1/4" Jack - Rean, Stereo, Horizontal, Switched, Plastic Nut, PC
3 pole horizontal ¼" jack, all contacts switched, gold plated contacts, plastic housing with nut and washer
SKU:
W-RN-904-G
Item ID:
041206
UPC/EAN:
841358108112
Rean Neutrik Part Number:
NYS216G
Brand:
Rean
RoHS Compliant
Item Height | 16.5 mm | ||
Item Length | 33 mm | ||
Item Width | 20 mm | ||
Mounting Hole Diameter | 11.4 mm | ||
Washer Inner Diameter | 11.3 mm | ||
Washer Outer Diameter | 15.3 mm |
Packaging Dimensions | 1.305 in. × 0.785 in. × 0.61 in. | ||
Weight (Packaging) | 0.0154 lbs. |
Specification Sheet | All Models |
My Project Lists
Specifications, Files, and Documents
Questions? Contact us at [email protected], or give us a call at 480-296-0890
Customers who purchased this item also bought
- Resistors - 2 Watt, Metal Oxide, Power
- Switch Accessory - Mini Toggle Caps, Standard Bat, 11 Colors
- Footswitch - 4PDT, Black, Solder Lugs
- Potentiometer - Alpha, Linear, 3/8" Bushing
- 1/4" Jack - Rean, horizontal, switched, PC mount
- Regulator - LM317T, Adjustable Output, 1.5A, Linear Voltage Regulator
Product Reviews
I REALLY like these jacks. I purchased these Neutrik jacks for a project: NMJ6HFD2-AU and they DO NOT grab anywhere near as well as the Rean jacks. Come on. Great value!
Kind of scary looking at first but a very practical and most often used Jack found in a lot of different type Amplifiers. Often refered to as a Stereo Jack or T-R-S (Tip-Ring-Sleeve) type you can quickly convert it to a MONO Jack if needed in a hurry. Just take a small pair of side cutting pliers and cut out the center leg pin that goes in the Printed Circuit Board. Now take a needle file and file what is left sticking up down even with the bottom of the jack so it fits flush on the Printed Circuit Board when you install it. No need to try and remove the Center contacts because they are touching the ground side of your jack plug anyway and add extra stability holding the plug in place. Works great if you need a Mono Jack in a hurry and don't have one.