Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.

Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.

The Punch BP 10/150 is a 10" ferrite speaker with 150 watts of power. Punch Sound speakers offer great dynamics and super-fast response, giving the player an extremely solid bass sound. Equipped with ferrite magnets and steel baskets, they are ideal for classic styles where a clean, tight and bright sound is required. The 10'' bass speaker provides good projection with minimal effort especially in a two or four 10'' cabinet. The sound is powerful in either a single or multi speaker combination.

This guitar pick punch is great for making your own guitar picks out of a wide variety of material. Two pick sheets are included but it is also great for making novelty picks out of old gift cards, IDs, credit cards, hotel key cards, and anything else you can think of.
This pick punch makes a great gift for any guitar player.

The Punch BP 8/150 is a 8" ferrite speaker with 150 watts of power. Punch Sound speakers offer great dynamics and super-fast response, giving the player an extremely solid bass sound. Equipped with ferrite magnets and steel baskets, they are ideal for classic styles where a clean, tight and bright sound is required. The 8'' bass speaker provides a tight bass tone with crisp mids. The tone is very clear overall.

Instructions

• Simply drill 3/8" hole insert cutting head and compress handles.
• Gives you the ability to make square holes for fuse holders, special connectors displays etc.

1. Material to be nibbled is placed in the gap between the punch and blade channel.
2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
3. A scribe line can be followed by looking down on work in this position.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. JBA is the most represented in J-Bass style pickup line of WSC. Overwound for more punch, midrange, bass, and output, and delivers '60s Jazz Bass tone. It is constructed with Alnico 5 magnets and Formvar magnet wire for serious thump and growl.

The beloved Creamback is finally in a 10 inch package. The G10 Creamback is hand-built in the U.K. using the same materials and construction techniques as its 12” counterparts. The Creamback series offers increased power handling with a vintage British voicing.

The Seismic / Shift is a JFET boost based on one of the earliest effects to ever be used on stage. This pedal adds subtle color to a guitar's sound while maintaining the natural tone of the guitar. It packs a serious punch that can cut through any mix when soloing or whenever some extra “umph” is required. The Seismic Shift pairs nicely with amps and other pedals. Place it ahead of tubes, preamps, overdrives, distortions, and fuzz pedals to shift your gear onto a new level. The Seismic Shift pedal kit is the introduction to the Nexus Series from Mod Electronics. This series features a PCB base rather than the Mod Electronics’ traditional point-to-point wiring kits to offer builders an even wider variety of effects to build. The Seismic Shift kit is designed for all skill sets and is the perfect first build for those unfamiliar with PCB construction. The pedal operates on both 9VDC and 18VDC.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. PBA pickup uses Alnico 5 rod magnets and a knifeedge gloss-cover hot coil wind that delivers a forceful sound with pushed midrange but tight bass and treble response. This pickup provides the humbucking punch and boom associated with the electric bass.

The Tornado Stealth 80 is the Neodymium counterpart of the ceramic powered Electric Lightning. The Stealth 80 is extremely efficient, with slightly scooped mids, and it shines in the cleanest as well as in the heaviest tonal applications. It delivers exceptional punch and attack, retaining all the clarity needed for palm-muted riffs and power chords, as well as crystal clear clean rhythm playing.

The Neo Creamback is every ounce a Classic Celestion, delivering all the magical tone you’d get from a traditional Creamback. The difference is, it’s built with a neodymium magnet: making this speaker around half the weight of a traditional ceramic magnet speaker. Celestion’s engineers have developed a new and innovative way to better harness the mighty forces of the neodymium magnet, enabling them to create a guitar speaker that can deliver authentic Creamback tone with ease, while preserving the benefit of neodymium’s much lighter weight. You still get the low end punch, warm, vocal midrange and sweet refined highs the Creamback is famous for: push it hard and enjoy the ‘race-car growl’ that sets pulses racing. But pick up a cab that’s loaded with Neo Creambacks and you’ll see what makes this speaker truly different.

