Genuine Gretsch G5400 Blacktop Filter'Tron pickups. Includes silver mounting ring, three pickup mounting screws with springs, and four mounting screws for the ring. These pickups feature a pre-wired connector for solderless connections.

The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.

The TL-Classic neck is an authentic take on the tele neck pickup. With Alnico 5 rod magnets, vulcanized fiberboard flatwork, and a long skirted cover, the TL-Classic neck offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.

Has your original Split-Tube run out of lipstick? Now you don't have to modify your favorite instrument. Bring your guitar back to the original sound you loved and install correct sized replacement pickups for Danelectro®, Silvertone®, and Coral® Split-Tube™ pickups.

• ALNICO MAGNET/D.C. resistance = 4.9K
• Magnet dimensions in millimeters = 62 long X 3 thick X 13 wide.

The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.

The TL-Classic bridge is an authentic take on the tele bridge pickup. With flat Alnico 5 pole pieces, vulcanized fiberboard flatwork, and a copper plated base plate, the TL-Classic bridge offers a truly vintage experience. This pickup is wax potted for sonic stability and uses cloth pushback wire for an easy and clean install. Mounting screws and springs are included. Made in Japan.

Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.

The ST-Classic is an amazing homage to the 1960’s strat pickup. With staggered Alnico 5 rod magnets, vulcanized fiberboard flatwork, and enamel coated wire, the ST-Classic offers a truly vintage sound. These pickups are wax potted for sonic stability, feature a bevel on the magnets, and use cloth pushback wire for an easy and clean install. A cover, mounting screws and springs are included. Made in Japan.

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.

Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.

The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.

High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.

Black knob with white line, silver top, set screw and brass insert. Fits ¼" shaft with set screw. These Boss style knobs come in a variety of sizes. See P-K383X for an unskirted version.

High quality Marshall style knobs with set screws. These knobs are available with the classic gold and silver top caps as well as an all black version. These knobs use a slotted set screw and fit 1/4 in. (6.35mm) pot shafts. 0.77" diameter x 0.62" tall.

Original, made in USA, fillister head screws for use as polepieces in pickups. These premium polepieces have a 5-40 threading with a 0.75” length.

One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.

Switchcraft Switch Tip for Gibson Pickup Selectors. Threading: 8-32. Replacement for Gibson: PRTK-010