Radio Kit - 2 Tube Regenerative Radio
This radio kit will cover the AM radio band along with the SW radio band. Power for this receiver is 1.5 V DC for the filaments and 45V DC for the plate current. A D cell and five 9V transistor batteries wired in series will work to power this radio. A 2000 ohm headset or an audio amplifier is required. Requires two T-1T4_DF91 tubes (not included).
RoHS Compliant
Accessory Items:
Filament Voltage (Uf) | 1.5 VDC | ||
Headset / Amplifier Resistance | 2 kΩ | ||
Plate Voltage (Ua) | 45 VDC |
Packaging Dimensions | 8.6 in. × 7.8 in. × 3 in. | ||
Weight (Packaging) | 0.9877 lbs. |
Instructions | All Models |
Layout and Schematic | All Models |
My Project Lists
Questions? Contact us at [email protected], or give us a call at 480-296-0890
Product Reviews
The kit was incomplete. I already knew it didn't come with the 1t4 vacuum tubes. Not sure what happened but there just wasn't enough nuts for mounting both the tube socket and coil taps. Also the instructions were a hard to follow. It simply was not a good experience. This resulted in a failed attempt to get the radio working properly using the components and instructions that were supplied. I ended up taking it completely apart and made my own front panel and base. After sourcing mounting hardware and better capacitors I was able to get the radio working. This was the worst kit I have ever purchased.