Amplifier Parts

P-LBL-BUILD-1 Label - display model info, vintage-style sticker
Vintage style model information label. This label has a line for a model name or number, the serial number, builder name or company, and the build date. This sticker is a great way to provide build info with a professional presentation on the chassis of a pedal or amp.
$1.39
P-LBL-BUILD-2 Label - Quality Assurance, Vintage Style Sticker
Vintage style quality assurance label. This label has an electronic test line for the name of a technician responsible for testing the electronics and a sound test line for the name of a technician responsible for testing the functionality of the device. This sticker is a great way to document quality assurance testing with a professional presentation on the chassis of a pedal or amp.
$1.95
P-LBL-BUILD-3 Label - Service Info, Vintage Style Sticker
Vintage style service information label. This label has a line for the name of a tech or service company, contact information, and the date of service. This sticker is a great way to provide service info with a professional presentation on the chassis of a pedal or amp.
$1.95
P-LBL-CHART-1 Label - 4-Band Resistor Color Code Chart
Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.
$2.95
P-LBL-FZ-1 Label - AA Battery Orientation, FZ-1, Vintage Style Sticker
Vintage style AA battery orientation label. This label matches the size and style of those found in original FZ-1 fuzz pedals. It is a great option for replica style builds or other vintage inspired effects.
$2.95
P-LBL-HIGHV-1 Label - Danger High Voltage, Small, Sticker
Danger high voltage label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for smaller areas like circuit boards, components, heatsinks and other areas inside the chassis.
$1.25
package of 4
P-LBL-HIGHV-2 Label - High Voltage Warning, Large, Sticker
High voltage warning label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for rear panels on amplifiers and other equipment.
$1.25
package of 4
P-L_ALL Jewel - Fender Style, Set of 9, for indicator lights
    $29.79
    package of 9
    P-NE51 Dial Lamp - NE51, T-3-¼, 90/110V, .0003A, Bayonet Base
    Long life general replacement lamps for dials, indicators, etc. Sold individually.
    $1.95
    P-SP2-106 Receptacle - IEC C14, for power cord, 3 prong
    Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power cables with ground connections. Internal connections can be soldered into place or used with quick disconnects. See Specifications, Files, and Documents for a datasheet with dimensions and panel cut out sizing.
    $2.15
    P-SP2-500 Receptacle - AC with Fuse Holder, mates with S-W123 & S-W124
    I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
    $1.85
    P-SP2-500-CAP Replacement Fuse Holder Cap - For P-SP2-500
    Fuse holder cap replacement for P-SP2-500 power receptacle.
    $1.00
    P-SP2-600 Receptacle - AC power plug with fuse holder, 10A, 250VAC
    Black plastic AC power entry module with built in fuse holder. This power entry module is rated at 10A, 250VAC and fits 5mm x 20mm fuses. Mates with S-W123 & S-W124
    $1.40
    P-SP2-700 Receptacle - IEC C14, Bulgin, Replacement for Marshall Pignose
    Black nylon AC power entry connector with the same mounting dimensions as the original Bulgin “Pignose” connectors used on early Marshall amps. This connector allows the amp to be fitted with a safer connector with no modifications to the chassis. Mounting hardware not included.
    $4.95
    P-SP2-800 Receptacle - IEC C14, Snap-in Panel Mount
    High quality snap-in IEC C14 power entry connector. The connector is easy to install and is rated for 250VAC at 15A. The quick disconnect terminals can also be directly soldered to. Features:
    • High quality thermoplastic housing
    • Copper alloy terminals (4.8mm width)
    • Quick installation
    • Fits 0.8mm to 2mm thick panels
    $2.29
    P-STABLE Tube Stabilizer - Fender®, Hot Rod Series
    Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
    $11.95
    P-STX-CVR Covers - for Chassis Socket Hole, Steel
    Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
    • 9 pin (noval) socket hole cover
    • 5mm x 3.5mm mounting holes
    • 27.1mm center to center

    P-ST8-CVR
    • 8 pin (octal) socket hole cover
    • 6.5mm x 3.5mm mounting holes
    • 40mm center to center

    P-ST8-ST9-CNVRT
    • 8 pin to 9 pin (octal to noval) socket adapter
    • Bottom mount 9 pin socket recommended
    Starting at $2.50
    P-VENT-MX Vent - Vintage Marshall Style, Metal Mesh, Gold
    Vintage Marshall style vent material. This gold plated metal mesh is sourced from the UK factory used by Marshall. These vents look great on Plexi head cabinet builds such as the JTM45 and 1959 amplifiers. Top Vent Dimensions (P-VENT-MT)
    • 20.75 in. x 2.75 in.

    Back Vent Dimensions (P-VENT-MB)
    • 24 in. x 5 in.
    Starting at $22.95
    R-VOP1020 Switch - Vibrato LDR, for Fender® Amps
    Optocoupler. Vibrato LDR for Fender Amps. Fix the dead LDR-style tremolo on your vintage Fender amps as well as others.
    • Non-polarized optical side is indicated by silver dot and slightly longer leads
    • Resistive side is indicated only by slightly shorter leads
    • This neon lamp optocoupler is commonly referred to as a roach
    $8.95
    R-VTL5C1 Optocoupler - XVive, VTL5C1, Vactrol, for Channel Switching
    VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
    $8.40
    On Backorder
    R-VTL5CX Optocoupler - Xvive, Vactrol, VTL5C Series
    High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
    Starting at $6.50
    S-ASP4-X Spacers - Round, Aluminum, fits 4-40, 3/16” OD
    Round spacers made of aluminum that fit 4-40 or M3 threaded screws. These non-threaded aluminum spacers visually match the PCB and turret board standoffs found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The outer diameter is 3/16”. These will also work well in many other types of projects. Pairs with S-HSB4-114 screws, S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
    $1.19
    S-H100 Screw - 1", Flat top Phillips, Stainless Steel
    1" stainless steel Phillips head, flat top screw.
    $1.45
    package of 4
    S-H101 Screw - #6 x ¾", Pan Head, Stainless Steel
    Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
    $4.35
    package of 12
    Don't see what you're looking for? Send us your product suggestions!