Amplifier Parts
#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.
$1.89
package of 4
18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.
$1.89
package of 5
#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.
$1.89
package of 4
I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
$1.85
#3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.
$1.79
package of 5
#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.
$1.79
package of 5
#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$1.75
package of 4
Listed diameter is inside diameter. Sold in packs of 5.
- 3/8" diameter designed for chassis hole with diameter 1/2"
- 1/8" diameter designed for chassis hole with diameter 1/4"
- 3/16" diameter designed for chassis hole with diameter 5/16"
- 1/4", small cutout diameter designed for chassis hole with diameter 3/8"
- 1/4" diameter designed for chassis hole with diameter 7/16"
- 5/16" diameter designed for chassis hole with diameter 7/16"
Starting at $1.75
package of 5
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.70
package of 10
2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.
$1.65
2-leg notched, black, wraparound. 18 gauge steel, ½" radius. Sold individually.
$1.65
High quality chrome glides with a 1 inch diameter and 0.36 inch height. The mounting hole diameter is 0.16 inches. These glides are a close match to the original Sphinx glides used on 60s Fender® amps. Sold individually.
$1.60
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.
$1.59
package of 5
4-40 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 4-40 size works in place of original M3 screws that were used for the AC inlet, noval sockets, PCB and turret board standoffs, and the P-H1700 and S-HM100-A rotary selectors. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. Use with S-ASP4-X spacers for board standoffs. S-HBWX flat washers are also available.
Starting at $1.59
package of 5
18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.
$1.59
package of 5
Gold cap for vintage handle as used on Marshall JCM800 and others. Sold individually. Fits handle P-H295 and inner clamp P-H295-CMP.
$1.55
Long life general replacement lamps for dials, indicators, etc. Sold individually.
$1.50
1 ½" diameter x 1 3/16" high with metal washer. Sold individually.
$1.50
Black metal, 2 hole with lip, radius ½". Sold individually.
$1.50
Colors Available:
$1.49
Stainless steel M6 flat washers that are nearly identical to the chassis mounting washers used on many Marshall amps. These oversized M6 washers pair with 30mm M6 screws S-HSM6-1X30-SS to attach the amplifier chassis to the head cabinet. Fits any Marshall head that uses M6 screws. Also fits #12 imperial screws.
$1.49
package of 5
1" stainless steel Phillips head, flat top screw.
$1.45
package of 4
Fluted dome style lamp jewels were used on vintage equipment from many manufacturers. This jewel fits the standard P-L124-P pilot light found on most Fender amps as well as the P-L110. Threading: 9/16 - 27
$1.45
#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of oval head screw matches the pickup and switch mounting screws found on Fender® guitars with countersunk holes on the pickguard.
$1.45
package of 5