Amplifier Parts

Pure Vintage 2-screw mount amplifier, package of 4, screws included.

• Set of four nickel-plated replacement amplifier corners for effective amplifier protection
• Includes eight mounting screws
• Introduced on Blonde, Brown, and Blackface™-era amplifiers
• Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers

Pure Vintage 3-screw mount amplifier corners

• Set of four nickel-plated replacement amplifier corners for effective amplifier protection
• Includes 12 mounting screws
• Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin® amplifiers

Tube Amp Doctor has created an exact replica of the vents used on Vox® amps and the Marshall® Super PA. These high quality brass ventilation grills are hand crafted. Measures 0.720" x 4.805".

Optocoupler. Vibrato LDR for Fender Amps. Fix the dead LDR-style tremolo on your vintage Fender amps as well as others.

• Non-polarized optical side is indicated by silver dot and slightly longer leads
• Resistive side is indicated only by slightly shorter leads
• This neon lamp optocoupler is commonly referred to as a roach

Keep your amplifier protected and looking great by replacing missing or damaged feet with new genuine Fender nickel-plated "Sphinx Glide" amplifier feet. Metal amplifier cabinet glide feet with rubber bushings and mounting screws. Fender part number: 099-3900-000

Silver rivets for fastening amplifier corners. For use on all Marshalls.

Gold rivets for fastening amplifier corners. For use on all Marshalls.

Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
For similar generic front corners, see P-H3081.

Pure Vintage Amplifier Handle (1-screw mount). Vintage style amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps. Includes mounting hardware (two screws and T-nuts)

Replacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)

200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.

Oversized blank G-10 epoxy boards perfect for custom turret or eyelet boards. The large size can be cut down to make multiple boards. With no predilled holes, builders can make clean custom layouts for their projects.

Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.

Plexi style pilot lights that operate on 120VAC. These lights match the style used on many vintage Marshall amplifiers. The lights use a neon bulb with an internal current limiting resistor so no external circuitry is required for use. The mounting diameter hole is 0.380” (9.65mm). Includes an internal tooth lock washer and hex nut.

300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.

Ampeg-style strap handle. Black. Center to center measurement is 6". Can be used on other amplifiers.

High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".

Flat amp handle. Vintage style 100% soft leather. Reddish-brown. Mounts and screws not included (see P-H282A). Center to center measurement is 6-¾".

Original Marshall™ Sprung feet. Screws are included.

Vintage strap. Large, black with black caps. Includes:

• 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
• 2 × Mounting brackets
• 2 × Black "Marshall" bracket covers
• 1 × Rubber handle with metallic insert

Replacement handle for vintage ampeg amps. Will work on other amplifiers as well. Center to center measurement is 6".

Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.

• 11/16" chassis hole
• Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
• Rating: 125V, 75W
• Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123

Vintage strap. Large black. Inner clamp and end caps sold separately. See P-H295-CMP for inner clamp. See P-H295-GC for end cap.

• Center to center: 9.875"
• Overall length: 11.25"

Original Marshall black plastic top insert (caster cups). Used on 1960B and other cabinets. Package of 4 includes 16 gold rivets.