Cable - Power All, Grey Battery Snap Jumper
Included in the PA-9ECB Basic Kit and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.
Cable-Grey is 158.75 mm (approximately 5.25 inches) in length from plug to plug.
NOTE: The Power-All Cable-Grey was designed to hook directly to the battery snap inside a pedal and then provide power to the pedal using an external DC power adaptor. The wiring of the Cable-Grey’s battery snap is the OPPOSITE of what would normally be needed to connect to a 9-Volt battery. In other words, the small connecting post carries positive (to connect to the larger, positive post on the pedal’s battery snap) and the larger connecting post carries negative (to connect to the smaller, negative post on the pedal’s battery snap).
Whether you’re using the Power-All® ECO-Dapter® 9 VDC power supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
Cable Length | 5.25 in. between plugs | ||
Cable Size | 26 gauge |
Packaging Dimensions | 3.085 in. × 2.5 in. × 0.475 in. | ||
Weight (Packaging) | 0.0309 lbs. |
My Project Lists
Customers who purchased this item also bought
- Cable - Power All, Green Right Angle Line-6 Extension Jumper
- Cable - Power All, Blue Right Angle Phone Plug Extension Jumper
- Rubber feet - Dunlop, for Crybaby, includes screws
- Battery Box - Dunlop, snap-in enclosure
- Footswitch - ST Professional, 4PST, Latching, Solder Lugs
- Heat Sink - dissipate heat during soldering
Product Reviews
Perfect for my vintage MXR Phase 90 - a prior owner had already notched the case for a battery eliminator (that had a noticeable hum), so this adapter really did the trick.