Amplifier Parts

I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
$1.65
Save 11%
Originally: $1.85

Capacitor cover for Fender® Twin Reverb. Mounting centers are 7 1/8" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".
$14.20
Save 11%
Originally: $15.95

Rubber foot measuring 1 ½" diameter X 1" height with metal washer.
$0.85
Save 11%
Originally: $0.95

Gold cap for vintage handle as used on Marshall JCM800 and others. Sold individually. Fits handle P-H295 and inner clamp P-H295-CMP.
$1.34
Save 11%
Originally: $1.50

Two conductor, nylon, .12" x .22" wire (SPT-1). Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on flexible power cords. Securely anchors, insulates, and protects cable at panel entry points.
$0.45
Save 10%
Originally: $0.50

Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length.
$3.12
Save 11%
Originally: $3.50

Original Marshall™ '100' logo.
This logo is the 3-pin version:
Not for resale. For repair or replacement only.
- Fits 1960HW cab
- Gold lettering on white plastic.
This logo is the 3-pin version:
- Center to center pin spacing between the first two digits = 15/16''
- Center to center pin spacing between the second two digits = 1''
Not for resale. For repair or replacement only.
$8.86
Save 11%
Originally: $9.95

Black metal, 2 hole with lip, radius ½". Sold individually.
$1.34
Save 11%
Originally: $1.50

Colors Available:
$10.64
Save 11%
Originally: $11.95

Colors Available:
Starting at $9.77
Save 11%
Originally: $10.98

Package of 4
Peavey Pop Out Swivel Caster Set- Allows you to remove wheels when necessary
- Four recessed mounting brackets, four ball-bearing swivel wheels and twelve black anodized Phillips wood screws are included
- Caster has maximum load capacity of 80 lbs
- Clam shell packaging
- Weight Unpacked: 2.07 lb(0.94 kg)
- Weight Packed: 2.19 lb(0.993 kg)
- Width Packed: 5.875"(14.9225 cm)
- Height Packed: 9"(22.86 cm)
- Depth Packed: 2.875"(7.3025 cm)
$22.21
Save 11%
Originally: $24.95

Open frame fuse holder with patented self-aligning, snap-in terminal clips. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The uniqu design permits self-alignment of clips to fuse cap. This, plus a one-piece clip / terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips.
$2.76
Save 11%
Originally: $3.10

Package of 5
Colors Available:
- 5mm size
- Water clear
- High brightness
- Multiple colors available
- Package of 5
Starting at $1.16
Save 11%
Originally: $1.30

Replacement latch for Ampeg Flip Top. For use with P-H300-TOP.
All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.
All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.
$3.78
Save 11%
Originally: $4.25

Package of 4
1" stainless steel Phillips head, flat top screw.
$1.25
Save 11%
Originally: $1.40

Package of 2
Pure Vintage Piggyback Clip Bars- Set of two chrome-plated clip bars used to mount "piggyback"-style amplifier heads to amplifier cabinets
- Includes all mounting hardware, including tee nuts, ribbon springs and mounting screws
- Introduced on Blonde and Blackface™ era amplifiers
- Used on Tone-Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
$31.11
Save 11%
Originally: $34.95

Top plastic vent for Marshall AVT50 and others, 10 5/6" x 1 9/16".
$4.41
Save 11%
Originally: $4.95

Black, steel side handle for Marshall 1960AHW and 1960BHW (hand wired) cabinets.
$16.78
Save 11%
Originally: $18.85

Vintage style using only the finest tolex available.
- Height: 17"
- Width: 25"
- Depth: 9.5"
$17.76
Save 11%
Originally: $19.95

Package of 2
Pure Vintage Piggyback Bushings- Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
- Internally threaded to accept piggyback thumbscrews (sold separately)
- Introduced on Blonde and Blackface™-era amplifiers
- Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
$15.09
Save 11%
Originally: $16.95

Back metal panel used on Marshall JCM800, the British Style 800, and the British Style 900 series amps. 27" x 7.125".
$57.81
Save 11%
Originally: $64.95

Vintage style using only the finest tolex available.
- Height: 21"
- Width: 27"
- Depth: 12"
$22.21
Save 11%
Originally: $24.95

Vintage style using only the finest tolex available.
- Height: 18.5"
- Width: 24"
- Depth: 11"
$18.69
Save 11%
Originally: $21.00

For '59 Bassman, Blues Deville 410 (fits all), brown. Dimensions: Height: 22" Width: 23 ½" Depth: 10" top, 11" bottom
$17.76
Save 11%
Originally: $19.95