Gear - replacement for Wah pedal potentiometer

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

R-VWAH-POT-X Potentiometer - Wah replacement pot with gear
Standard vintage style wah pots with solder lugs and gear included. Part # R-VWAH-POT (100K) has an audio taper. All others are linear.
$5.95
P-ECB-151 Rubber feet - Dunlop, for Crybaby, includes screws
Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)
$3.95
package of 4
P-ECB-244 Battery Box - Dunlop, snap-in enclosure
Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.
$2.50
P-ECB-FI-02 Inductor - Dunlop, Fasel Toroidal Model, Red
This precision-wound toroidal will give the cleanest sound possible. Use the cup core model, part number P-ECB-FI-01 for a more vintage sound. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.
$16.95
P-ECB-126 Gear - Dunlop, replacement for Wah D-shaft pots
Original Dunlop replacement gear for wah potentiometers (C-ring included). The gear has 14 teeth and a flatted inner diameter to fit securely onto a potentiometer with flatted shaft. The included C-ring is placed over the top end of the gear to keep it from sliding off the end of the potentiometer shaft.
$4.95
P-ECB-127 Rack - Dunlop, replacement for wahs
Original Dunlop replacement rack for wah pedals (roll pin included: 0.77" length x 0.07" diameter - for mounting the rack to the treadle). The rack has 14 teeth and mounts to the underside of the treadle piece (rocking structure) of a wah pedal. The teeth of the rack interlock with the teeth of the wah potentiometer gear (i.e. pinion), thereby rotating the potentiometer's shaft as the treadle is rocked back and forth.
$2.79
P-ECB-124 Grommets - Dunlop, Offset, 3x4 Different Sizes
Original Dunlop offset grommets (i.e. rubber bumpers) used on the underside of the treadle piece (rocking structure) of wah pedal enclosures. Made in USA.
$7.30
package of 12
P-ECB-78 Potentiometer - Dunlop, Wah, 10 kΩ linear
Genuine Dunlop replacement potentiometer for wah/volume.
  • 10 kΩ Linear
  • Gear included
$17.95
P-ECB-24B Potentiometer - Dunlop, Hot Potz II Crybaby, 100 kΩ
Hot Potz II Crybaby Pot. for newer Crybaby models. Made by Beckman. 100 kΩ. Original Dunlop replacement part. The same tone and sweep characteristics as the original Cry Baby Hot Potz potentiometer with low wiper noise and extended life.
$20.95
P-ECB-31 Felt Pad - Dunlop, replacement for Wahs
Replacement Dunlop felt pad for use with wah pedals. This circular felt pad has an adhesive side for an easy installation. The pad is typically installed on the underside of the pedal directly above the footswitch to cushion the contact when switching the wah on and off. Made in USA.
$1.59
W-SC-11 ¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $2.35
W-SC-12A ¼" Jack - Switchcraft, Mono, shunt tip
Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer
Starting at $2.75
P-K344X Knob - Plastic, Set Screw, Small MXR Style, 0.75" diameter
Colors Available:
Small plastic knobs with set screw and brass insert. Similar to the small knobs used on many Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.
Starting at $0.85
R-I Resistors - 0.5 Watt, Carbon Composition
Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types. Standard 'classic' resistor. Sold in multiples of 5. 10% tolerance.
$3.45
package of 5
Partially Out of Stock
P-K300X Knob - Chicken Head, set screw, brass inset
Colors Available:
  • Fits ¼" Solid Shafts (Set Screw)
  • Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
  • Brass Set Screw and Insert
  • High Quality Plastic
Starting at $1.30
C-R82-X Capacitor - Kemet, R82 Series, Polyester, 5mm Spacing
High quality R82 Series box film capacitors from Kemet. These polyester film capacitors have 5mm lead spacing, a minimum voltage rating of 63VDC, and a tolerance of ±10% or better. The small size, high specifications, and radial mounting makes them an excellent choice for PCB builds of pedals, synthesizer, and other audio equipment. The R82 Series is constructed of metallized polyester film with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94V–0 requirements.
  • Voltage rating: 63 VDC Minimum
  • Lead Spacing: 5 mm
  • Capacitance tolerance: ±10% or better
  • Operating temperature range of -55˚C to +105˚C
  • RoHS compliance and lead-free terminations
  • Self-healing
Starting at $0.25
R-N Resistors - ¼ Watt, Metal Film, 1% tolerance
Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Package of 5. These resistors are perfect for pedal builders! 1/4 watt.
Starting at $0.45
package of 5
P-K315-1-X Knob - Vintage "cupcake" style, set screw, brass insert
Colors Available:
Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.
Starting at $1.99
P-Q1N400X Diode - General purpose rectifier, 1A, 1N400X
A semiconductor device which passes current in the forward direction (from anode to cathode), and blocks current in the opposite direction.
Starting at $0.30
P-K345X Knob - Plastic, Set Screw, MXR Style, 1.0" Diameter
Colors Available:
Large plastic knobs with set screw and brass insert. Similar to the knobs used on many classic Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.
Starting at $1.15