Amplifier Parts

S-H205 Fuse Holder - 3AG-Type, High Quality
High quality fuse holder used with 3AG type fuse. Fits in a 1/2" diameter chassis hole. Frame and cap material: phenolic Terminal material: Nickel-plated brass Mounted by nut
$2.06
P-H1082N Corner - Steel, 2-Hole, 18 Gauge, Nickel
Use where total material thickness is 1/2" or more. Works on carpet or vinyl, 18 gauge steel, 1/2" radius. Radius is.50" from the center hole to furthermost edge. Sold individually. See S-H101 for mounting hardware.
$0.90
P-H1084N Corner - Steel, 2-Hole, 18 Gauge, ¾" Thickness
Steel, 2-Hole corner. Replacement for Fender® Corner wraps around inside edge of cabinet. See S-H101 for mounting hardware.
  • Works on ¾" of wood + material thickness
  • 18 gauge steel
  • ½" radius
  • For Fender®
  • Sold individually.
$0.90
P-H1090 Corner - Marshall, Black Plastic, 4-Hole, Rear, with rivets
Package of 4
Marshall back corners with gold rivets. ¾" radius.
$6.95
On Backorder
P-H1091 Corner - Marshall, Black Plastic, 3-Hole, with rivets
Package of 4
Front corner set, 3/4" radius. Includes gold rivets. Sold in package of 4
$6.75
On Backorder
P-SP2-500 Receptacle - AC, Mates with S-W123 & S-W124 with Fuse Holder
I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
$1.85
S-H100 Screw - 1", Flat top Phillips, Stainless Steel
Package of 4
1" stainless steel Phillips head, flat top screw.
$1.40
S-HMR-XG Rivets - Marshall, Gold, for fastening
Gold rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
P-H1087N Corner - 2-Hole, 20 Gauge
Corner wraps around inside edge of cabinet. Works on 3/4" of wood + material thickness. Countersunk mount holes, 20 gauge, 1/2" radius. Sold individually. See S-H102 for mounting hardware.
$0.95
P-H1097 Corner - Black steel, 2-Hole, 18 Gauge, Notched
2-leg notched, black, wraparound. 18 gauge steel, ½" radius. Sold individually.
$1.10
S-H203 Fuse Holder Cap - Peavey
Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.
$2.95
S-H200 Fuse Holder - for Marshall, ¼" Fuses
Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes). Suitable for 1/4" fuses. UL and CSA approved. Electrical Specifications:
  • Rated current: 10A
  • Rated voltage: 250V AC
  • Contact resistance: 2MΩ @ 250V DC or less
  • Dialectric withstand: 1 minute @ 1500V AC
  • Insulation resistance: 100MΩ or more @ 500V DC
$4.65
P-H1098 Corner - Black Steel, 2-Hole, 18 Gauge, Wraparound, Lip
2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.
$1.10
S-HMR-XS Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
P-H299 Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Package of 4
Pure Vintage 2-screw mount amplifier, package of 4, screws included.
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes eight mounting screws
  • Introduced on Blonde, Brown, and Blackface™-era amplifiers
  • Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
$7.95
P-H1099 Corner - Black Steel, 3-Hole, 18 Gauge
3-leg black, standard. 18 gauge steel, ½" radius. Sold individually.
$1.10
S-H204 Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length.
$3.50
P-H1092 Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
$9.00
On Backorder
P-H1095 Corner - Peavey, Black Steel, 2-Hole, Lip
Black metal, 2 hole with lip, radius ½". Sold individually.
$1.50
P-H1080N Corner - Steel, 3-Hole, 18 Gauge
Industry standard 3-leg back side corner cover for vinyl or carpet covered cabinets. 18 gauge steel, 1/2" radius. Sold individually. See S-H101 for mounting hardware.
$0.85
P-H266X Corner - Black Plastic, 4-Hole, Heavy Duty, Chevron
Heavy duty plastic, stacking chevron corner. Ideal for carpet covered cabinets. See S-H102 for mounting hardware.
Starting at $0.70
P-H298 Corners - Fender, for amplifier, Steel, 3-Hole with hardware
Package of 4
Pure Vintage 3-screw mount amplifier corners
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes 12 mounting screws
  • Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin® amplifiers
$7.95
P-H1086N Corner - Steel, 3-Hole, 20 Gauge
11mm / 7/16" Radius, 20 Gauge Steel (Sold individually)
$0.90
P-H1050 Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
$1.25
Don't see what you're looking for? Send us your product suggestions!