Amplifier Parts

Marshall

Marshall guitar amplifiers are among the most recognized in the world. They are known for their Marshall "crunch".

Ampeg

Ampeg, founded in 1946 by Everett Hull and Stanley Michaels, is a manufacturer best known for its bass amplifiers.
P-HCM-201 Amp Cover - Marshall, for Most Full Size Marshall Heads
Fits most full-size heads. Does not fit DSL100H. 30" x 11" x 9".
$34.95
P-HCM-202 Amp Cover - Marshall, for Slant 4x12 Cabs (Not 1960TV)
Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"
$54.95
P-HCM-203 Amp Cover - Marshall, for Straight 4x12 Cabs
Fits straight 4 X 12 cabinets.
Vinyl Cover for Marshall 1960B Straight-front Cabinet, with Piping and Marshall Logo
$54.95
P-HW06 Anti-Skid Tray - Marshall, for 1960A and Other Cabinets
Original Marshall black plastic skid. Inscribed with "Marshall" logo. Used on 1960A and other cabinets. Package of one includes 6 gold rivets.
$11.50
On Backorder
P-HW05 Caster - Marshall, 2", with socket, for cabinets
Original Marshall caster and socket with a black wheel having 50mm diameter x 20mm width. Used on 1960A, 1960B and other cabinets. Package of one includes four mounting screws. Caster screws into black plastic socket base.
$17.95
P-HW04 Caster Cups - Marshall, for 1960B and Other Cabinets, set of 4
Package of 4
Original Marshall black plastic top insert (caster cups). Used on 1960B and other cabinets. Package of 4 includes 16 gold rivets.
$11.00
P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
$9.00
On Backorder
P-H1091 Corner - Marshall, Black Plastic, 3-Hole, with rivets
Package of 4
Front corner set, 3/4" radius. Includes gold rivets. Sold in package of 4
$6.75
P-H1090 Corner - Marshall, Black Plastic, 4-Hole, Rear, with rivets
Package of 4
Marshall back corners with gold rivets. ¾" radius.
$6.95
On Backorder
S-M652 Faceplate - Marshall, 1960 Classic plate
Original Marshall™ 1960 Classic plate
  • Fits 1960AC and 1960BC cabinets
  • Black on gold
  • 29 x 85mm
  • Adhesive backing

Not for resale. For repair or replacement only.
$7.50
S-M651 Faceplate - Marshall, 1960 Vintage plate
Original Marshall™ 1960 Vintage plate
  • Fits 1960AV and 1960BV cabinets
  • Black on gold
  • 29 x 85mm
  • Adhesive backing

Not for resale. For repair or replacement only.
$5.50
P-H252 Foot - Marshall, Sprung Amplifier Head
Package of 2
Original Marshall™ Sprung feet. Screws are included.
$10.75
S-H204 Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length.
$3.50
P-H322 Handle - Marshall, Black Metal, for 1960HW
Black, steel side handle for Marshall 1960AHW and 1960BHW (hand wired) cabinets.
$18.85
P-H296 Handle - Marshall, Black Plastic, Recessed for Cabinet
Recessed plastic side handle for cabinets. Outer Dimensions: 6.19" x 10.63". Molded with a 1.75" Marshall logo.
$24.95
P-H294 Handle - Marshall, Black Vintage, Black Caps, Large, Strap
Vintage strap. Large, black with black caps. Includes:
  • 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
  • 2 × Mounting brackets
  • 2 × Black "Marshall" bracket covers
  • 1 × Rubber handle with metallic insert
$10.76
P-H300 Handle Latch - Ampeg, Suitcase Flip Top
Replacement latch for Ampeg Flip Top. For use with P-H300-TOP.
All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.
$4.55
P-L007 Indicator Light - Marshall, Purple Square, LED
Genuine Marshall purple indicator light used in older models such as the Vintage Modern 2266 and 2266C.
$5.50
On Backorder
P-L14-120 Indicator Light - Marshall, Red Square, 120V
Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)
$4.85
P-L14-6 Indicator Light - Marshall, Red Square, 6V
Indicator light, square. 6 Volts. Measures: 0.44" Length x 0.44" Width x 0.27" Depth
$5.90
On Backorder
P-L14-6-CLIP Indicator Light Clip - Marshall, for securing lights
Clip for square Marshall indicator lights
$4.95
S-M921 Logo - Ampeg, "A" symbol, plastic, 3.17" wide
Ampeg plastic "a" logo (mounting centers: 2 1/4" x 2 3/8")
$2.00
S-M919 Logo - Ampeg, Script, silver metal for amps
Genuine Ampeg™ Script Logo
$17.95
On Backorder
S-M603 Logo - Marshall, Gold Script on white plastic, 6"
Original Marshall™ mini logo.
  • Fits 1959HW, Bluesbreaker model 1962 and others.
  • Gold lettering on white plastic
  • 6” (40 x 150 mm)

Not for resale. For repair or replacement only.
$19.95
A maximum order of 2 is allowed.
Don't see what you're looking for? Send us your product suggestions!