Vacuum Tube - 5751, JJ Electronics
The JJ Electronic 5751 is a dual triode that can be used in place of most 12AX7 circuits. The rugged build of this tube and reduced gain (30% less than a 12AX7) can improve headroom and give better control in high gain stages allowing users to more easily dial in sweet spots. The JJ 5751 features a smooth and balanced tone and a detailed response with low noise and low microphonics.
SKU:
T-5751-JJ
Item ID:
008542
UPC/EAN:
609722134255
JJ Electronics Part Number:
5751
Brand:
JJ Electronics
Type:
Accessory Items:
Body Height | 49.2 mm | ||
Filament Current (If) | 350 / 175 mA | ||
Filament Voltage (Uf) | 6.3 / 12.6 V | ||
Gain (μ) | 70 | ||
Grid Voltage (Ug) | ≥ -50 V, -1 V typical | ||
Grid capacitance (cg1) | 1.6 pF | ||
Grid to Plate Capacitance (ca/g) | 1.7 pF | ||
Internal Resistance (Ri) | 58 kΩ | ||
Item Diameter | 22 mm | ||
Item Height | 56.3 mm | ||
Plate Capacitance (ca) | 0.33 pF | ||
Plate Current (Ia) | 0.8 mA | ||
Plate Dissipation (Wa) | ≤ 1 W | ||
Plate Voltage (Ua) | ≤ 300 V, 100 V typical | ||
Transconductance (S) | 1.2 mA/V |
Packaging Dimensions | 0.9 in. × 0.9 in. × 2.3 in. | ||
Weight (Packaging) | 0.05 lbs. |
Specification Sheet | All Models |
My Project Lists
Specifications, Files, and Documents
Questions? Contact us at [email protected], or give us a call at 480-296-0890
Product Reviews
Fantastic seller!!! Best prices online & ultra fast shipping!!! AAA+++ 🎸
Affordable tubes that really work well in my Vox AC4 Handwired. I wanted something a bit less gainy on the extreme settings and these work and sound great. JJ tubes are a good priced standard issue type tube, work well for the money are are easy to get ordered.
This tubes woke up and also tamed my Blackstar HT40. Great purchase
I saw the 12AX7 comparison here at Amplified Parts and noticed the positive description of this tube and its relatively low price so gave it a try. It has a very nice warm clean tone that breaks up nicely when pushed. This would be a good tube to try out a 5751 in your V.1.
Great tube and no problems with amplified parts!
With most new tubes, I initially hate that way they sound. Takes a while for them to burn-in and sometimes I never get the sound or tone I was looking for. I've been through all sorts of new production and NOS tubes through the years. It's very rare that I will find a tube that I actually like to listen to right away. These JJ 5751's fit the category of "enjoy listening to now". I'm honestly surprised because I bought these to use as substitute for some very nice quality NOS tubes. I figured I would use the JJ 5751's for a while to preserve my expensive NOS tubes. The JJ's sound so nice, I may just leave them in there and sell the NOS tubes. Running them in a Jolida 3502S Integrated Amp, with JJ 12AT7 gold pin driver tubes s and Gold Lion KT77 power tubes.
Added 2 to a 6505MH and they provide a much wider range of use on the gain.
nice tube, immediately tamed my peavey valvekings harshness to cream
Bought a couple of these to use in the preamp of my Orange OR-15. I really like the sound and they give you just a little more headroom range on the gain knob.
So far I'm pretty pleased. Running it in V1 to calm down the preamp drive in a 15w tube combo. Definitely does the trick. Going to have to play with the other tubes a bit because the volume took a noticeable step back. Running with a JJs 12AX7MG in V2 and 12AT7 in the phase inverter.