Amplifier Parts

Ampeg

Ampeg, founded in 1946 by Everett Hull and Stanley Michaels, is a manufacturer best known for its bass amplifiers.

Marshall

Marshall guitar amplifiers are among the most recognized in the world. They are known for their Marshall "crunch".

Fender

Fender® - Founded in Fullerton California by Leo Fender, Fender Musical Instruments Corp is the world's foremost manufacturer of guitars, basses, amplifiers and related equipment dating back to the 1940's.
P-H332-X Handle - Fender, Vinyl, Silver Caps, 1 screw per cap
Colors Available:
Pure Vintage Amplifier Handle (1-screw mount). Vintage style amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps. Includes mounting hardware (two screws and T-nuts)
Starting at $8.95
P-H1091 Corner - Marshall, Black Plastic, 3-Hole, with rivets
Package of 4
Front corner set, 3/4" radius. Includes gold rivets. Sold in package of 4
$6.75
P-H1090 Corner - Marshall, Black Plastic, 4-Hole, Rear, with rivets
Package of 4
Marshall back corners with gold rivets. ¾" radius.
$6.95
P-H294 Handle - Marshall, Black Vintage, Black Caps, Large, Strap
Vintage strap. Large, black with black caps. Includes:
  • 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
  • 2 × Mounting brackets
  • 2 × Black "Marshall" bracket covers
  • 1 × Rubber handle with metallic insert
$10.76
P-H269X Handle - Fender®, molded Dogbone style
Colors Available:
Original Fender® handle, brown molded dogbone style. 6" center to center. Includes mounting hardware. Fender part number: 099-0946-000
$11.95
P-H296 Handle - Marshall, Black Plastic, Recessed for Cabinet
Recessed plastic side handle for cabinets. Outer Dimensions: 6.19" x 10.63". Molded with a 1.75" Marshall logo.
$24.95
P-H299 Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Package of 4
Pure Vintage 2-screw mount amplifier, package of 4, screws included.
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes eight mounting screws
  • Introduced on Blonde, Brown, and Blackface™-era amplifiers
  • Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
$7.95
S-HMR-XG Rivets - Marshall, Gold, for fastening
Gold rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
P-H331 Handle - Fender, Black Plastic, Silver Caps, 2 screws per cap
Pure Vintage Amplifier Handle (2-screw mount)
  • Black amplifier handle with vinyl sleeve over steel strap and two-screw nickel-plated end caps
  • Includes mounting hardware (four screws and T-nuts)
  • Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers
  • 8" center to center. 9 ¼" handle length without end caps.
$11.95
S-HMR-XS Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
P-H300 Handle Latch - Ampeg, Suitcase Flip Top
Replacement latch for Ampeg Flip Top. For use with P-H300-TOP.
All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.
$4.25
P-H298 Corners - Fender, for amplifier, Steel, 3-Hole with hardware
Package of 4
Pure Vintage 3-screw mount amplifier corners
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes 12 mounting screws
  • Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin® amplifiers
$7.95
P-H322 Handle - Marshall, Black Metal, for 1960HW
Black, steel side handle for Marshall 1960AHW and 1960BHW (hand wired) cabinets.
$18.85
P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
$9.00
On Backorder
Don't see what you're looking for? Send us your product suggestions!