Products
No product page found for product accessorie.
Showing search results for accessorie
Switch - Fender®, Push SLFLK Short
Genuine Fender replacement switch. Push SLFLK Short Stroke. 6 pin PCB mount
$4.50
package of 2
Socket - 9 Pin, Plastic, ¾" mounting hole, top mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes
Please note: This socket will not work with tube retainer S-H144
- Top mount
- 3/4” chassis hole required
- 1-1/8” mounting centers
Please note: This socket will not work with tube retainer S-H144
$1.65
PCB - Marshall, Valve PCB TSL100 / TSL122, Rev 20
Marshall PC Board for TSL 100 / 122. Rev 20.
$209.95
Out of Stock
Cable - Power All, 5 Lead Right Angle Daisy Chain
Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the Power-All® ECO-Dapter® 9 VDC power supply to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).
$7.95
Plug - AC, Flat, Brown, vintage style two prong
A new two-prong plug, acceptable as a retro or vintage substitute. The plug easily accepts our twisted 18 and 16 gauge wires (two-conductor only). Wire Opening Diameter: 11.2 mm x 8.4 mm, 7/16" x 5/16" UL Rating: 15A-125V Made in Mexico
$2.75
Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length. Fits into S-H213
$3.50
Spoiler String Retainer - Vibramate
Vibramate String Spoiler For Bigsby Vibratos The Vibramate String Spoiler is an ingenious little bracket designed to fit right onto your existing Bigsby vibrato without any modifications or special tools. It easily slips right into place and is held in position by the tension of the strings when tuned to pitch. The Spoiler makes string changes so easy you'll wonder how you ever lived without it. No more need for wrapping the strings around and under the vibrato roller with needle-nose pliers in an attempt to get the ball onto that little pin. Multiple color options available.
Colors Available:
Starting at $29.95
Egg Crate - for Storing Vacuum Tubes
15 x 15" egg crate packing box designed for storing tubes. Supplied unassembled. Each size is capable of holding a different number of tubes. For cartons see S-B127X
Starting at $10.95
Refill Pack for Ultimate Fret Polishing System - Lizard Spit
This pack includes 24 fresh fret polishing pads for use with the Lizard Spit Ultimate Fret Polishing System, S-CMP15.
$4.50
package of 24
Battery Holder with Connector - 9V, Chassis Mount, Horizontal
High quality chassis mount battery holder with a built-in connector. This clip fits standard 9V batteries. The horizontal mount and small footprint of the holder allows for easy placement where vertical space is limited. The two connections use individual solder tabs for hard wiring directly into projects providing a rugged and stable connection.
$5.45
Tube Converter - Yellow Jacket® YJShort, for reduced-size amps
The YJShort is shorter than the standard YJS converter, allowing for use in amps that do not have room for the standard converters. It is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps which use 6L6, EL34, 6550 or 6V6 output tubes
$36.95
Socket - 9 Pin, ¾" mounting hole, PC Mount
9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes. Features:
- Top mount
- 3/4” tail diameter
- 1-1/8” mounting center
$3.44
Battery Box - Gotoh, BB-04, Single, 9 volt
Single 9 volt battery box. See P-ECB-9V1B for single battery box with removable adapter. See P-ECB-9V2 for double battery box.
$14.95
Guitar strings - Fender, Electric, Original 150s
If you're trying to capture the original vintage tone of pure nickel wound strings; string up a set of Original 150s! Deliver a smooth feel with reduced finger noise. Rich, warm tone with abundant harmonics. Perfect for blues, jazz and classic rock. They're pure Fender tone through and through. Made in the USA. Pure Nickel Wound Gauge Sets: .010 - .046 contains .010, .013, .017, .026, .036, .046 .009 - .042 contains .009, .011, .016, .024, .032, .042 .011 - .049 contains .011, .014, .018, .028, .038, .049
Starting at $6.95
package of 6
Socket - 7 Pin, Miniature, Ceramic, with Shield Base
7-pin tube socket with shield base commonly used for preamp tubes
- Top mount
- 5/8” chassis hole required
- 7/8” mounting centers
- Shield Base
$1.20
Tube Base - 8 Pin Octal, Phenolic, 5/8” Height
8-pin octal base made of brown phenolic. This base is shorter than the P-SP8-479 base and matches bases used on many common octal tubes. The base has a 5/8“ height with approximately 7/16” of internal mounting depth.
$3.39
Socket - 9 Pin, Ceramic, PC Mount, Gold Pins
9-pin ceramic tube socket with gold pins commonly used for preamp tubes or EL84 power tubes
- PC mount
- 7/8” tail diameter
- Gold pins
$3.89
Fuse Holder Cap - Peavey, top-slotted for screwdriver
Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.
$5.65
Socket - 4 Pin, Ceramic Plate, bottom-mount
Bottom mount ceramic socket has bossed mounting holes and recessed rivets to allow sub-panel mounting. Socket fits 300B, 811 size tubes.
$4.99
Fuse Block - For GMA / GMD Fuses, Low Profile
Open frame fuse block for GMA or GMD 5×20mm size fuses with a low profile design that features solder terminals made of tin plated brass. A unique design feature provides self-alignment of the clips to the fuse caps. This feature, plus a one-piece clip/terminal design, assures low contact resistance.
$4.95
Socket - 9 Pin, Ceramic, PC Mount with Aluminum Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
- Top mount with PC pins
- 1-15/16” shield height
- 7/8” chassis hole required
- 1” mounting centers
- 13/16” tail diameter
- Includes shield
$2.95
Cable - Grover, Instrument, Noiseless, Braided, Gold-Plated Plug
A 6.5mm noiseless cable equipped ¼" straight molded phone plug ends. Specifically designed cables prevent shocks and allows for minimum hum or noise. Provides 100% signal! Braided Fabric Covered Cable with Gold Plated Plugs
Starting at $11.25
Lubrication - Lizard Spit, Slick Nutz Slot Lube, 1 oz.
Nut slot graphite lubricant. Doesn't collect dust or absorb sound. Self drying, all natural, non-petroleum, non-toxic
$10.75
Alignment Kit - GC Electronics, for color TVs
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
Tools are:
- 8282 Zenith type Hex/Screwdriver
- 8606 5" Hex wrench
- 9091 Hex iron core tool
- 9300 5" Double sided hex tool
- 9304 Hex screwdriver combination
- 8608 Potentiometer Adjustment Tool
$8.45
package of 6