Amplifier Parts

Vintage strap. Large, black with black caps. Includes:

• 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
• 2 × Mounting brackets
• 2 × Black "Marshall" bracket covers
• 1 × Rubber handle with metallic insert

Though-hole PCB mount fuse holder used on many Marshall amps such as the 900 series and some 2000 series amps. The fuse cap is sold separately as S-H204. Fits GMA and GMD 5×20mm fuses.

Long life general replacement lamps for dials, indicators, etc.

Retro fit for Fender, Molded dogbone style. 6" center to center. Replacement for Fender: 099-0946-000. For handle mounting hardware, see part number S-H105.

Pure Vintage Piggyback Bushings

• Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
• Internally threaded to accept piggyback thumbscrews (sold separately)
• Introduced on Blonde and Blackface™-era amplifiers
• Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures

High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.

• 3mm size
• Water clear
• High brightness
• Multiple colors available
• Package of 5

PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.

High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".

258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.

Package of 10. Long life general replacement lamps for dials, indicators, etc. Sold in package of 10 bulbs.

Optocoupler. Vibrato LDR for Fender Amps. Fix the dead LDR-style tremolo on your vintage Fender amps as well as others.

• Non-polarized optical side is indicated by silver dot and slightly longer leads
• Resistive side is indicated only by slightly shorter leads
• This neon lamp optocoupler is commonly referred to as a roach

11mm / 7/16" Radius, 20 Gauge Steel (Sold individually)

Leather corners for cabinets similar to those used on Mesa amps. The corners attach to amps with wood tacks (sold separately).

• 2.25” Length
• 1.55” Width

2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.

Vintage style using only the finest tolex available.

• Height: 29"
• Width: 30"
• Depth: 14"

Original Marshall™ mini logo.

• Fits 1959HW, Bluesbreaker model 1962 and others.
• Gold lettering on white plastic
• 6” (40 x 150 mm)

Not for resale. For repair or replacement only.

Genuine Marshall purple indicator light used in older models such as the Vintage Modern 2266 and 2266C.

Brass general purpose flat washers. Designed for general purpose mechanical and structural use. Brass washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive. Pairs nicely with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws and S-HBNX nuts.

Old style inner clamp. Sold individually. Screws not included

Round metal handle with 3.5" mounting centers and 1.5" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features

• Made of round steel
• 2 Screws - Panhead 8-32 x 1/2"
• 2 Internal Tooth Lockwashers

Long life general replacement lamps for dials, indicators, etc. The #47 bulb is the most common replacement light used today. Used on the vast majority of Fender amps and many others as well.

Capacitor cover for Fender® Twin Reverb. Mounting centers are 7 1/8" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".

Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.

0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.