Products
No product page found for product accessorie.
Showing search results for accessorie
Power Jack - DC PC Mount, 5.5mm External, 2.1mm Internal
This PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
$0.64
Socket - 9 Pin Miniature, Ceramic Base, Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
- Top mount
- 1-15/16” shield height
- 7/8” chassis hole required
- 1-1/8” mounting centers
- Includes shield
$3.30
Fuse Holder - Clip, GMA-Type, PCB Mount
Through-hole PCB mounted fuse holder clips found in Peavey amps and other electronics. These small clips allow for minimal space fuse mourning directly on PCB’s. Fits GMA 5×20mm fuses. A pair is required to mount a fuse. Sold individually.
$0.39
Battery Holder - 9V, Chassis Mount, Vertical
High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The vertical mount and small footprint of the holder are great for narrow spaces and work well for any project. See S-H158 for horizontal-mount.
$1.25
Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
- Bottom mount
- 1-1/4” chassis hole required
- 1-1/2” mounting centers
$3.55
Fuse Holder - 3AG-Type, Low Profile, Slotted, Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile slotted cap and reduced overall height. It is a similar style to fuse holders used on many vintage Marshall amps. Mounting nut and rubber washer included.
$3.25
Socket - 8 Pin, Phenolic, MIP, top mount
8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.
*Please Note: The S-H142 tube clip is not compatible with this socket.
- Top mount
- 1 3/16" to 1 ¼".chassis hole required
- 1-1/2” mounting centers
*Please Note: The S-H142 tube clip is not compatible with this socket.
$5.50
Socket - 9 Pin, Miniature, Plastic, PC Mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes.
- Standoff, PC mount
- 3/4” tail diameter
$1.89
Tube Base - 8 Pin octal, 1.25" diameter
Used for vacuum tube octal plug or coil form. 1-¼" dia. x 7/8" high.
Colors Available:
$3.45
Mounting Plate - for wavy washer sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
$1.90
Socket - Belton, Micalex, 8 Pin, Octal PC Mount, Long Lead
Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
Features:
- Convenient top or bottom mount capabilities
- 1-1/4” chassis hole required
- 1-1/2” oblong mounting centers
Features:
- Paddle saddle mounting
- Easy mount with the saddle of extruded screw hole
- Phosphorous bronze pin terminal with tin plating
- Glassfiber filled PPS Insulating material
- Long leads
$3.85
Socket - 9 Pin, Miniature, Ceramic, Chassis Mount
9-pin tube socket commonly used for preamp tubes or EL84 power tubes
- Bottom mount
- 1-15/16” shield height
- 25/32”/ .76” chassis hole required
- 1-1/8” mounting centers
$1.70
Receptacle - AC with Fuse Holder, mates with S-W123 & S-W124
I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
$1.85
Ring for Retainer - rubber, fits KT88 and 6550 Tubes
Rubber ring for retainer S-H143 fits KT88 and 6550 tubes. Dampens vibration.
$0.80
Fuse Holder - 3AG-Type, Tweed Style, Solder Lug
Panel mount 3AG fuse holder with solder lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
$4.70
Cable Tie Mount - Nylon, Adhesive Backing
Nylon cable tie mounts with adhesive backing. These mounts easily attach to most surfaces using a strong foam adhesive. Zip ties can be fed through the openings on the mount to secure wires to an enclosure, board, or any other convenient location.
Colors Available:
Starting at $1.50
package of 5
Pedal Box - 7 ⅛” x 5” x 3", Fits 1590XX, 1590X
High quality crush-proof boxes that are perfectly sized for stompboxes. This cardboard box features triple wall sides and double wall front and bottom ensuring a safe housing for your pedals. The inside dimensions 7 ⅛” x 5” x 3" fit 1590XX, 1590X, and smaller sized pedals along with accessories such as power supplies or cables.. These boxes are ideal for storing or packaging effects pedals.
See S-B418 for boxes to fit 1590B, 1590G, 1590N1 / 125B enclosures.
See S-B430 for boxes to fit 1590BB, 1590N1 / 125B enclosures.
See S-B418 for boxes to fit 1590B, 1590G, 1590N1 / 125B enclosures.
See S-B430 for boxes to fit 1590BB, 1590N1 / 125B enclosures.
$1.95
Solid State Rectifier - For 5AR4, 5U4, 5Y3 Tubes
Solid State Rectifier Direct plug-in replacement for 5AR4, 5U4 and 5Y3 rectifier vacuum tubes in amplifiers with center tapped secondary power transformer. Use when less 'sag' is desired in the power supply; just switch back to the tube rectifier when 'sag' is desired.
$9.95
Socket - Belton, 8 Pin, for Auto Wave Soldering
Belton 8-pin tube socket specifically designed for auto-wave soldering .Applicable for all types of electronic equipment using vacuum tubes.
Features:
- 1-3/16” chassis hole required
- Mounting centers are 1 ½", 1 13/16"
Features:
- Safety attachment with 3 positions of mounting pins
- Easy mount with the precise designed tube pins
- Glassfiber filled PPS insulating material
$3.50
Fuse Holder - for Marshall, ¼" Fuses
Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes). Suitable for 1/4" fuses. UL and CSA approved. Electrical Specifications:
- Rated current: 10A
- Rated voltage: 250V AC
- Contact resistance: 2MΩ @ 250V DC or less
- Dialectric withstand: 1 minute @ 1500V AC
- Insulation resistance: 100MΩ or more @ 500V DC
$5.99
Power Jack - Cliff, DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
High quality PCB mounted DC jack made by Cliff. This style of PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
Colors Available:
Starting at $1.79
Socket - 9 Pin, Standoff Ceramic PC Mount
9-pin ceramic tube socket with stand-off mounting. commonly used for preamp tubes or EL84 power tubes.
- Standoff, PC mount
- 0.822” outer diameter
- 3/4” tail diameter
$2.25
Socket Saver - 9 Pin Miniature, for reducing wear and tear
9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.
$4.29
Keyway - Replacement piece for octal tubes
Do you have valuable octal type tubes that work fine except the keyway has been broken off the base? Fix it with this simple and inexpensive product. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.
$11.95
package of 4