Amplifier Parts

P-H265X Tilt Back Leg Kit - Fender, for tilting amps
Package of 2
If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender® has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt you amp back so you can hear what you're doing!
  • BF Bandmaster, BF Twin Reverb, SF Bantam Bass, SF Pro Reverb, SF Vibrosonic Reverb, Blonde Bandmaster, BlondeTwin
  • Comes with mounting hardware
Starting at $40.95
P-H2097S Foot - Rubber, 1" x 1", Recessed Bumper, Steel Insert
Package of 4
1" diameter x 1" high with steel insert, recessed bumper. 0.15" mounting hole diameter for #6 screws. Screws not included. Package of 4.
$6.00
P-H225 Vent - Brass, Replacement for Vox / Marshall
Tube Amp Doctor has created an exact replica of the vents used on Vox® amps and the Marshall® Super PA. These high quality brass ventilation grills are hand crafted. Measures 0.720" x 4.805".
$8.50
S-H210 Fuse Holder - 3AG-Type, Tweed Style, Solder Lug
Panel mount 3AG fuse holder with solder lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
$3.55
P-H1091-SINGLE Corner - Marshall, Black Plastic, 3-Hole, Single Corner
Three hole genuine Marshall corners most often used on fronts of heads and cabinets. These corners are sold individually. Mounting rivets sold separately.
For sets of four with uncluded rivets, see P-H1091.
$0.95
P-L007 Indicator Light - Marshall, Purple Square, LED
Genuine Marshall purple indicator light used in older models such as the Vintage Modern 2266 and 2266C.
$5.50
S-HS1032-1F Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Package of 5
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$1.50
P-H218 Vent - Marshall, for top, plastic construction
Top plastic vent for Marshall AVT50 and others, 10 5/6" x 1 9/16".
$4.95
P-H284 Handle - vintage Ampeg style, brown strap
Replacement handle for vintage ampeg amps. Will work on other amplifiers as well. Center to center measurement is 6".
$10.95
P-H331 Handle - Fender, Black Plastic, Silver Caps, 2 screws per cap
Pure Vintage Amplifier Handle (2-screw mount)
  • Black amplifier handle with vinyl sleeve over steel strap and two-screw end caps
  • Includes mounting hardware (four screws and T-nuts)
  • Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers
  • 8" center to center. 9 ¼" handle length without end caps.
$12.45
S-M651 Faceplate - Marshall, 1960 Vintage plate
Original Marshall™ 1960 Vintage plate
  • Fits 1960AV and 1960BV cabinets
  • Black on gold
  • 29 x 85mm
  • Adhesive backing

Not for resale. For repair or replacement only.
$5.50
S-H110 Screws - Fender, 10-32x1.5", Phillips Head, Vintage Amp
Package of 12
Made for Fender® and used on a variety of vintage and contemporary models. Package contains twelve Phillips head (10-32 X 1-½") nickel machine screws used for mounting an amplifier chassis. Used on '57 Twin®, Blues Deluxe™/DeVille™, Pro Junior™, Hot Rod Deluxe™/DeVille™, Blues Junior™, '59 Bassman®, '63 Fender® Tube Reverb, Bronco™, Bass Breaker™, '57 Deluxe™, Bassman® TV Series, EC Twinolux™/Tremolux™, '57 Champ®, EC Vibro-Champ™, and '57 Bandmaster™ amplifiers manufactured from 1994-Present.
$5.85
P-H261-SET Handle - Black strap, Silver Caps and mounting hardware
P-H261 with mounting hardware Includes:
  • (1) P-H261
  • (1) S-HS1032-1F
  • (1) S-HTN1032
$5.90
S-M917 Logo - Fender, plate, for Tweed amplifier
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
  • Genuine Fender® tweed amp logo
  • Mounting pins included
  • Designed for
    • Pro Junior™
    • Blues Junior™
    • JazzMaster™ Ultralight
    • plus others

Fender part number: 099-409-6000
$18.95
P-L119 Jewel - Fender®, for lamps / bulbs, Aqua
Genuine Fender aqua jewel.
$7.95
P-H283 Handle - Ampeg Style, Brown Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$17.95
P-HSG0X Speaker Grill - Flat Black, metal with rubber trim
Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately. Multiple sizes available.
Starting at $6.25
S-H220 Fuse Holder - 3AG-Type, Low Profile, Slotted, Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile slotted cap and reduced overall height. It is a similar style to fuse holders used on many vintage Marshall amps. Mounting nut and rubber washer included.
$3.25
P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
$9.00
P-H282 Handle - Ampeg style, black strap with white stitching
Ampeg-style strap handle. Black. Center to center measurement is 6". Can be used on other amplifiers.
$9.59
S-H204 Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length. Fits into S-H213
$3.50
P-H9550 Foot - Rubber, 1.5" diameter x 1.9" tall, with metal washer
1 ½" diameter x 1 3/16" high with metal washer. Sold individually.
$1.25
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Package of 12
Hex nut for Fender® potentiometers. Package of 12.
$4.45
S-HMR-XG Rivets - Marshall, Gold, for fastening
Gold rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Don't see what you're looking for? Send us your product suggestions!