Amplifier Parts

S-M911-X Logo - Fender, Flat, silver with accent color
Accent Colors Available:
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
  • Genuine Fender® flat black amplifier logo
  • Mounting screws included
  • Designed for Bassman® series, Super-Sonic™ series and Vibro-King® series amplifiers plus others

Measurements:
  • Bottom Horizontal Mounting Holes Center-To-Center : 4.14” (150.1mm)
  • Top Horizontal Mounting Holes Center-To-Center : 3.18” (81.9mm)
  • Vertical Mounting Holes On “F” Center-To-Center : 1.98” (50.4mm)
  • Vertical Mounting Holes On “R” Center-To-Center : .98” (24.9mm)
$16.50
P-H295-S Handle - Marshall Style, Black Vintage, Silver Ends, Large
Large Marshall style, vintage type large plastic handle with silver ends. Caps sold separately.
$13.25
P-H3082 Corner - Marshall Style, Textured Black Plastic, 4-Hole, Rear
Marshall style back corner made of black plastic with a textured surface. These corners feature ¾" radius for the outer edge and a 90° angle for the flat back edge. These corners are a great option for amplifier cabinets and other equipment. Similar to the genuine Marshall back corners P-H1090.
$1.09
P-LBL-BUILD-2 Label - Quality Assurance, Vintage Style Sticker
Vintage style quality assurance label. This label has an electronic test line for the name of a technician responsible for testing the electronics and a sound test line for the name of a technician responsible for testing the functionality of the device. This sticker is a great way to document quality assurance testing with a professional presentation on the chassis of a pedal or amp.
$1.95
P-41 Dial Lamp - #41, T-3-¼, 2.5V, .50A, Screw Base
Package of 10. Long life general replacement lamps for dials, indicators, etc.
$3.00
package of 10
P-H355 Handle - Marshall Style, Black Plastic, Nickel Hardware
Marshall style amp handle. Black plastic handle with two nickel end caps and two inner clamps for mounting. 9 3/4" center to center mounting slots.
$13.95
P-53 Dial Lamp - #53, G-3-½, 14.4V, .12A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
$3.00
package of 10
P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
For similar generic front corners, see P-H3081.
$9.00
Out of Stock
P-H1308 Foot - Rubber, ¼" tall with ½" diameter, countersunk
1/4" tall x 1/2" outside diameter. Interior through hole diameter is 1/8". A counter sunk hole for the screw or nail (not included) is ¼" diameter x 3/16" deep
$3.25
package of 4
P-H225 Vent - Brass, Replacement for Vox / Marshall
Tube Amp Doctor has created an exact replica of the vents used on Vox® amps and the Marshall® Super PA. These high quality brass ventilation grills are hand crafted. Measures 0.720" x 4.805".
$8.50
P-H281 Handle - Ampeg Style, Black Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$17.95
P-HC-10 Amp Cover - For Fender Vintage Silverface Champ
Vintage style using only the finest tolex available.
  • Height: 14"
  • Width: 17"
  • Depth: 7"
$20.35
P-HCF-102 Amp Cover - Fender®, for 65 Deluxe Reverb
Black polyester cover or '65 Deluxe Reverb, black. Designed to fit '65 Deluxe Reverb® Reissue (1993-present) and Super-Sonic™ 22 Combo (2010-present) amplifiers
$20.95
P-H289 Handle - Pocket, Black, Plastic, Recessed for Cabinet
Black pocket handle for cabinets. These recessed handles are made of a thick and durable plastic. They sit nearly flush to the side of a cabinet for a clean look that still provides a solid grip when carrying the cabinet.
$4.95
S-H218 Fuse Holder - 3AG-Type, Tweed Style, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.
$5.95
S-HSOH4-12 Screw - #4 x ½”, Slotted, Oval Head, Wood, Nickel-plated
#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.
$1.79
package of 5
On Backorder
P-H3087 Corner - Matte Black Plastic, 2-Hole, 7/32” Radius
Corner made of black plastic with a matte surface. These corners feature 7/32” radius and two mounting holes. This radius can also work on ¼” radius edges with a very small gap. These corners are a great option for amplifier cabinets and other equipment.
$1.09
P-H322 Handle - Marshall, Black Metal, for 1960HW
Black, steel side handle for Marshall 1960AHW and 1960BHW (hand wired) cabinets.
$18.85
Out of Stock
P-HC-12 Amp Cover - For Fender '70s Twin Reverbs
Vintage style using only the finest tolex available.
  • Height: 19"
  • Width: 26.5"
  • Depth: 11"
$35.33
S-HPRH4-114 Screw - #4 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.
$2.15
package of 5
P-HW04 Caster Cups - Marshall, for 1960B and Other Cabinets, set of 4
Original Marshall black plastic top insert (caster cups). Used on 1960B and other cabinets. Package of 4 includes 16 gold rivets.
$11.00
package of 4
S-H205-INSL Insulation Cover - Fuse Holder, 15.5 x 36.8mm, PVC
High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features
  • Provides insulation against shock on rear of fuse holder
  • PVC
  • UL94V-0 rated flame retardant material

Fits S-H205
$2.65
S-HMR-XS Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Out of Stock
K-SNUBX Snubber Kit - eliminate fuzz from amplifier
Snubber parts kit for circuits. Used to build a "snubber circuit" to remove unwanted high frequencies and high voltages resulting from output transformer ringing in a guitar amplifier, without the "brick wall" effect of using diodes.
Starting at $8.25
Don't see what you're looking for? Send us your product suggestions!