1/4" Jack - Cliff, solder lugs, switched
Starting at: $1.95
Solder terminals, switched. Used in modern Marshall amps.
For white version, see S-H951-X
- Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
- Tough, molded grade 1 black Nylon body.
- Made in the U.K.
- Supplied with a black nylon hexagonal mounting nut
- Designed to receive both mono and stereo ¼" jack plugs
|Withstand Voltage:||2000VDC Min.|
|Temperature Rating:||-10°C ~ +70°C|
|Life (Minimum):||10,000+ Operations|
|Nominal Contact Resistance:||< 50 mΩ|
|Channel||Our Part Number||UPC/EAN||Cliff Electronics Part Number|
|Mono||S-H902||609722143431||S2/BBB Solder Tag|
|Stereo||S-H905||609722143493||S2/BBB Solder Tag|
|Current, maximum||5 A|
|Item Height||23.0 mm|
|Item Length||22.8 mm|
|Item Width||20.1 mm|
|Life, minimum||≥ 10,000 operations|
|Nominal Contact Resistance||< 50 mΩ|
|Nut Diameter||11.3 mm|
|Temperature Rating||-10°C ~ 70°C|
|Withstand Voltage||2,000 VDC per minute|
|Packaging Dimensions||Mono version||1.309 in. × 0.775 in. × 0.963 in.|
|Stereo version||0.774 in. × 0.936 in. × 1.324 in.|
|Weight (Packaging)||Mono version||0.012 lbs.|
|Stereo version||0.014 lbs.|
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers Hi, I am replacing my cabinet speakers,the old jack needs some work (ie desoldering, etc). Will this type jack work in a 4x12 1960b jcm800?
1 answers Will this work on Marshall MG50?
1 answers 7200 marshall bass amp input jack will it work?
1 answers I noticed that the solderpins are much wider on the replacements.Will they fit in the board without further modifications?
Asked by Anonymous on June 6th, 2017.
It is really hard for us to determine if these are going to be compatible with the circuit you are working on. The best thing to do is compare the dimensions in the spec sheet attached above with your jack. If the terminal legs are too big then they may not fit on your board.