Amplifier Parts

S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.65
package of 5
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.59
package of 5
P-H248-P Screw - 8-32, #12 Reverse Thread, Speaker Baffle Mount
High-quality 8/32 machine screws with #12 reverse wood screw threading at the head. These screws are a simple solution for mounting speakers to baffle boards and were commonly used on many vintage amplifiers. Nuts sold separately.
$0.79
package of 4
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.15
package of 5
S-H105 Screw - 1", Phillips, Oval Head, Matching T-Nut
1" Oval head, Phillips screw with matching t-nut. (package of 4)
$1.99
package of 4
S-HPOH6-X Screw - #6, Phillips, Oval Head, Wood, Nickel-plated
#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.
Starting at $1.25
package of 4
S-HSB6-X Screw - 6-32, Phillips, Round Head, Machine, Brass
6-32 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 6-32 size works in place of original M3.5 screws that were used for the rotary selector switches, octal sockets, capacitor clamps, and chokes. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
Starting at $2.19
package of 5
S-HSM6-1X30-SS Screw - M6x1.0 x 30mm, Phillips, Pan Head, Machine, Stainless Steel
Stainless steel M6 screws that are nearly identical to the chassis mounting screws used on many Marshall amps. These 30mm long pan head screws pair with the oversized washers S-HOW-M6 to attach amplifier chassis to head cabinets. Fits any Marshall head that uses M6 screws.
$1.09
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Starting at $0.72
package of 5
S-HBS8-38 Screw - #8 x 3/8”, Phillips, Pan Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.
$1.89
package of 5
S-HSB4-X Screw - 4-40, Phillips, Round Head, Machine, Brass
4-40 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 4-40 size works in place of original M3 screws that were used for the AC inlet, noval sockets, PCB and turret board standoffs, and the P-H1700 and S-HM100-A rotary selectors. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. Use with S-ASP4-X spacers for board standoffs. S-HBWX flat washers are also available.
Starting at $1.59
package of 5
S-HBS6-516 Screw - #6 x 5/16”, Phillips, Pan Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws with blunt tips. These pan head #6 screws have a length of 5/16” and are commonly used to secure 9-pin sockets and other hardware to the chassis of blackface and silverface amps. These are also used in some tweed amps for securing the fiberboard and other hardware to the chassis. For the larger #8 blunt tip machine screws found in vintage Fender® amps, see S-HBS8-38.
$1.29
package of 5
S-HRS8-1116 Screw - #8-32 x 1-1/16” Rosette Head, Machine, Brass-plated
#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.
$1.89
package of 4
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $1.15
package of 5
S-HRS6-114 Screw - #6-32 x 1 ¼” Rosette Head, Machine, Bronze-plated
#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.
$1.89
package of 4
S-HFS10-34 Screw - #10 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.
$1.95
package of 5
S-HPOH3-38 Screw - #3 x ⅜”, Phillips, Oval Head, Wood, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.
$1.59
package of 5
S-HPOH8-X Screw - #8, Phillips, Oval Head, Wood, Nickel-plated
#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.
Starting at $2.15
package of 4
S-HFS8-34 Screw - #8 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.
$1.59
package of 5
S-HPOH4-12 Screw - #4 x ½”, Phillips, Oval Head, Sheet Metal, Nickel-plated
#4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.
$1.25
package of 5
S-HPRH3-14 Screw - #3 x ¼”, Phillips, Round Head, Wood, Nickel-plated
#3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.
$1.79
package of 5
S-H110 Screws - Fender, 10-32x1.5", Phillips Head, Vintage Amp
Made for Fender® and used on a variety of vintage and contemporary models. Package contains twelve Phillips head (10-32 X 1-½") nickel machine screws used for mounting an amplifier chassis. Used on '57 Twin®, Blues Deluxe™/DeVille™, Pro Junior™, Hot Rod Deluxe™/DeVille™, Blues Junior™, '59 Bassman®, '63 Fender® Tube Reverb, Bronco™, Bass Breaker™, '57 Deluxe™, Bassman® TV Series, EC Twinolux™/Tremolux™, '57 Champ®, EC Vibro-Champ™, and '57 Bandmaster™ amplifiers manufactured from 1994-Present.
$5.85
package of 12
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$4.10
package of 5
S-HS1032-1F Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$2.45
package of 5
Don't see what you're looking for? Send us your product suggestions!