Amplifier Parts

Package of 10. Long life general replacement lamps for dials, indicators, etc.

Long life general replacement lamps for dials, indicators, etc. Very commonly found in RCA radios.

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10. Replacement for Fender ®.

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.

Package of 10.

Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. Threading: 9/16 - 27. Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.

This handle has a flexible molded black grip with two rugged die-cast mounts. There are two holes per mount for use with M4 screws. See specifications below for dimensions.

Black plastic handle with black end caps. Mounting centers adjustable from 8" to 8.75". 9 5/8" handle length without end caps. Screws not included.

Vintage style AA battery orientation label. This label matches the size and style of those found in original FZ-1 fuzz pedals. It is a great option for replica style builds or other vintage inspired effects.

Flush finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flush finishing washers found on earlier blackface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the later flanged style finishing washers used on these amps, see S-HXFW-2N.

Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.

8-32 x ½” Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 8-32 x ½” size works in place of original M4.5 screws that were used for mounting the power and output transformers. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.

Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.

High quality Fender® Style fuse holder replacement for guitar amplifiers.

• Fits ½" chassis hole diameter
• Mounted by Nut

Heavy duty swivel caster for use on Fender and other amps. Each 2" diameter wheel supports 45.359Kg / 100Lb.

Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.

• .062" thick
• 3" x 15"

High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features

• Provides insulation against shock on rear of fuse holder
• PVC
• UL94V-0 rated flame retardant material

Fits S-H205

Steel lock washers that use both internal and external teeth for locking and tension. The teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface and silverface amplifiers for securing speakers to the cabinet. These washers have a zinc finish.

#8 x 1 ¾” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

#6 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on vintage style Fender® Stratocaster® bridges mounted directly to the body using six screws.

High quality fuse holder used with 3AG type fuse. Fits in a 1/2" diameter chassis hole. Frame and cap material: phenolic Terminal material: Nickel-plated brass Mounted by nut

Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR

• 9 pin (noval) socket hole cover
• 5mm x 3.5mm mounting holes
• 27.1mm center to center

P-ST8-CVR

• 8 pin (octal) socket hole cover
• 6.5mm x 3.5mm mounting holes
• 40mm center to center

P-ST8-ST9-CNVRT

• 8 pin to 9 pin (octal to noval) socket adapter
• Bottom mount 9 pin socket recommended

#8-32 x 3 ¼" chassis strap screw. Single piece.

Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.