Products
No product page found for product accessorie.
Showing search results for accessorie
Bulk Cable - Rapco, Instrument, Mini, 0.195” O.D.
Made in USA instrument cable with a 0.195” outer diameter. This high quality cable is perfect for pedal boards patch cables and also works great for standard instrument cables.
- 20AWG stranded bare copper conductor
- Polyethylene insulation covered by a sheet of conductive vinyl
- Copper braid shield
- PVC outer jacket
$0.69
Sold by the foot
Battery Clip - Premium, 9 Volt, Rigid Frame, I-Style
Premium 9V battery clip with a rigid plastic frame and I-style wire orientation. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
$1.20
Socket - Belton, 9 Pin, for Auto-Wave Soldering
Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.
Features:
- 3/4” PC hole
- 1-1/8” mounting centers
Features:
- Safety attachment with 3 positions of mounting pins
- Easy mount with the precise designed tube pins
- Glassfiber filled PPS insulating material
$2.75
Socket - 9 Pin, Ceramic with Center Shield and Shield Base
9-pin ceramic tube socket with attached shield base commonly used for preamp tubes or EL84 power tubes (without shield)
- Top mount
- 7/8” chassis hole required
- 1-1/8” mounting centers
- P-SS9-325 and P-SS9-325XL are compatible tube shields.
$1.70
Power Jack - Cliff, DC Panel Mount, Rear Mount, 5.5mm External, 2.1mm Internal
High quality ½" panel mount DC jack with solder lugs from Cliff Electronic Components. This jack is rear mounted which makes troubleshooting and repairs simpler since the jack does not need to be desoldered if the circuit needs to be removed from the enclosure. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder lugs are available for tip, ring, and switch. Mounting nut included.
$1.35
Plug - 8-Pin octal tube base, Black Plastic
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
$1.95
Socket - 9 Pin, Ceramic with Center Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
- Bottom mount
- 3/4” chassis hole required
- 1-1/8” mounting centers
$1.70
Strain Relief - Nylon, 0.3", 2 or 3 Conductor Wire
Nylon strain relief for two or three conductor round wires ranging from 0.25” to 0.30” in diameter. Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on flexible power cords. Securely anchors, insulates, and protects cable at panel entry points. Fits 0.5” x 0.45” mounting holes with 0.62” panel thickness.
This is a direct fit for many vintage Fender amps with 2-prong cables, allowing for conversion to 3-prong SVT cables (such as S-W142) with the appropriate outer diameter.
This is a direct fit for many vintage Fender amps with 2-prong cables, allowing for conversion to 3-prong SVT cables (such as S-W142) with the appropriate outer diameter.
$0.85
Retainer - Fits KT88 / 6550 Size Tubes
For use with guitar amps and applications where KT88/6550 is suspended upside down in the chassis.
$2.94
Socket - Belton, 9 Pin, Crimped with Shield Base, PC mount
Belton 9-pin tube socket, crimped with shield base. Applicable for use with all types of electronic equipment using vacuum tubes.
Features:
- Top mount, PC pins
- 3/4” tail diameter
- 1-1/8” mounting centers
Features:
- Paddle saddle mounting
- Phosphorous bronze pin terminal with tin plating
- Glassfiber filled PPS Insulating material
- Easy mount with collar attached socket
$2.95
Cable Clip - Open Arm Clip, Self Adhesive Aluminum
Self adhesive metal cable clips. They easily attach to most surfaces using a strong foam adhesive. These cable clips are a great way to tidy up project wiring and securing components.
Starting at $1.25
package of 5
Turret Strip - Socket Mount , Gold Plated Copper, Single Row
Single row turret strips with a tab for mounting directly to tube socket mounting holes. The screw mount turrets are made of gold plated brass and are pre-mounted to the 2mm thick boards. The mounting hole is 0.15” in diameter. These turret strips are a great option for components connecting to the socket lugs of point to point builds.
Starting at $2.70
Strain Relief - for ~\frac{35}{64}~" x ⅝" Hole, .062" Panel Thickness
1/16” (.062 in.) panel thickness version of the Fender® style strain relief for 35/64" x ⅝” chassis holes and 11/32” cord diameter. Fits many Fender® amps with 1/16” thick chassis.
- Protects the lifeline of your electric/ electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.
- Securely anchors, insulates, and protects cables at panel entry points
$1.15
Knob Springs - for half moon / D shafts
Assortment of knob springs for 1/2 moon shaft. 3/8" high x 9/32" outside dia. "D" shaped package of 6.
$0.99
package of 6
Transistor Socket - Mill Max, 3 Pin, Machine Pin, Through Hole
High quality TO package transistor sockets by Mill-Max. These machine pin sockets make swapping transistors in pedals and other projects a simple process. These use a standard TO footprint so they are ready for use on PCBs with matching footprints.
$2.75
Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Starting at $1.25
Grommet - Rubber, for Reverb Tank vibration
Mount these rubber grommets to the base of reverb tanks to help alleviate feedback and other vibration issues. The thick rubber ring helps with isolating the tank from the surface that it is mounted to or resting upon. These rubber grommets fit typical reverb tanks.
- Mounting Hole Diameter = 3/8"
- Outer Diameter = 1/2".
$1.30
package of 4
Tube Shield - For 9-Pin, Aluminum, Extra Long
Extra long (70mm) aluminum tube shield for noval tubes. Ideal for tubes that are longer than a standard preamp tube such as the 6CG7, 12BH7, etc.
- Includes shield base
- Designed for longer than standard pre-amp tubes
- Sold individually
- Compatible with P-ST9-212
$1.70
Cord - Replacement Black, Non-Polarized
Black SPT-1 power cable
- non-polarized
- tinned leads
- 6 foot length
- 18 AWG.
$2.44
Fuse - Fast-Blow, 250V, 3AG, 0.25" x 1.25"
Protect your expensive investment or hobby with inexpensive fuses.
Starting at $2.25
package of 5
Socket - 8 Pin, 1" Chassis Hole, 1-¼" Mounting Centers
8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
- Bottom mount
- Includes mounting bracket
- 1” chassis hole required
- 1 ¼" mounting centers
$4.35
Machine Pin Socket - Preci-Dip, Break Away, 1 Row, 15 Position
High quality single row machine pin sockets made by Preci-Dip. These sockets are the break-away type and can easily snap into smaller sizes such as 5 separate transistor sockets.
$1.65