Products
No product page found for product accessorie.
Showing search results for accessorie
Socket - 8 Pin, Phenolic, top mount
8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.
- Top mount
- 1” to 1-1/8” chassis hole required
- 1-1/2” mounting centers
$5.15
Socket - 8 Pin Octal, Ceramic, with Separate Retaining Ring
8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Great replacement for Fender, Marshall and others.
- Convenient top or bottom mount capabilities
- Includes mounting bracket
- Spade type pins
- 1-1/16” to 1-1/8” chassis hole required
- 1-7/16” oblong mounting centers
$2.25
Socket - 9 Pin, Miniature, Plastic, PC Mount
9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes.
- Standoff, PC mount
- 3/4” tail diameter
$1.89
Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
P-ST8-CVR
P-ST8-ST9-CNVRT
- 9 pin (noval) socket hole cover
- 5mm x 3.5mm mounting holes
- 27.1mm center to center
P-ST8-CVR
- 8 pin (octal) socket hole cover
- 6.5mm x 3.5mm mounting holes
- 40mm center to center
P-ST8-ST9-CNVRT
- 8 pin to 9 pin (octal to noval) socket adapter
- Bottom mount 9 pin socket recommended
Starting at $2.50
Fuse Block - for 3AB and 3AG fuses, low profile
Open frame fuse holder with patented self-aligning, snap-in terminal clips. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The uniqu design permits self-alignment of clips to fuse cap. This, plus a one-piece clip / terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips.
$3.10
Cord - Replacement Brown, Polarized Plug
Brown SPT-1 power cable
- polarized
- tinned leads
- 6 foot length
- 18 AWG
$2.95
Socket - 8 pin octal, Fork Connectors, 1" with Bracket
Ceramic Tube socket used for octal power tubes.
- Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
- Mounting Centers: 1-1/2” with oblong mounting holes
$2.80
Power Jack - DC PC Mount, 5.5mm External, 2.1mm Internal
This PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
$0.64
Battery Clip - Vintage Style, 9 Volt, Fiberboard Frame
9V battery clip with a fiberboard frame. This high quality battery snap features tinned brass eyelets that secure the nickel-plated steel contacts to the fiberboard. Wires can be soldered directly to the eyelets allowing for custom length battery connections. This fiberboard style is similar to the 9V battery connectors in vintage electronics such as the Arbiter Fuzz Face.
$1.20
Vacuum Tube Retainer - for 12AX7 Tubes
Mounting Centers = 1", Overall Height = 2.2". Keeps common preamp tubes in place while dampening vibrations to reduce microphonics. Supports a maximum tube height of 2.1 inches
$1.99
LED Lens - Flat Cylindrical, Fresnel, Polycarbonate, 5mm
Panel mount LED lenses made of high quality polycarbonate. These flat cylindrical lenses provide a unique retro appearance with a small panel footprint and work well in any project using LED indicators. Features:
Colors Available:
- ¼” mounting hole
- For panel thicknesses of 1/16” to ⅛”
- Fresnel lens
- Flat cylindrical shape
- Fits standard 5mm LEDs
Starting at $0.65
Socket - 7 Pin, Miniature, Ceramic with Mounting Ring
Ceramic 7-pin socket with center shield and mounting bracket.
- Convenient top or bottom mounting capabilities
- 5/8” chassis hole required
- 7/8” mounting centers
$2.50
Battery Holder - 9V, Chassis Mount, Horizontal
High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The horizontal mount and small footprint of the holder allows for easy placement where vertical space is limited.
$1.25
Washer - 0.25" Inside Diameter, Felt
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.99
package of 5
Fuse Holder - 3AG-Type, Low Profile, Knob, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.
$5.95
Socket - 9 Pin, Ceramic, PC Mount, with center shield
9-pin ceramic tube socket with center shield lug and PC pins commonly used for preamp tubes or EL84 power tubes
- PC mount
- 7/8” chassis hole required
- ⅞" tail diameter
$2.19
Strain Relief - for ¾" x ~\frac{27}{32}~" hole, ~\frac{5}{16}~" cord diameter
16/3 SJT, 5/16" cord diameter. These one piece Strain Relief Bushings securely anchor, absorb, and protect cables and wires from push/pull and twist forces, while insulating them from irregular or sharp panel edges. They are easily and quickly installed with special installation pliers or other hand or production tools. Black H.S. Nylon, and the temperature index is 105° Centigrade.
$1.29
Socket - 7 Pin, Miniature, Ceramic, with Aluminum Shield
7-pin tube socket commonly used for preamp tubes. Shield Included.
- Top mount
- 1-7/8” shield height
- 5/8” chassis hole required
- 7/8” mounting centers
- Includes Shield
$1.30
Lubrication - Dr. Duck's, Ax Wax & String Lube, Organic
For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.
$9.95
Battery Holder - 9V, Chassis Mount, Vertical
High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The vertical mount and small footprint of the holder are great for narrow spaces and work well for any project. See S-H158 for horizontal-mount.
$1.25
Socket - 9 pin miniature, ceramic, bottom or top mount
Ceramic tube socket commonly used for preamp tubes or EL84 power tubes.
- Chassis hole: 7/8”
- Mounting Centers: 1-1/8”
- Bottom or top mount
$1.50
Power Jack - DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
½" panel mount DC jack with solder lugs. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch.
$0.64
Battery - 9V, Carbon Zinc, GP, Greencell, Extra Heavy Duty
Extra heavy duty carbon zinc batteries from GP. The GP Greencell 9V is a favorite for fuzz pedals and is the stock battery for many boutique builders such as D*A*M and others. Additionally, these batteries are a great choice for any low current battery powered pedal or other devices.
$3.25