Amplifier Parts

S-H219 Fuse Holder - 3AG-Type, Low Profile, Knob, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.
$5.95
S-H104 Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
Package of 25
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$4.00
S-H215 Fuse Holder - Clip, GMA-Type, PCB Mount
Through-hole PCB mounted fuse holder clips found in Peavey amps and other electronics. These small clips allow for minimal space fuse mourning directly on PCB’s. Fits GMA 5×20mm fuses. A pair is required to mount a fuse. Sold individually.
$0.20
S-H253 Piggyback Hardware - Fender, Bushings
Package of 2
Pure Vintage Piggyback Bushings
  • Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
  • Internally threaded to accept piggyback thumbscrews (sold separately)
  • Introduced on Blonde and Blackface™-era amplifiers
  • Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
$16.95
P-HC-6 Amp Cover - For Marshall Slant 4x12 Cab, Black
Vintage style using only the finest tolex available.
  • Height: 30"
  • Width: 30"
  • Depth: 14.5"
$45.95
P-H280 Handle - Ampeg Style, Blue Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$15.95
P-41 Dial Lamp - #41, T-3-¼, 2.5V, .50A, Screw Base
Package of 10
Package of 10. Long life general replacement lamps for dials, indicators, etc.
$3.00
P-H287 Handle - Marshall Style, Black Vintage, Gold Caps, Large
Black/gold, vintage Marshall style handle. Gold end caps and inner clamps included. Mounting screws not included
$15.75
S-HSM6-1X30 Screw - M6-1.0 x 30mm, Phillips, Pan Head, Zinc, coarse thread
Package of 5
Phillips pan head machine screw, 1 x 30. Designed to go through a pre-tapped hole or nut to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.75
S-M701 Logo - Vox™, Gold plastic, large size
Original VOX™ large logo.
  • Fits AC30
  • Gold, plastic logo.
  • 34mm height x 107mm length
$22.50
P-HCF-102 Amp Cover - Fender®, for 65 Deluxe Reverb
For '65 Deluxe Reverb, black. Dimensions: Height: 17" Width: 24 ½" Depth: 7 ½" top, 9 ¼" bottom
$19.95
S-H100 Screw - 1", Flat top Phillips, Stainless Steel
Package of 4
1" stainless steel Phillips head, flat top screw.
$1.40
P-45 Dial Lamp - #45, T-3-¼, 3.2V, .35A, Bayonet Base
Package of 10
Package of 10. Long life general replacement lamps for dials, indicators, etc. Sold in package of 10 bulbs.
$3.00
P-HC-5 Amp Cover - For Marshall Full Size Amp Head
Vintage style using only the finest tolex available.
  • Height: 11"
  • Width: 30"
  • Depth: 9"
$29.95
P-HCM-201 Amp Cover - Marshall, for Most Full Size Marshall Heads
Fits most full-size heads. Does not fit DSL100H. 30" x 11" x 9".
$49.95
P-STABLE Tube Stabilizer - Fender®, Hot Rod Series
Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
$9.45
S-H221 Fuse Holder - GMA or GMD Type, Low Profile, Slotted, Spade Lug
Panel mount GMA or GMD (5x20mm) fuse holder with spade lug connectors. This fuse holder features a low profile slotted cap and reduced overall height. It is a similar style to fuse holders used on many Marshall amps. Mounting nut included.
$3.95
S-M652 Faceplate - Marshall, 1960 Classic plate
Original Marshall™ 1960 Classic plate
  • Fits 1960AC and 1960BC cabinets
  • Black on gold
  • 29 x 85mm
  • Adhesive backing

Not for resale. For repair or replacement only.
$7.50
P-53 Dial Lamp - #53, G-3-½, 14.4V, .12A, Bayonet Base
Package of 10
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
$3.00
P-81 Dial Lamp - #81, G-6, 6.5V, 1.02A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold individually.
$1.50
P-HC-11 Amp Cover - Replacement for Fender® Princeton Reverb
Vintage style using only the finest tolex available.
  • Height: 16"
  • Width: 20.5"
  • Depth: 9"
$27.95
P-HCM-202 Amp Cover - Marshall, for Slant 4x12 Cabs (Not 1960TV)
Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"
$69.95
P-HFAN Fan - 115V, AC ~\frac{50}{60}~ Hz, 1 Phase, low noise
Super low noise 115V-AC. Dimensions are 4 11/16" (height) x 4 11/16" (width) x 1 ½" (depth). The distance between mounting centers is 4 1/8" x 4 1/8".
$27.95
P-H712 Capacitor Cover - Fender®, for Bassman
Capacitor cover for Fender® Bassman. Mounting center are 5" x 3". Measurements are 5" x 3" x 1 ½".
$34.95
Don't see what you're looking for? Send us your product suggestions!