1/4" Jack - Cliff, Solder Lug, for Marshall, metal nut

Cliff
Pictured: Mono
Pictured: Mono
Pictured: Mono
Pictured: Mono
Pictured: Mono
Pictured: Mono
Pictured: Stereo
Pictured: Stereo
Click to zoom in
Pictured: MonoPictured: MonoPictured: MonoPictured: Stereo
Customer Images:
No Images yet! Submit a product image below!

1/4" Jack - Cliff, Solder Lug, for Marshall, metal nut

Starting at: $2.95
In Stock

Solder terminals, switched. Metal ferrule, vintage style.

For the switched version, see S-H971-X.

Features:

  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a metal hexagonal mounting nut
  • Designed to receive both mono and stereo ¼" jack plugs
Withstand Voltage: 2000VDC Min.
Maximum Current: 5A
Temperature Rating: -10°C ~ +70°C
Life (Minimum): 10,000+ Operations
Nominal Contact Resistance: < 50 mΩ
Part Numbers
ChannelOur Part NumberUPC/EANCliff Electronics Part Number
MonoS-H901609722156769 S4/BNB Solder Tag
StereoS-H901-S609722143424 S4/BBB Solder Tag
Chassis Hole Diameter0.438 in.
Current, maximum5 A
Item Height23.0 mm
Item Length22.8 mm
Item Width20.1 mm
Life, minimum≥ 10,000 operations
Nominal Contact Resistance< 50 mΩ
Nut Diameter11.3 mm
Temperature Rating-10°C ~ 70°C
U.S. Thread Major Diameter0.375 in.
U.S. Thread Pitch20 tpi.
Withstand Voltage2,000 VDC per minute
Packaging Information
Packaging Dimensions1.286 in. × 0.775 in. × 0.94 in.
Weight (Packaging)0.0198 lbs.
S-H901 - Mono versionChassis Hole Diameter0.438 in.
Current, maximum5 A
Item Height23.0 mm
Item Length22.8 mm
Item Width20.1 mm
Life, minimum≥ 10,000 operations
Nominal Contact Resistance< 50 mΩ
Nut Diameter11.3 mm
Temperature Rating-10°C ~ 70°C
U.S. Thread Major Diameter0.375 in.
U.S. Thread Pitch20 tpi.
Withstand Voltage2,000 VDC per minute
S-H901-S - Stereo versionChassis Hole Diameter0.438 in.
Current, maximum5 A
Item Height23.0 mm
Item Length22.8 mm
Item Width20.1 mm
Life, minimum≥ 10,000 operations
Nominal Contact Resistance< 50 mΩ
Nut Diameter11.3 mm
Temperature Rating-10°C ~ 70°C
U.S. Thread Major Diameter0.375 in.
U.S. Thread Pitch20 tpi.
Withstand Voltage2,000 VDC per minute

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Specification Sheet Specification Sheet117.56 KB
Questions? Contact us at [email protected], or give us a call at 480-296-0890

Product Reviews

5.00 out of 5 based on 7 reviews
Chris Kraemer - October 31st, 2023
5 out of 5

These Cliff 1/4 Mono (switchable) jacks are terrific, and a little bit hard to find. These require a 7/16th hole for the panel mount, and look great when installed. The switchable input are very good for guitar amp inputs, so you can short them out when not plugged in.

jhjanko - June 20th, 2023
5 out of 5

Accept no substitutes. These are the best.

Tor Atle Madsen - September 4th, 2021
5 out of 5

Great product

Robert Von Herndon - October 4th, 2020
5 out of 5

Very good quality jacks. Very positive 'snap' when cable is inserted. Lugs take solder easily without need of sanding or tinning.

Greg B - August 26th, 2020
5 out of 5

Good product and worked as intended. I would purchase from this company again. Thanks

Clayton Custom Cabs - June 2nd, 2020
5 out of 5

Just what the Dr. ordered, quality piece and perfect replacement.

David F - June 17th, 2018
5 out of 5

Good replacement for PCB mounted jacks - did so in my Jet City when I lowered the board and replaced the pots with full size ones. Works well, easy to solder into the lugs.