Amplifier Parts
Caster - Small Swivel, 2", 4 Screw Mount
Small swivel caster with a black wheel having 50mm diameter x 21mm width. Four ¼" diameter mounting holes. Mounting hardware not included.
$5.15
Handle - Hammond, steel construction, 1427C1
Special Order Item
Round steel handle with 4" mounting hole center. 1.3" tall. Hardware included.
$5.02
Fuse Holder - Bakelite, Soviet, GMD-type 5mm x 20mm
New-old-stock Soviet fuse holders. These panel mount holders fit 5x20mm GMA and GMD type fuses. A 0.625” mounting hole is required. Note: A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel
$5.00
Receptacle - IEC C14, Bulgin, Replacement for Marshall Pignose
Black nylon AC power entry connector with the same mounting dimensions as the original Bulgin “Pignose” connectors used on early Marshall amps. This connector allows the amp to be fitted with a safer connector with no modifications to the chassis. Mounting hardware not included.
$4.95
Turrets - 0.172" Long, Brass, Premium, Package of 10
Hollow Turret Terminal,Brass, .172" Long, Premium.
- Finish/Plating: Tin
- For Panel Thickness: .125 [3.2]
- Material: Brass
- Mounting Hole: 0.116
- Terminal Length: 0.312
- Terminal Style: Tubular Turret
- Type: Solder Turret Terminal
- Package of 10
$4.95
package of 10
Vent - Marshall, for top, plastic construction
Top plastic vent for Marshall AVT50 and others, 10 5/6" x 1 9/16".
$4.95
Fuse Block - For GMA / GMD Fuses, Low Profile
Open frame fuse block for GMA or GMD 5×20mm size fuses with a low profile design that features solder terminals made of tin plated brass. A unique design feature provides self-alignment of the clips to the fuse caps. This feature, plus a one-piece clip/terminal design, assures low contact resistance.
$4.95
Handle - Pocket, Black, Plastic, Recessed for Cabinet
Black pocket handle for cabinets. These recessed handles are made of a thick and durable plastic. They sit nearly flush to the side of a cabinet for a clean look that still provides a solid grip when carrying the cabinet.
$4.95
Indicator Light Clip - Marshall, for securing lights
Clip for square Marshall indicator lights - used to secure the indicator lights in place
$4.95
Receptacle - IEC C14, Panel Mount, Fuse Holder, 10A, 250VAC
Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power cables with ground connections. Internal connections can be soldered into place or used with quick disconnects. This receptacle features a built-in fuse holder for 5mm x 20mm fuses. See Specifications, Files, and Documents for a datasheet with dimensions and panel cut out sizing.
$4.89
Indicator Light - for Marshall, Red Square, 120V
Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)
$4.85
Handle - Case, Fender style, 4.5" center to center
For Fender and other cases. 4 1/2" center to center.
Colors Available:
Starting at $4.85
Fuse Holder - 3AG-Type, Tweed Style, Solder Lug
Panel mount 3AG fuse holder with solder lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
$4.70
Foot - Rubber, 1" x .56", with Steel Washer
High quality small rubber feet with steel washer inserts. These feet are made of a durable rubber. The diameter is 1” and the height is .56”.
$4.70
package of 4
Dial Lamp - #47, T-3-¼, 6.3V, 0.15A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. The #47 bulb is the most common replacement light used today. Used on the vast majority of Fender amps and many others as well.
$4.50
package of 10
Nut - Fender, Hex Type, for Potentiometers
Hex nut for Fender® potentiometers. Package of 12.
$4.45
package of 12
Foot - Rubber, 1.5" x .75", with Steel Washer
High quality large rubber feet with steel washer inserts. These feet are made of a durable textured rubber. The diameter is 1.5” and the height is .75”.
$4.40
package of 4
Handle - Black plastic strap, Nickel end caps
Black plastic handle with nickel end caps. Screws are not included.
$4.35
Screw - #6 x ¾", Pan Head, Stainless Steel
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
$4.35
package of 12
Foot - Rubber, ⅜" height x ~\frac{15}{16}~" diameter
Package of 4 rubber feet (15/16" diameter x ⅜" height) mounting hole is good for #6 screws.
$4.29
package of 4
Handle - Fender Style, Black strap, Black Metal Caps
Replacement handle for Fender® and other amps (8.27" from mounting center to mounting center). The rubber handle is steel reinforced with steel angular end caps. Mounting hardware sold separately.
$4.29
Hardware - Fender, Screws & T-Nuts for Handle
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$4.10
package of 5
Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$4.00
package of 25
Foot - Rubber, 0.75" Tall, Tapered, 1.625" Top, 1.25" Bottom
Rubber tapered feet with a non-threaded screw hole and a steel washer insert. Sold in a package of 4. Perfect feet for amplifier cabinets or amp heads.
$3.95
package of 4