Amplifier Parts

New-old-stock Soviet pilot lights that operate on 9V. These lights have a unique bakelite frame and metal bezel. The lights come with a 9V bulb but can be used with any voltage bulb that fits this type of socket. The diameter of the light is 12mm and the diameter of the mounting hole is 8.1mm. Includes a wavy washer and knurled nut. Note: There can be small differences in the appearance and tint of the lens and color of the bakelite. A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel. The small bulbs can come loose during shipping and reseating the bulb is recommended before use.

Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.

Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes). Suitable for 1/4" fuses. UL and CSA approved. Electrical Specifications:

• Rated current: 10A
• Rated voltage: 250V AC
• Contact resistance: 2MΩ @ 250V DC or less
• Dialectric withstand: 1 minute @ 1500V AC
• Insulation resistance: 100MΩ or more @ 500V DC

Two rows of 30 U-style terminals (60 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

~1" (25mm) diameter x 1" (25.4mm) high rubber foot / recessed bumper with a steel insert. The 0.217” (5.5mm) mounting hole works well with a variety of screw sizes. Screws sold separately.

High quality bifurcated (slotted) turrets with a hollow post. These terminals are made of annealed brass with a 100% tin over nickel plating. These slotted turrets closely resemble those found in vintage Marshall amps.

• Triple turret with slot
• 9.12mm height when installed
• 3.18mm diameter
• For 3.0mm to 3.2mm panel thickness
• Recommended for mounting holes sized 2.68mm to 2.78mm
• Bright 100% tin finish
• Knurled underside of shoulder to prevent rotation once swaged

Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.

Original Marshall™ cabinet logo frame. This mounts to original Marshall™ cabinets using two screws. The adhesive backed badge is then adhered to this frame.

• Fits 1960 cabinets
• Black plastic
• For 29 x 85mm logos
• Screw mount

Note: Faceplates sold separately.
Faceplates sold separately.

Blank board, 10-1/8" x 2-5/8", 189 3mm holes on 3/8" centers.

• Blue, Green, Yellow: 2 mm board thickness
• Black, Red: 3 mm board thickness

For vintage style phenolic boards, see P-HTUR-189-BRN and P-HTUR-216-BRN.

Genuine Marshall front corner set. These corners feature 3/4" radius and three mounting holes. These corners can be used on both straight and slanted cabinets. Includes gold mounting rivets. Sold in package of four corners.
For similar generic front corners, see P-H3081.

Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately. Multiple sizes available.

Though-hole PCB mount fuse holder used on many Marshall® JCM2000 series such as the TSL100, TSL122, DSL50, and DSL100 as well as other amps. Check footprint and dimensions for compatibility. This holder fits 3AG fuses and pairs with the S-H212 cap. Cap sold separately.

Marshall back corners with gold rivets. 3/4" radius.
For similar generic back corners, see P-H3080.

Genuine Marshall™ large plastic vent. Measures 17 5/8" in length and 3" in width.

Power Cord / cable - (3 conductor) Bare End, 16 AWG

P-H261 with mounting hardware Includes:

• (1) P-H261
• (1) S-HS1032-1F
• (1) S-HTN1032

Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 216 hole version has 8 rows and 27 columns. This size can be found in vintage Marshall amps such as various revisions of the JTM45 and 50W JMP amps.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.

Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 189 hole version has 7 rows and 27 columns. This size can be found in vintage Marshall amps such as the 1973 and 1974 18W amps, 20W amps such as the 2022T JMP Tremolo 20, 2061 Lead-Bass, PA20, and the 10W 1930 Popular.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.

Retro fit for Fender, Molded dogbone style. 6" center to center. Replacement for Fender: 099-0946-000. For handle mounting hardware, see part number S-H105.

Snubber parts kit for circuits. Used to build a "snubber circuit" to remove unwanted high frequencies and high voltages resulting from output transformer ringing in a guitar amplifier, without the "brick wall" effect of using diodes.

Recessed black metal handle for installation in cabinets

VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.

Pure Vintage 2-screw mount amplifier, package of 4, screws included.

• Set of four nickel-plated replacement amplifier corners for effective amplifier protection
• Includes eight mounting screws
• Introduced on Blonde, Brown, and Blackface™-era amplifiers
• Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers

Pure Vintage 3-screw mount amplifier corners

• Set of four nickel-plated replacement amplifier corners for effective amplifier protection
• Includes 12 mounting screws
• Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin® amplifiers