Amplifier Parts

P-H211 Vent - Marshall, large, plastic construction
Genuine Marshall™ large plastic vent. Measures 17 5/8" in length and 3" in width.
$6.45
P-H252 Foot - Marshall, Sprung Amplifier Head
Package of 2
Original Marshall™ Sprung feet. Screws are included.
$10.75
P-H355 Handle - Marshall Style, Black Plastic, Nickel Hardware
Marshall style amp handle. Black plastic handle with two nickel end caps and two inner clamps for mounting. 9 3/4" center to center mounting slots.
$12.95
P-H294 Handle - Marshall, Black Vintage, Black Caps, Large, Strap
Vintage strap. Large, black with black caps. Includes:
  • 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
  • 2 × Mounting brackets
  • 2 × Black "Marshall" bracket covers
  • 1 × Rubber handle with metallic insert
$10.76
P-H281 Handle - Ampeg Style, Black Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$15.95
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.95
P-H295 Handle - Marshall Style, Black, Gold Ends, Vintage Strap, Large
Vintage strap. Large black. Inner clamp and end caps sold separately. See P-H295-CMP for inner clamp. See P-H295-GC for end cap.
  • Center to center: 9.875"
  • Overall length: 11.25"
$10.92
P-H9600 Foot - Rubber, 1.5" diameter x .425" tall
Rubber foot. 1.5" diameter x 0.425" height. 0.175" diameter mounting hole for use with #8 screws. (Sold individually, mounting hardware not included).
$0.95
P-H301X Handle - Peavey, Black Strap with Metal End Caps
Cap Colors Available:
Strap, black with metal caps. Center to center mounting is 8.25".
Starting at $5.65
P-HW06 Anti-Skid Tray - Marshall, for 1960A and Other Cabinets
Original Marshall black plastic skid. Inscribed with "Marshall" logo. Used on 1960A and other cabinets. Package of one includes 6 gold rivets.
$11.50
P-H296 Handle - Marshall, Black Plastic, Recessed for Cabinet
Recessed plastic side handle for cabinets. Outer Dimensions: 6.19" x 10.63". Molded with a 1.75" Marshall logo.
$24.95
P-H315 Handle - Reddish-Brown Vintage, Soft Leather, Flat
Flat amp handle. Vintage style 100% soft leather. Reddish-brown. Mounts and screws not included (see P-H282A). Center to center measurement is 6-¾".
$10.65
On Backorder
P-H9310 Foot - Peavey, small rubber, 1" x ⅝"
Package of 4
Peavey, small rubber feet. 1" diameter x 5/8" height. (Package of 4, includes 4 mounting screws).
$5.25
P-H299 Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Package of 4
Pure Vintage 2-screw mount amplifier, package of 4, screws included.
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes eight mounting screws
  • Introduced on Blonde, Brown, and Blackface™-era amplifiers
  • Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
$8.45
P-L14-120 Indicator Light - Marshall, Red Square, 120V
Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)
$4.85
P-NE51 Dial Lamp - NE51, T-3-¼, 90/110V, .0003A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold individually.
$1.95
P-H269X Handle - Fender®, molded Dogbone style
Colors Available:
Original Fender® handle, brown molded dogbone style. 6" center to center. Includes mounting hardware. Fender part number: 099-0946-000
$11.95
S-H251 Piggyback Hardware - Fender, Thumb Screws
Package of 2
Thumb screws for piggyback amplifier, used for locking amp heads to cabs. Original Fender.
$11.95
S-H203 Fuse Holder Cap - Peavey, top-slotted for screwdriver
Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.
$3.85
P-HW12 Caster - Small Swivel, 2", 4 Screw Mount
Small swivel caster with a black wheel having 50mm diameter x 21mm width. Four ¼" diameter mounting holes. Mounting hardware not included.
$4.25
P-H516 Relay - Fender®, DPDT, 24 V, replacement
Original Fender®, DPDT, 24V, used in Blues Deluxe®, Blues Deville®, Hot Rod Deluxe®, Hot Rod Deville®.
$3.15
P-46 Dial Lamp - #46, T-3-¼, 6.3V, .25A, Screw Base
Package of 10
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
$3.00
P-H312 Handle - Black plastic strap, Black Caps, adjustable 8" - 8.75"
Black plastic handle with black end caps. Mounting centers adjustable from 8" to 8.75". 9 5/8" handle length without end caps. Screws not included.
$2.95
P-H710 Capacitor Cover - Fender®, for Twin Reverb
Capacitor cover for Fender® Twin Reverb. Mounting centers are 7 1/8" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".
$16.95
Don't see what you're looking for? Send us your product suggestions!