Amplifier Parts

F-ZS Fuse - Slow-Blow, 250V, 3AG, 0.25" x 1.25"
Package of 5
The 3AG Slo-Blo fuse solves a broad range of application requirements while offering reliable performance and costeffective circuit protection. Fits fuse block S-H259 and fuse holder S-H201.
Starting at $2.89
Save 11%
Originally: $3.25
S-H205 Fuse Holder - 3AG-Type, High Quality
High quality fuse holder used with 3AG type fuse. Fits in a 1/2" diameter chassis hole. Frame and cap material: phenolic Terminal material: Nickel-plated brass Mounted by nut
$1.83
Save 11%
Originally: $2.06
F-ZGMD-S Fuse - Slow-Blow, 250V, Miniature, 5mm x 20mm
Package of 5
Protect your expensive investment or hobby with inexpensive fuses. Time-delay, low breaking capacity. Rated at 250V. Package of 5
Starting at $3.34
Save 11%
Originally: $3.75
S-H201 Fuse Holder - for Fender®, 3AG-Type
High quality Fender® Style fuse holder replacement for guitar amplifiers.
  • Fits ½" chassis hole diameter
  • Mounted by Nut
$1.74
Save 11%
Originally: $1.95
S-H203 Fuse Holder Cap - Peavey
Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.
$2.63
Save 11%
Originally: $2.95
S-VIBRACONE Vibrapod Cone - 25 lb Support, Can Use with Vibrapods
Vibrapod Cones
  • Double truncated vinyl cone with 7/16 stationary chrome ball (it does not roll).
  • 1" tall by 1 5/8" diameter. 25 lbs maximum weight each.
  • Designed for use with Vibrapod isolators or by themselves.
  • Suitable for CD, DVD, DSS Receivers, DAC's, Pre amps, Amplifiers, Integrateds, Turntables, Speakers

Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane. You will notice an extended, more defined bass, improved imaging and sound stage, greater dynamics and detail, plus sharper video images. VIBRAPOD Isolators and Cones should be placed under flat areas of the component with more at or near the heaviest areas and at the edges.
$7.12
Save 11%
Originally: $8.00
F-ZF Fuse - Fast-Blow, 250V, 3AG, 0.25" x 1.25"
Package of 5
Protect your expensive investment or hobby with inexpensive fuses.
$2.23
Save 11%
Originally: $2.50
F-ZGMA-F Fuse - Fast-Blow, 125 or 250V, Miniature, 5mm x 20mm
Package of 5
Protect your expensive investment or hobby with inexpensive fuses. • GMA Type • Rated at 250V • Measures .78"(20mm) in length, 0.19"(5mm) in diameter • Fast-Blow • Package of 5
$3.34
S-H204 Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length.
$3.12
Save 11%
Originally: $3.50
S-H259 Fuse Block - for 3AB and 3AG fuses, low profile
Open frame fuse holder with patented self-aligning, snap-in terminal clips. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The uniqu design permits self-alignment of clips to fuse cap. This, plus a one-piece clip / terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips.
$2.76
Save 11%
Originally: $3.10
S-H200 Fuse Holder - for Marshall, ¼" Fuses
Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes). Suitable for 1/4" fuses. UL and CSA approved. Electrical Specifications:
  • Rated current: 10A
  • Rated voltage: 250V AC
  • Contact resistance: 2MΩ @ 250V DC or less
  • Dialectric withstand: 1 minute @ 1500V AC
  • Insulation resistance: 100MΩ or more @ 500V DC
$3.34
Save 11%
Originally: $3.75
F-Z-KIT Fuse Kit - Fast and Slow Blo, 160 Fuses Total
Package of 160
Fuse kit, fast and slow blow.
Contains the following fuses:
  • 20x Slo-Blo, 2 Amp F-ZS020
  • 20x Slo-Blo, 3 Amp F-ZS025
  • 20x Slo-Blo, 1 Amp F-ZS010
  • 20x Slo-Blo, 4 Amp F-ZS035
  • 20x Slo-Blo, 5 Amp F-ZS040
  • 20x Fast-Blo, 2.5 Amp F-ZF020
  • 20x Fast-Blo, 1 Amp F-ZF010
  • 20x Fast-Blo, 3 Amp F-ZF025
$76.50
Save 11%
Originally: $85.95
S-H206 Fuse Holder - Fender, for ¼" Fuses, PCB Mounting
PCB mounting. Suitable for ¼" D x 1 ¼" L fuses.
$3.52
Save 11%
Originally: $3.95
S-VIBRAX-4 Vibrapod Isolator - Model 3, Package of 4
Package of 4
Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane.
$22.25
Save 11%
Originally: $25.00
S-H207 Fuse Cap - PCB Mounting Universal
PCB Mount Fuse Cap.
  • 1.31” x 0.42”
  • Takes GMA sized fuse
$4.41
Save 11%
Originally: $4.95
P-SP2-500-CAP Replacement Fuse Holder Cap - For P-SP2-500
Fuse holder cap replacement for P-SP2-500 power receptacle.
$0.89
Save 11%
Originally: $1.00
Don't see what you're looking for? Send us your product suggestions!