Amplifier Parts

P-STX-CVR Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
  • 9 pin (noval) socket hole cover
  • 5mm x 3.5mm mounting holes
  • 27.1mm center to center

P-ST8-CVR
  • 8 pin (octal) socket hole cover
  • 6.5mm x 3.5mm mounting holes
  • 40mm center to center

P-ST8-ST9-CNVRT
  • 8 pin to 9 pin (octal to noval) socket adapter
  • Bottom mount 9 pin socket recommended
$2.75
P-L14-6-CLIP Indicator Light Clip - Marshall, for securing lights
Clip for square Marshall indicator lights - used to secure the indicator lights in place
$4.95
S-H259 Fuse Block - for 3AB and 3AG fuses, low profile
Open frame fuse holder with patented self-aligning, snap-in terminal clips. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The uniqu design permits self-alignment of clips to fuse cap. This, plus a one-piece clip / terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips.
$3.10
P-H9700 Foot - Rubber, 1.5" diameter x 1" tall, with metal washer
Rubber foot measuring 1 ½" diameter X 1" height with metal washer.
$1.00
On Backorder
P-HW05 Caster - Marshall, 2", with socket, for cabinets
Original Marshall caster and socket with a black wheel having 50mm diameter x 20mm width. Used on 1960A, 1960B and other cabinets. Package of one includes four mounting screws. Caster screws into black plastic socket base.
$17.95
On Backorder
P-H1200 Strain Relief - for ¾" x ~\frac{27}{32}~" hole, ~\frac{5}{16}~" cord diameter
16/3 SJT, 5/16" cord diameter. These one piece Strain Relief Bushings securely anchor, absorb, and protect cables and wires from push/pull and twist forces, while insulating them from irregular or sharp panel edges. They are easily and quickly installed with special installation pliers or other hand or production tools. Black H.S. Nylon, and the temperature index is 105° Centigrade.
$0.85
P-H295-GC Handle Cap - Marshall Style, for Vintage Handle
Gold cap for vintage handle as used on Marshall JCM800 and others. Sold individually. Fits handle P-H295 and inner clamp P-H295-CMP.
$1.50
P-H307X Handle - Black Metal, Recessed for Cabinet
Recessed black metal handle for installation in cabinets
Starting at $6.95
P-H311 Handle - Black plastic strap, Nickel end caps
Black plastic handle with nickel end caps. Screws are not included.
$3.95
P-H281-BS Handle - Ampeg Style, Black Vintage, Black Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$13.12
P-H262-X Handle - Fender Style, Strap, 6.375” Spacing
Colors Available:
Replacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)
Starting at $9.50
P-44 Dial Lamp - #44, T-3-¼, 6.3V, .25A, Bayonet Base
Package of 10
Long life general replacement lamps for dials, indicators, etc.
$3.00
P-H295-CMP Handle Inner Clamp - for Marshall Old Style Handle
Old style inner clamp. Sold individually. Screws not included
$0.95
P-H332-X Handle - Fender, Vinyl, Silver Caps, 1 screw per cap
Colors Available:
Pure Vintage Amplifier Handle (1-screw mount). Vintage style amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps. Includes mounting hardware (two screws and T-nuts)
Starting at $9.45
P-H186 Washer - Rubber, Chassis Mount, ⅞" Diameter
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. Allows proper dial centering in cabinet opening. Overall dimensions 0.875" dia. x .233" thick.
$0.75
R-VTL5CX Optocoupler - Xvive, Vactrol, VTL5C Series
High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
Starting at $5.50
P-H264X Chassis Strap - Fender, vintage amplifier
Package of 2
Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.
$9.95
P-L35X LED - 5mm diameter, diffused lens, 5 mCd
Package of 5
Colors Available:
New!:
5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.
  • 5mm size
  • Tinted and diffused
  • Multiple colors available
  • Package of 5
$0.70
P-L300X LED - 3mm diameter, diffused lens, 3.6 mCd
Package of 5
Colors Available:
New!:
Lens Diameter: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.
$0.70
S-HHNX Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Starting at $0.30
P-H263-X Handle - Fender Style, Strap, 6.5” Spacing
Colors Available:
High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".
$10.65
P-SP2-500 Receptacle - AC, Mates with S-W123 & S-W124 with Fuse Holder
I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
$1.85
P-H1050 Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
$1.25
S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
Don't see what you're looking for? Send us your product suggestions!