Few speakers speak ‘classic rock’ like the Neodymium powered Tornado Stealth 65. Sharing a similar 1 ¾” voice coil design with the Nighthawk, it delivers vintage and modern rock tones with ease and authority. With a well-controlled top end, a typical British-voiced midrange and fat, warm bass range, the Tornado Stealth 65 is an ideal choice for classic flavored rock tones. Very easy to drive for any amplifier, it allows even the smaller sized open back combo amps to rock with bigger-than-life tones.

The BTSE-16FX Effect board provides 16 different digital audio effects to be used for mixers or other audio applications that require sound enhancement. Equipped with the superb quality digital effects processing engine which it adds that extra punch needed to make audio presentations truly stand out.

British lead/rhythm guitar 12" speaker. The epitome of British tone with a complete tonal balance, grunt and punch in the lows, warm/tailored mids, and nice, clear, open/airy highs.

A firm favourite with lead guitarists, the Classic Lead features a tightly controlled low-end, with strong high bass / low mid punch, aggressive mid range attack and a powerful yet controlled top-end. for power chords it has the tone to make its presence felt but the subtle high-frequency roll-off makes it ideal for solos, able to project single notes on loud stages without becoming shrill. Celestion Classic Series guitar speaker. Developed in the late 1970s, the Classic Lead uses a fibreglass voice coil former to deliver an 80W power rating and a unique dynamic sound.

A worthy successor to the Vintage 10, the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs an impressive punch with its 60W power handling. With the fast response of a 10" but with the strong and creamy vocal tones of a 12", the G10 is the ideal choice to add depth to hollow-sounding amps, or for players who want to get humbucker-type girth from single-coils. Can be used singly to add vocal warmth to small valve combos, or in quartets for a weightier but still lively attack.

The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:

• Guitar/ Keyboard/Bass amplifiers and combos
• Audio mixing consoles / Powered mixing consoles
• Stand -alone stereo effect units for studio and PA usage
• Effects pedals

Light in weight but certainly not in performance, the BN10-200X neodymium bass speaker delivers a rich warm tone combined with a powerful low end punch.

12-inch bass speaker delivers an ideal combination of responsiveness and rock solid low end. This highly efficient, lightweight neodymium bass speaker is a strong performer whatever your rhythmic style.

This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. These tubes can cover a spectrum of sounds and styles all within the same amplifier.

2N404A PNP germanium transistors. The 2N404A is used in many fuzz pedals along with other effects. The 2N404A is the same as the 2N404 but with a higher voltage rating. This transistor is in a TO-5 package with long leads commonly found on germanium transistors. For a lower voltage version of this transistor, see P-Q2N404.

The Tube Amp Doctor premium selected 12AX7 / ECC83-Cz features big, warm, clean sounds with a mellow top-end when pushed to overdrive. It’s a great choice for guitar amps and HiFi alike. The ECC83-Cz is recommended if you want to emphasize punchy mids and is especially great when pushed into a fat overdrive. The TAD™ ECC83-Cz is a miniature, high-mu twin triode with good gain, round deep bass, somewhat compressed mids and very smooth top end. Selected and recommended for guitar amps to smoothen up the tone or for HiFi to shape the body of sound more to “that” tube tone. Best for jazzy and thick clean as well as for vintage bass response. Recommended for all positions in amps with medium gain level or High-Gain Amps for V2+ positions. As for V1 in general but especially for higher gain amps or phono/audio-amps, we recommend the RT030 7025/E83CC Highgrade, T-7025-HG-TAD.

A custom version of the JJ 6V6-S with a double top mica for increased stability. The double mica improves support for the tube structure and reduces mechanical vibrations in its components. These double mica 6V6 tubes are a great option for combo amps and any amplifiers exposed to speaker vibrations. The JJ Electronic 6V6S is another modern classic from JJ. This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it to handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. The highs come in clean and smooth with a lot of clarity. The mids are full and distinctive. The lows are fat and punchy. These tubes can cover a spectrum of sounds and styles all within the same amplifier.