era amplifiers
- Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
$8.45
package of 4
Screws - Fender, 10-32x1.5", Phillips Head, Vintage Amp
Made for Fender® and used on a variety of vintage and contemporary models. Package contains twelve Phillips head (10-32 X 1-½") nickel machine screws used for mounting an amplifier chassis. Used on '57 Twin®, Blues Deluxe™/DeVille™, Pro Junior™, Hot Rod Deluxe™/DeVille™, Blues Junior™, '59 Bassman®, '63 Fender® Tube Reverb, Bronco™, Bass Breaker™, '57 Deluxe™, Bassman® TV Series, EC Twinolux™/Tremolux™, '57 Champ®, EC Vibro-Champ™, and '57 Bandmaster™ amplifiers manufactured from 1994-Present.
$5.85
package of 12