1. Home
  2. Products
  3. Amplifier Parts

Amplifier Parts

Fender

Fender® - Founded in Fullerton California by Leo Fender, Fender Musical Instruments Corp is the world's foremost manufacturer of guitars, basses, amplifiers and related equipment dating back to the 1940's.
products per page
P-H264 Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
$2.30
P-H264X Chassis Strap - Fender, vintage amplifier
Package of 2
Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.
$9.95
P-H332-X Handle - Fender, Vinyl, Silver Caps, 1 screw per cap
Colors Available:
Pure Vintage Amplifier Handle (1-screw mount). Vintage style amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps. Includes mounting hardware (two screws and T-nuts)
Starting at $9.45
P-H250 Foot - Fender, vintage Sphinx Glides
Package of 4
Keep your amplifier protected and looking great by replacing missing or damaged feet with new genuine Fender nickel-plated "Sphinx Glide" amplifier feet. Metal amplifier cabinet glide feet with rubber bushings and mounting screws. Fender part number: 099-3900-000
$8.95
S-M912 Logo - Fender, Blackface, silver on black
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
  • Genuine Fender Blackface amplifier logo
  • Mounting screws included
  • Designed for Super-Sonic™ series, ’94 Twin-Amp™, Pro Reverb™, Prosonic™, Concert Reverb™, ’65 Twin Reverb®, ’65 Deluxe Reverb®, ’65 Super Reverb®, Machete™, ’65 Princeton® Reverb, ’64 Vibroverb™, ’68 Custom Princeton, ’68 Custom Twin Reverb, ’68 Custom Deluxe Reverb, Steel King, Jazz-King™, Cyber Twin®, VM series, Princeton Recording Amp, Bassman® Pro series, Stage™ 1000, Deluxe™ 900 and Princeton 650 amplifiers plus others.
$16.50
P-H516 Relay - Fender®, DPDT, 24 V, replacement
Original Fender®, DPDT, 24V, used in Blues Deluxe®, Blues Deville®, Hot Rod Deluxe®, Hot Rod Deville®.
$3.15
P-H710 Capacitor Cover - Fender®, for Twin Reverb
Capacitor cover for Fender® Twin Reverb. Mounting centers are 7 1/8" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".
$16.95
P-H265X Tilt Back Leg Kit - Fender, for tilting amps
Package of 2
If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender® has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt you amp back so you can hear what you're doing!
  • BF Bandmaster, BF Twin Reverb, SF Bantam Bass, SF Pro Reverb, SF Vibrosonic Reverb, Blonde Bandmaster, BlondeTwin
  • Comes with mounting hardware
Starting at $40.95
P-H299 Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Package of 4
Pure Vintage 2-screw mount amplifier, package of 4, screws included.
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes eight mounting screws
  • Introduced on Blonde, Brown, and Blackface™-era amplifiers
  • Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
$8.45
P-H269X Handle - Fender®, molded Dogbone style
Colors Available:
Original Fender® handle, brown molded dogbone style. 6" center to center. Includes mounting hardware. Fender part number: 099-0946-000
$11.95
S-H110 Screws - Fender, 10-32x1.5", Phillips Head, Vintage Amp
Package of 12
Made for Fender® and used on a variety of vintage and contemporary models. Package contains twelve Phillips head (10-32 X 1-½") nickel machine screws used for mounting an amplifier chassis. Used on '57 Twin®, Blues Deluxe™/DeVille™, Pro Junior™, Hot Rod Deluxe™/DeVille™, Blues Junior™, '59 Bassman®, '63 Fender® Tube Reverb, Bronco™, Bass Breaker™, '57 Deluxe™, Bassman® TV Series, EC Twinolux™/Tremolux™, '57 Champ®, EC Vibro-Champ™, and '57 Bandmaster™ amplifiers manufactured from 1994-Present.
$5.85
S-M911-X Logo - Fender, Flat, silver with accent color
Accent Colors Available:
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
  • Genuine Fender® flat black amplifier logo
  • Mounting screws included
  • Designed for Bassman® series, Super-Sonic™ series and Vibro-King® series amplifiers plus others

Measurements:
  • Bottom Horizontal Mounting Holes Center-To-Center : 4.14” (150.1mm)
  • Top Horizontal Mounting Holes Center-To-Center : 3.18” (81.9mm)
  • Vertical Mounting Holes On “F” Center-To-Center : 1.98” (50.4mm)
  • Vertical Mounting Holes On “R” Center-To-Center : .98” (24.9mm)
Starting at $16.50
P-H331 Handle - Fender, Black Plastic, Silver Caps, 2 screws per cap
Pure Vintage Amplifier Handle (2-screw mount)
  • Black amplifier handle with vinyl sleeve over steel strap and two-screw end caps
  • Includes mounting hardware (four screws and T-nuts)
  • Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers
  • 8" center to center. 9 ¼" handle length without end caps.
$12.45
P-H711 Capacitor Cover - Fender®, for Reissue Vibroverb
Capacitor cover for Fender ® Reissue Vibroverb. Mounting centers are 5.75" x 3". Measurements are 6.25" x 3.5" x 1.42"
$23.95
S-H251 Piggyback Hardware - Fender, Thumb Screws
Package of 2
Thumb screws for piggyback amplifier, used for locking amp heads to cabs. Original Fender.
$11.95
P-L119 Jewel - Fender®, for lamps / bulbs, Aqua
Genuine Fender aqua jewel.
$7.95
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Package of 12
Hex nut for Fender® potentiometers. Package of 12.
$4.45
S-H253 Piggyback Hardware - Fender, Bushings
Package of 2
Pure Vintage Piggyback Bushings
  • Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
  • Internally threaded to accept piggyback thumbscrews (sold separately)
  • Introduced on Blonde and Blackface™-era amplifiers
  • Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
$16.95
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$4.10
S-M917 Logo - Fender, plate, for Tweed amplifier
Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.
  • Genuine Fender® tweed amp logo
  • Mounting pins included
  • Designed for
    • Pro Junior™
    • Blues Junior™
    • JazzMaster™ Ultralight
    • plus others

Fender part number: 099-409-6000
$19.95
P-STABLE Tube Stabilizer - Fender®, Hot Rod Series
Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
$9.45
P-H298 Corners - Fender, for amplifier, Steel, 3-Hole with hardware
Package of 4
Pure Vintage 3-screw mount amplifier corners
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes 12 mounting screws
  • Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin® amplifiers
$8.45
P-HCF-102 Amp Cover - Fender®, for 65 Deluxe Reverb
Black polyester cover or '65 Deluxe Reverb, black. Designed to fit '65 Deluxe Reverb® Reissue (1993-present) and Super-Sonic™ 22 Combo (2010-present) amplifiers
$22.95
P-HCF-104 Amp Cover - Fender®, for Super Reverb
For 1993 Super, 2001 Super Reverb (fits all). Fits the 2001 reissues and the original 60s amps. It might not fit on all the 70s versions. Dimensions: Height: 24" Width: 25" Depth: 9" top, 10 ½" bottom
$20.95
Don't see what you're looking for? Send us your product suggestions!