Amplifier Parts

S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.35
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.75
S-HTNX Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Package of 5
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.00
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
P-H211 Vent - Marshall, Large Plastic
Genuine Marshall™ large plastic vent.
Measures 17 5/8" in length and 3" in width.
$5.95
S-H110 Screws - Fender, 10-32x1.5", Phillips Head, Vintage Amp
Package of 12
Made for Fender® and used on a variety of vintage and contemporary models. Package contains twelve Phillips head (10-32 X 1-½") nickel machine screws used for mounting an amplifier chassis. Used on '57 Twin®, Blues Deluxe™/DeVille™, Pro Junior™, Hot Rod Deluxe™/DeVille™, Blues Junior™, '59 Bassman®, '63 Fender® Tube Reverb, Bronco™, Bass Breaker™, '57 Deluxe™, Bassman® TV Series, EC Twinolux™/Tremolux™, '57 Champ®, EC Vibro-Champ™, and '57 Bandmaster™ amplifiers manufactured from 1994-Present.
$5.50
S-HSM4D7-20 Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
Package of 4
(Metric Threading: M4 x 0.70) - 20 mm long
$0.80
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$3.00
S-H251 Screw - Fender®, Thumb screws, Piggyback
Package of 2
Thumb screws. Package of two. Fender part number: 099-0720-000
$11.95
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Package of 12
Hex nut for Fender® potentiometers. Package of 12.
$4.25
S-H253 Bushing - Fender, Piggyback
Package of 2
Pure Vintage Piggyback Bushings
  • Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
  • Internally threaded to accept piggyback thumbscrews (sold separately)
  • Introduced on Blonde and Blackface™-era amplifiers
  • Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
$16.95
P-H218 Vent - Marshall, Top Plastic
Top plastic vent for Marshall AVT50 and others, 10 5/6" x 1 9/16".
$4.95
P-HSGA1 Clamp - Speaker Grill Mount, Plastic
Black plastic clamp for mounting speaker grills. Sold individually, mounting hardware not included.
$0.65
P-H212-A Panel - Yellow Zinc, replacement for Marshall JCM800
Back metal panel used on Marshall JCM800, the British Style 800, and the British Style 900 series amps. 27" x 7.125".
$64.95
P-HSG0X Speaker Grill - Flat Black
Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately.
Multiple sizes available.
Starting at $5.95
P-H720 Panel - for Deluxe Reverb
Basic front panel for Deluxe Reverb. Material is.032" aluminum.
$19.95
S-H252 Clip Bars - Fender, Piggyback
Package of 2
Pure Vintage Piggyback Clip Bars
  • Set of two chrome-plated clip bars used to mount "piggyback"-style amplifier heads to amplifier cabinets
  • Includes all mounting hardware, including tee nuts, ribbon springs and mounting screws
  • Introduced on Blonde and Blackface™ era amplifiers
  • Used on Tone-Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
$34.95
P-H225 Vent - Brass, Replacement for Vox / Marshall
Tube Amp Doctor has created an exact replica of the vents used on Vox® amps and the Marshall® Super PA. These high quality brass ventilation grills are hand crafted. Measures 0.720" x 4.805".
$8.50
P-H721 Panel - for Super Reverb
Basic front panel for Super Reverb. Material is .032" aluminum.
$19.95
P-H210 Vent - Marshall, Top Metal
Genuine Marshall™ top metal vent. 16 7/8" x 2 ¼".
$35.75
P-HSG0X-PV Speaker Grill - Peavey, with mounting hardware
Peavey Grill Kit (for speaker cone and dust cap protection)
  • Manufactured from 1.2mm steel
  • Matte black powder coated paint finish
  • Surrounded with rubber trim insulator to reduce rattle
  • Four 90 degree mounting brackets and 1/4-20 hardware included
Starting at $12.95
S-H104 Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
Package of 25
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$3.00
Save 25%
Originally: $4.00
Don't see what you're looking for? Send us your product suggestions!