Amplifier Parts

P-H282 Handle - Ampeg style, black strap with white stitching
Ampeg-style strap handle. Black. Center to center measurement is 6". Can be used on other amplifiers.
$10.29
P-L110 Dial Lamp - Front Panel Indicator Light, Relampable
Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
  • 11/16" chassis hole
  • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
  • Rating: 125V, 75W
  • Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
$10.95
P-H307X Handle - Black Metal, Recessed for Cabinet
Recessed black metal handle for installation in cabinets
Starting at $8.35
S-H201 Fuse Holder - for Fender®, 3AG-Type
High quality Fender® Style fuse holder replacement for guitar amplifiers.
  • Fits ½" chassis hole diameter
  • Mounted by Nut
$2.75
P-L119 Jewel - Fender®, for lamps / bulbs, Aqua
Genuine Fender aqua jewel.
$7.95
P-H1315 Rubber feet - 7/16” Dome Shape, Embedded 6-32 Screw
Dome shaped rubber feet with an embedded 6-32 machine screw. These feet have a 0.4375 inch diameter and have a 0.25 inch screw length. The embedded screw provides a sleek appearance. These are great feet and can also be used as bumpers.
$0.95
P-H250 Foot - Fender, vintage Sphinx Glides
Keep your amplifier protected and looking great by replacing missing or damaged feet with new genuine Fender nickel-plated "Sphinx Glide" amplifier feet. Metal amplifier cabinet glide feet with rubber bushings and mounting screws. Fender part number: 099-3900-000
$8.95
package of 4
P-HFIBER-A Fiberboard - Vulcanized, 3" x 15", .062" Thick
Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.
  • .062" thick
  • 3" x 15"
$2.65
P-L200 LED Bezel - for 3mm LED, used for mounting
Holder for mounting LEDs to panels.
$1.05
P-L710-X LED Lens - Fresnel, Polycarbonate, 5mm
Colors Available:
Panel mount led lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • ¼” mounting hole
  • For panel thicknesses of 1/16” to ⅛”
  • Fresnel lens
  • Low Profile

For a version that fits 3mm LEDs, see P-L310-X.
Starting at $0.59
P-H315 Handle - Reddish-Brown Vintage, Soft Leather, Flat
Flat amp handle. Vintage style 100% soft leather. Reddish-brown. Mounts and screws not included (see P-H282A). Center to center measurement is 6-¾".
$10.65
On Backorder
P-H261B Handle - Fender Style, Black strap, Black Metal Caps
Replacement handle for Fender® and other amps (8.27" from mounting center to mounting center). The rubber handle is steel reinforced with steel angular end caps. Mounting hardware sold separately.
$4.29
P-H1084N Corner - Steel, 2-Hole, 18 Gauge, ¾" Thickness
Steel, 2-Hole corner. Replacement for Fender® Corner wraps around inside edge of cabinet. See S-H101 for mounting hardware.
  • Works on ¾" of wood + material thickness
  • 18 gauge steel
  • 12mm / ½" radius
  • For Fender®
  • Sold individually.
$1.08
P-H9700 Foot - Rubber, 1.5" diameter x 1" tall, with metal washer
Rubber foot measuring 1 ½" diameter X 1" height with metal washer.
$1.00
S-HSM6-1X30 Screw - M6-1.0 x 30mm, Phillips, Pan Head, Zinc, coarse thread
Phillips pan head machine screw, 1 x 30. Designed to go through a pre-tapped hole or nut to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$2.19
package of 5
P-H336X Handle - Modern Style, Black Grip, Die-cast Ends
This handle has a flexible molded black grip with two rugged die-cast mounts. There are two holes per mount for use with M4 screws. See specifications below for dimensions.
$2.99
P-HTUR-216-BRN Turret Board - Blank, 216 Holes, 10 ⅛” x 3”, Phenolic
Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 216 hole version has 8 rows and 27 columns. This size can be found in vintage Marshall amps such as various revisions of the JTM45 and 50W JMP amps.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.
$7.50
P-H283 Handle - Ampeg Style, Brown Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$21.80
P-L124-P Dial Lamp - Fender Style, Premium Pilot Assembly
Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
  • 11/16" chassis hole
  • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
  • Rating: 125V, 75W
  • Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
$3.95
F-Z3AG-F Fuse - Fast-Blow, 250V, 3AG, 0.25" x 1.25"
Protect your expensive investment or hobby with inexpensive fuses.
Starting at $2.25
package of 5
P-H312 Handle - Black plastic strap, Black Caps, adjustable 8" - 8.75"
Black plastic handle with black end caps. Mounting centers adjustable from 8" to 8.75". 9 5/8" handle length without end caps. Screws not included.
$2.99
S-H204 Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length. Fits into S-H213
$3.50
P-H1427C1 Handle - Hammond, steel construction, 1427C1
Special Order Item
Round steel handle with 4" mounting hole center. 1.3" tall. Hardware included.
$5.02
Note: special order items require additional lead time. See our page on special order items.
S-HTUR-BI-3S Turrets - Bifurcated, for use on 3mm boards
Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10
Don't see what you're looking for? Send us your product suggestions!